etac My-Loo Toilet Seat Raiser with Brackets Instruction Manual

etac My-Loo Toilet Seat Raiser with Brackets Instruction

Reconditioning instruction/Re-use

General

• Etac My-Loo may be further used.
• Original spare parts from Etac should always be used.
• Remember that the service life of the product is limited (see manual). This is particularly important when prescribing the product to a user who is expected to use it for an extended period of time.

Washing

• Clean the product with normal nonabrasive cleaning agents (pH value of between 5-9). Rinse and dry. Disinfect the product with an alcohol-based disinfectant, 70%.
• The product can withstand cleaning in a sterilizer at 85°C for 3 minutes.

1. Raiser
   Check so that there are no cracks or damages.

2. Lid
   Check so that the lid is properly fixed and can be folded.
   Check so that there are no cracks or damages.

3. Friction pieces
   Check so that the friction pieces are properly fixed and that there are no damages.

4. Raiser fixing
   Check so that the raiser is fixed and can be folded up and down

5. Arm supports
   Check so that there are no cracks or damages.
   Check so that the arm support can be folded up and down

6. Height control
   Check so that there are no cracks or damages.
   Check so that the height control can be set in positions 1-3.

7. Assembly nut
   Check so that there are no cracks or damages.
   Check so that the assembly nut can be tightened.

8. Sleeve
   Check so that there are no cracks or damages.

9. Bushing
   Check so that there are no cracks or damages.

10. Locking handle
    Check so that there are no cracks or damages.
    Check so that the locking handle is fixed

11. Cover
    Check so that there are no cracks or damages.
    Check so that the cover can be clicked into place

12. Cover holder
    Check so that there are no cracks or damages.
    Check so that the cover can be clicked into place

13. Cover, arm support holder
    Check so that there are no cracks or damages.
    Check so that the cover can be clicked into place

14. Holster cover
    Check so that there are no cracks or damages.
    Check so that the cover is fixed

15. Attachment
    Check so that there are no cracks or damages.

16. Support leg
    Check so that the arm support can be folded
    Check so that the support leg attachment is ok and fixed

17. Support leg, parallel rod
    Check so that the parallel rod has no damages and is properly fixed
    Check so that the parallel rod attachment has no damages and is properly fixed

18. Support leg, adjustable ferrule
    Check so that the adjustable ferrule has no damages and can be adjusted

19. Screw kit for top mounting
    Check so that there are no cracks or damages in screws, washers, spacers and plugs.
    Check so that screw and plug can be mounted

Etac Supply Center AB Långgatan 12 SE-334 33 Anderstorp www.etac.com

References

• Etac - A world-leading developer of assistive devices

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>