LASFIT H11 LED Bulb LED Fog Light Bulbs User Manual

LASFIT H11 LED Bulb LED Fog Light Bulbs User Manual

Product Specification

Input Power
luminous Flux(LM)
Color Temperature
Operating Voltage
Waterproof Level
lighting Source
Built-in Driver

Warranty & Customer Service

45 Days Money-Back Guarantee(the return shipping label provided)
2 Years Hassle-Free Warranty
24 Hours Email Response
Local Support Service in Ontario, California
cs@lasfit.com
909-758-7900

Note: Our warranty will NOT cover installation service, labor cost, diagnostics or any other expense related to item being defective/damage.

Troubleshooting

1. 1 installed your bulbs but they do not turn on?
   We first would highly recommend checking your fuses, if the fuses are good, next we would recommend putting back the stock bulbs to see if they light up. If they do light up then the LED bulbs may be defective, please contact us for support by email.

2. Why is my bulb flickering/dimming or dashboard error message occurring?
   The wattage of LED bulb is lower than the stock halogen bulb, and the computer inspection system checks it’s abnormal and causes compatible issues. The canbus decoder maybe requ ired, please contact us for support by email.

3. How do I know if my vehicle requires extra can bus decoders?
   – The LED bulbs keep flickering when they are working.
   -An error code indicator appears on the dash.
   – The LED bulbs stay lit for a while even after you have switched them off.
   – The bulbs give off a dim light unlike the bright throw of LEDs.

4. How does a can bus decoder/load resistor work?
   The can bus decoders/load resistors help LED bulbs get approved in the computer inspection system by increasing the wattage or providing more information.

5. Why my daytime running lights/DRLs are not working or flickering?
   For some vehicles, the high beam and DRLs share the same bulb. The DRLs might have compatibility issue after installing, a decoder is needed to solve the issue.
   You can contact us through our service email with your vehicle make/model/year.

6. Can I install the H7 LED Bulb with the original adapter?
   Yes, absolutely, please use the factory adapter, do not need any aftermarket retainer/adapter.

NOTE:
– For safety consideration, please turn off the lights before installation.
– If the LED bulbs don’t work or cause an error code on the dash, please contact us for support by email or ca lling us! Do not attempt to repair the product by yourself!

Installation Instructions

H8/H9/H11/Hl6, 9005/HB3, 9006/HB4,9008/H13, Hl0/9145/9140

⚠ Caution

1. Please test the LED bulbs before full installation.
2. The temperature of the original bulb can be very high so please mind the heat.
3. Do not touch the LED chips when changing the bulb.

Hl, H3, H4, H7

⚠ Caution

1. Please test the LED bulbs before full installation.
2. The temperature of the original bulb can be very high so please mind the heat.
3. Do not touch the LED chips when changing the bulb.

9004, 9007

⚠ Caution

1. Please test the LED bulbs before full installation.
2.  The temperature of the original bulb can be very high so please mind the heat.
3. Do not touch the LED chips when changing the bulb.

Decoder and Notification

Some vehicles may have compatible issues, such as flickering, error code or radio interference, the can bus decoder or load resistors probably are required.
Please contact us for support by email if you’re not sure if you need the can bus decoder or load resistors.

1:1 Perfect Halogen Replacement ! Fanless  and Noiseless!

Email: cs@lasflt.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>