Blackview BV5200 4G Rugged Phone User Guide

: June 9, 2024
: Blackview

Blackview BV5200 4G Rugged Phone User Guide

About The phone

What’s In the Box

Buttons and Connectors

Specification

Specs|
---|---
Model| BV5200
System| Andorid 12
OS| Doke OS 3.0
CE| IP68 &IP69K&MIL-STD-810H
RAM| 4GB
ROM| 32GB
Display Size| 6.088 Inches
Resolution| *7201560
Rear Camera| 13MP
Front Camera| 5MP
Processor| Quad Core
Battery capacity| 5180mAh
Max charging current| 5V2A
Weight| 268 Gram
USB type| Type-C
NFC| YES
Slots| 2 Nano sim & 1 SD**

Rugged Phone features

IP68&IP69K&MIL-STD-810H

Customize smart button functions

Getting Start

Power On

Turn on your Blackview BV5200 by pressing and holding the < Power> button (found on the right side of the phone) for a few seconds.

Setup Wizard

Upon booting up, use Google Wizard to setup your Google account, sync, setup…. Customize all the software buttons, gestures and other features to your liking. If you later change your mind or need to make adjustments, simply adjust all of the settings after setup in the settings menu.

Migrating Data

Via Migration Asistant, you are able to migrate files and datas to your new
Blackview BV5200. All you have to do is install the app on the old device, scan the QR code when prompted, and select the items you want to transfer.

Insert SIM and SD card

Take out the card slot and place the Nano card or TF card with the metal side facing down.
Make sure the bevel angle is aligned with the bevel angle of the card slot and placed in the corresponding card slot.
With the phone facing up, insert the card holder into the phone in the direction of the arrow.
Restart the smartphone.

Connect Internet and Multimedia

Connect with Wi-Fi

Swip the Statusbar Down, long press Wi-Fi
Tap a found network and enter passwords to connect to it. When connected, you’ll see in the status bar.

When Wi-Fi is on, your phone automatically reconnects to available networks it has used before.

Connect with Mobile network

After inserting SIM card and restart the phone, press the to switch network on.
Switch Mobile Network in use between two oprators.
a. Long prees to enter mobile network settings.
b. Press Default access and choose oprator corresponded.

Connect with Mobile network

What sould I do if I can’t connect with nerwork?
a. Check Statusbar to see if the signal is normal, if the signal simbol is poor, plese intend to move the phone to diffrent place.
b. If you can make phone calls but can’t connect with internet. Please check APN settings, and call your Telecom service provider for help.
How to set the APN: Click Settings – Click Sim card and mobile date – Choose Sim card – Click Access point names – Choose APN – Click Password.
Please change the password to the last four digits of the phone number.

Connect with a PC

You can charge your smartphone, share files and internet to PC via USB cable.

You will recieve a notification after insert the USB cable to PC, Tap it.

Connect with a PC
Choose function you need

Cast your screen to a TV

Long press to enter the interface of Screen Cast.
Press The three points to enable wireless display.
Then you will see Display that connecting to the same WLAN with BV5200, Press to Cast.

Doke OS

Blackview BV5200 comes pre-installed with Doke OS, our customized Android based OS which provides frequent updates and user-friendly features based on suggestions from over 10 million active users worldwide.

Split Screen

Long screenshoott

Press volume – and power button 1s to capture the screen.
Opt Long Screenshoot, then the screen will scroll down, tap the screen to capture the screen.

White list

By adding Apps to White list, you can keep them active in background, so you can recieve messages at real time, otherwise, the system will clear apps regularly for saving energy.

How to add Apps to White list?

If you don’t want the system clean Apps automatically, you can shut it down

Game Mode

In Game Mode, you can enjoy the game immsesively.

Note: To leave Game mode, you have to swip twice form side.

Q&A

How to contact Blackview After-Sale-Service? Send E-mail to: info@blackview.hk If you prefer on Amazon, press the Name of the shop and opt Ask a Question.
How to reset The smartphone. Press the Power button and volume + 10 seconds to enter Boot mode, Press volume down to enter recoverty mode, opt Wipe data/Factory mode, use volume key to choose and power key to confirm.
Why I can’t recieve message from social media (eg. Message”, Facebook) Check if the notification of the social media is on: Settings-Apps&Notifications-See all Apps-select the app-notification.
Check if the app is locked in White list.

EU Regulations

RED Declaration of Conformity

Blackview Communications Co., Ltd. hereby declares that this GSM / GPRS / EDGE / UMTS / LTE Digital Mobile Phone with Bluetooth and Wi-Fi
BV5200 is in compliance with the essential requirements and other relevant provisions of the RE
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.mi.com/en/certiﬁcation

RF Exposure Information (SAR)

This device is in compliance with Speciﬁc Absorption Rate (SAR) limits for general population/ uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) speciﬁed in Council
Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, this device was set to transmit at its highest certiﬁed power level in all tested frequency bands and placed in positions that simulate RF exposure during use against the head with no
separation and near the body with a separation of 5 mm.
SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. This device should be carried at least 5 mm away from the body to ensure RF exposure level is compliant or lower than the reported level. When attaching the device near the body, a belt clip or holster should be used which does not contain metallic components and allows a separation of at least 5 mm to be maintained between the device and the body. RF exposure compliance was not tested or certiﬁed with any accessory containing metal worn on the body, and use of such an accessory should be avoided.

Certification Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg,
SAR Value: Head: 0.597 W/Kg, Body: 0.870 W/Kg (5 mm distance).

Frequency Bands and Power

This mobile phone offers the following frequency bands in US areas and maximumradio-frequency power:
·2G Network: GSM: 850/900/1800/1900(B2/B3/B5/B8)
·3G Network: WCDMA: B2/B4/B5/B8
·4G Network: FDD: B2/B3/B4/B5/B7/B12/B13/B17/B25/B26/B66 TDD:B41
Support Carriers: T-Mobile, BTC, MetroPCS, H2O, Movistar, Telcel, Tigo, Claro, Vivacom, Ultra Mobile,
lycamobile, Tello Mobile, Bell Wireless, Rogers Wireless, Chatr, Luck Mobile, Virgin Mobile, Telus, Fido,
FIZZ, Shaw Mobile, etc.
Does not compatible with AT&T SIM Card or Cricket Wireless SIM Card. Does not work with CDMA
Network Carriers such as Verizon, Sprint, Boost Mobile, Straight Talk or U.S.Cellular!

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving
Increase the separation between the equipment and

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

This device meets

RF Exposure Information (SAR)

the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.5 cm from the body. RF exposure compliance with any body-worn accessory that contains metal was not tested and certified, and use of such body-worn accessory should be avoided. Any accessory used with this device for body-worn operation must keep the device a minimum

of 1.5 cm away from the body.

FCC Note

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.