LASFIT 9006 LED Bulb User Manual
- June 17, 2024
- LASFIT
Table of Contents
PRODUCT MANUAL
Product Specification
| 140W/Combo|
---|---|---
Input Power| 70W/Set| 60W/Set for H7
| 35W/Bulb| 30W/Bulb for H7
| 14000LM/Combo|
Luminous Flux(Lm)| 7000LM/Set| 6000LM/Set for H7
| 3500LM/Bulb| 3000LM/Bulb for H7
Color Temperature| 6000K|
Operating Voltage| DC 12-16V
Waterproof Level| IP67
Lighting Source| CSP Flip Chips
Material| 6063 Heatsink Aluminium
Built-in Driver| Yes
Fan| High Efficiency Hydraulic Fan
Lifespan| Over 30,000 Hours
Operating Temperature| -49°F-302°F
Frequently Asked Questions
1. I installed your bulbs but they do not turn on?
We first would highly recommend checking your fuses, if the fuses are good, next we would recommend putting back the stock bulbs to see if they light up. If they do light up then the LED bulbs may be defective, please contact us for support by email.
2. Why is my bulb flickering/dimming or dashboard error message occurring?
The wattage of LED bulb is lower than the stock halogen bulb, and the computer inspection system checks it's abnormal and causes compatible issues. The canbus decoder maybe required, please contact us for support by email.
3. How do I know if my vehicle requires extra can bus decoders?
- The LED bulbs keep flickering when they are working. - An error code indicator appears on the dash. - The LED bulbs stay lit for a while even after you have switched them off. - The bulbs give off a dim light unlike the bright throw of LEDs.
4. How does a can bus decoder/load resistor work?
The can bus decoders/load resistors help LED bulbs get approved in the computer inspection system by increasing the wattage or providing more information.
5. Why my daytime running lights/DR Ls are not working or flickering?
5. Why my daytime running lights/DR Ls are not working or flickering?
Installation Instructions
H11/H9/H16, 9005, 9006, 9008, H10/9145/9140, 5202/5201, 9012, 880
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
Hl, H3, H4, H7
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
9004, 9007
Caution
- Please test the LED bulbs before full installation.
- The temperature of the original bulb can be very high so please mind the heat.
- Do not touch the LED chips when changing the bulb.
Warranty & Customer Service
| 45 Days Money-Back Guarantee(the return shipping label provided)
---|---
| 1 Year Hassle-Free Warranty
| 24 Hours Email Response
| Local Support Service in Ontario, California
| [email protected]
| 909-758-7900
**Notice
Our warranty will NOT cover installation service, labor cost, diagnostics or
any other expense related to item being defective/damage Email:
[email protected]**
All in one mini size design. See Wider, See Farther, See Better.
Email:[email protected]