Shenzhen Zhenghaixin Technology ZHX-WA23 3 In 1 Wireless Charger User Manual
- June 9, 2024
- Shenzhen Zhenghaixin Technology
Table of Contents
Shenzhen Zhenghaixin Technology ZHX-WA23 3 In 1 Wireless Charger
Product Diagram
Product description
Thank you for choosing our wireless charger, before you use this
product,please read this manual carefully and keep it properly
Product parameters
- Name: 3 in 1 Wireless Charger
- Model: ZHX-WA23
- Interface: Type-C/USB 2.0
- Input: 5V 2A 9V 2A 12V 1.5A
- Watch Wireless Output: 3W Max
- Earphong Charging box Wireless Output: 3W Max
- Mobile Phone Wireless Output: 5W/7.5W/10W/15W Max
- Output Power: 18W Max
- Compatibility: iPhonel2-13-14 full series, Airpods2/3/Pro and Ql standard wireless charging equipment, Apple Watch1-8/SE/ULTRA
- Material: ABS+ PC
- Product Size: D60.3mmx10.6mm (Without Packaging)
Packing list
- Wireless Charger xl
- User Manualxl
Instructions for use
- Plug the charging cable Type-C or USB 2.0 interface into the adapter,place the watch in the corresponding launch area, and automatically adsorb the watch after getting close to the product. (The watch “clicks” and fills as soon as it is inhaled)
- Place the mobile phone in the corresponding transmiSSion area to ensure that the position of the receiving area of the mobile phone and the wireless charging and transmitting area is consistent (generally the receiving area is in the middle of the mobile phone), and the product will be automatically adsorbed after being close to the mobile phone.
(Mobile phone “ding-dong” is charged as soon as it is inhaled) 3. Put the Ql standard with wireless function of the headphone box into the wireless charging area, the headphone box charging face facing the launch area of the product, the headphone light is lit.
Safety guidance
- Do not charge at high temperature, the applicable operating temperature range is 0-C to 35.C. Storage temperature range is-20.C to 60.c.
- Improper use/placement of this product may result in shortened product lite or damage; pay attention to moisture-proot, waterproof,and drop-proof;
- Do not disassemble, modify or repair the wireless charger by yourself;
- Do not place metal or other objects around the wireless charging area; do not place magnetic stripe cards (such as credit cards,phone cards, bankbooks and record cards) near the wireless charger when charging. Avoid the magnetic field generated by the wireless charger trom damaging the magnetic stripe card.
FCC Statement
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarante that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interterence by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modificat for compliance could void the user’s authority to
operate the equipment. ons not expressly approved by the party responsible
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>