Shenzhen Zhenghaixin Technology WA2024 Wireless Charger User Manual
- June 9, 2024
- Shenzhen Zhenghaixin Technology
Table of Contents
Shenzhen Zhenghaixin Technology WA2024 Wireless Charger
Product description
Thank you for choosing our wireless charger, before you use this product, please read this manual carefully and keep it properly
Product parameters
- Name: wireless charger
- Model:ZHX WA20
- Interface: Type C
- Input:9V=2A Max
- Watch magnetic output: 3W Max
- Lightning output: 5V=1A
- Output power: up to 10W
- Compatibility: Airpods1/2/3/Pro, Apple Watch3 7/SE Wiring: USB A to USB C 1 meter
- Material: PC+ABS
- Product size:117××75X49.3mm (without packaging) Product weight: 109g (without packaging)
Packing list
- Wireless Charger x1
- Charging cable x1
- User Manualx1
Direction for use
- Insert the USB A port of the charging cable into the adapter port, the other end of the Type C port into the product port, put the watch in the launch area, and the watch will automatically adsorb when it is close to the product.(The watch will prompt charging)
- Insert the headset with the Lightning charging port into the Lightning male socket, support forward and reverse insertion.(The headphone indicator light indicates charging)
Safety Guidance
- Do not charge at high temperature, the applicable operating temperature range is 0· C to 35· C. Storage temperature range is 20 C to 60· C.
- Improper use/placement of this product may result in shortened product life or damage; pay attention to moisture proof, waterproof,and drop proof;
- Do not disassemble,modify or repair the wireless charger by yourself;
- Do not place metal or other objects around the wireless charging area; do not place magnetic stripe cards (such as credit cards, phone cards,bankbooks and record cards) near the wireless charger when charging. Avoid the magnetic field generated by the wireless charger from damaging the magnetic stripe card This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>