LASFIT 3157 LED Bulb Reverse Lights User Manual
- May 15, 2024
- LASFIT
Table of Contents
LASFIT 3157 LED Bulb Reverse Lights
Important Notice
Package Contents:
- 2 pcs LASFIT LED Kits.
Please Note:
- For safety considerations, please disconnect the power from your vehicle battery before installation.
- The LED bulbs have no polarity design, you don’t need to worry about positive and negative insertion, just install the LED lights on.
Installation
Universal Installation Steps (for reference only) 3156, 3157, 7440, 7443, 1156, 1157, BAU15S
- Step 1 Removing the Original Bulbs
- Open the hood of the vehicle and find the installation location of the halogen bulb
- Disconnect the power plug
- Take out the halogen bulb from the bulb housing directly
- Step 2 Plug-In and Test (Important and necessary)
- DO NOT complete the installation, just simply connect the power plug, and place the LED bulb in a safe area, then activate it.
- Step 3 Complete installation
- After successfully testing each LED bulb, swirl them into the housing and secure by rotating them into place or reapplying the secure latch.
Fit Size
Decoder and Notification
Some vehicles may meet Compatibility problems, such as flicker, error code and radio interference, here are the solutions:
- Try a Resistor Decoder. We appreciate you could contact us via message with your vehicle make/model/year to confirm which decoder can fit.
- Installation steps of the decoder:
- Upgrade to LASFIT Canbus Ready LED Bulbs. These LED Bulbs with built-in resistors, can solve the decoding problems of 95% of vehicles.
Product Specification
- Email: cs@lasfit.com.
- Call: 909-758-7900 Mon. – Fri. 9:00 am-5:30 pm (PST)
- Email: cs@lasfit.com.
- Call: 909-758-7900 Mon. – Fri. 9:00 am-5:30 pm (PST)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>