LASFIT H11 LED Headlight Bulbs User Manual
- June 17, 2024
- LASFIT
Table of Contents
LAair
LED LIGHTING
PRODUCT MANUAL
Installation Instructions
H11/H9/H16, 9005, 9006, 9008, H10/9145/9140, 5202/5201, 9012
|
---|---
1. Remove the original car halogen lamp.| 2. Insert the LED bulb lamp as the
direction of the arrow.
|
3. Rotate the lamp body clockwise and lock it into place.| 4. Connect LED
kits to original plug.
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
H1, H4, H7
|
---|---
1. Unlocking the latch and remove the original bulb.| 2. Insert the LED bulb
lamp as the direction of the arrow.
|
3. Reinstall factory latch.| 4. Connect LED kits to original plug.
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
9004, 9007
|
---|---
1. Rotate the original bulb holder counter-clockwise to remove it, take out
the bulb.| 2. Target the socket slots and insert the LED bulb.
|
3. Rotate the original bulb holder clockwise and lock it into place.| 4,
Connect LED kits to original plug.
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
Decoder and Notification
Some vehicles may have compatible issues, such as flickering, error code or
radio interference, the canbus decoder or load resistors probably are
required.
Please contact us for support by email if you’re not sure if you need the
canbus decoder or load resistors.
Product Specification
| Input Power | 200W/Combo |
|---|
100W/Set
50W/Bulb
Luminous Flux(Lm)| 20000LM/Combo
10000LM/Set
5000LM/Bulb
Color Temperature| 6000K
Operating Voltage| DC 12-16V
Waterproof Level| IP67
Lighting Source| CSP Flip Chips
Built-in Driver| Yes
Cooling System| High Efficiency Hydraulic Fan
Warranty & Customer Service
| 45 Days Money-Back Guarantee(the return shipping label provided)
---|---
| 1-Year Hassle-Free Warranty
| 24 Hours Email Response
| Local Support Service in Ontario, California
| cs@lasfit.com
| 909-758-7900
Frequently Asked Questions
I installed your bulbs but they do not turn on?
We first would highly recommend checking your fuses, if the fuses are good, next we would recommend putting back the stock bulbs to see if they light up. If they do light up then the LED bulbs may be defective, please contact us for support by email.
Why is my bulb flickering/dimming or dashboard error message occurring?
The wattage of LED bulb is lower than the stock halogen bulb, and the computer inspection system checks it's abnormal and causes compatible issues. The canbus decoder maybe required, please contact us for support by email.
How do I know if my vehicle requires extra can bus decoders?
- The LED bulbs keep flickering when they are working. - An error code indicator appears on the dash. - The LED bulbs stay lit for a while even after you have switched them off. - The bulbs give off a dim light unlike the bright throw of LEDs.
How does a canbus decoder/load resistor work?
The canbus decoders/load resistors help LED bulbs get approved in the computer inspection system by increasing the wattage or providing more information.
NOTE:
– For safety consideration, please turn off the lights before installation.
– If the LED bulbs don’t work or cause an error code on the dash, please
contact us for support by email or calling us! Do not attempt to repair the
product by yourself!
Email:cs@lasfit.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>