FOX Wi-R1S1P-P Single Switch 1-Channel Relay Module User Manual
- June 9, 2024
- FOX
Table of Contents
SINGLE SWITCH
Wi-R1S1P-P
1-channel
relay module
www.fif.com.pl/fox/dimmer
F&F Filipowski sp. j.; Konstantynowska 79/81, 95-200 Pabianice, POLAND
www.fif.com.pl; e-mail:
biuro@fif.com.pl
System capabilities
» Communication via home Wi-Fi network;
» Remote access to devices via the Polish F&F cloud;
» Integration with Google and Google Home voice assistant;
» Ability to work autonomously, without a Wi-Fi connection;
» Advanced programmable timers based on online calendars and enhanced with
astronomical functions;
» Free mobile applications for Android and iOS.
Properties
» Brightness control of 230 V light sources, including dimmable LED ¹ lighting up to 180 W ²;
» Ability to connect a local momentary push button to switch the light on and
off (short press) and to control the brightness (long press);
» Setting a given brightness level using the mobile application and
programmable timers;
» Built-in clock with power backup and backup copy of the work program
guarantees proper operation also without a Wi-Fi connection;
» REST API support enabling integration of the controller also with other home
automation systems;
» Built-in thermal protection;
» Convenient installation in an installation box with a diameter of Ø60 mm.
- The maximum load capacity depends on the temperature and operating conditions of the device. Prolonged operation at such high load may lead to tripping of the thermal protection and disconnectuion of the controlled circuits.
Configuration
For the initial configuration of the Fox module, it is necessary to download
and run the free Fox application available for mobile devices running the
system:
» Android, version 5.0 or higher;
» iOS, version 12 or higher.
You can download the app directly from the stores:
|
---|---
https://play.google.com/store/apps/details?id=pl.com.fif.fox|
https://apps.apple.com/us/app/fox/id1580578557
or via the website:
On the above page, you can also find detailed information on how to configure and operate the devices and the Fox mobile app.
Wiring diagram
Description of terminals
S local control button input (default – R ON/OFF function)
N power supply – neutral wire
N power supply – neutral wire (N terminals connected inside of the device)
L power supply – phase wire
COM internal relay COM contact
NO internal relay NO contact
It is recommended to use monostable (momentary) buttons. When using bistable
buttons, at most one pushbutton can be connected to the input.
Single Switch controller is not adapted to work with backlit buttons.
First launch
After connecting the device to the power supply, it is recommended to
personalize the device. Personalization is the process of assigning passwords
to access the device and
setting up a connection to the home Wi-Fi network and (optionally) remote
access to the device via the F&F cloud.
Do not leave the device switched on without performing the personalization. There is a risk that another user of the Fox application will gain access to your device. If you lose access to your Fox device, follow the procedure described in Restore factory settings section.
For a detailed description of how to use the Fox application, see the context- sensitive help for the application (available under the „i” key in the mobile application) or go to www.fif.com.pl/fox/singleswitch.
- Start the Fox application.
- Open the program menu ( symbol in the upper left corner of the screen) and select the Start command.
- In the system selection window, press the wireless system icon and follow the directions in the following screens:
– Remote access
Remote access configuration is necessary when you need to be able to access
and control your Fox devices from outside your home when your phone app and
Fox modu- les are not connected to the same local network. If you do not have
a remote access account, create one by pressing Create Account button and
following the instructions displayed by the application. If you are adding an
existing account to the application, you need to enter its parameters into
the application: email address used to
create an account in the cloud and a password to access the cloud and add more
devices. In the first field (Name), enter the name under which the account
will be displayed in the application. After entering the data, press the Add
button.
Adding an account is a one-time action. The created account is visible in the
list at the bottom of the screen and can be used to personalize subsequent
devices. In this case, you can skip the Remote Access screen by pressing the
Next button.
Remote access can be set independently for each device in a further
customization step. Lack of remote access does not block the functionality of
the device, it can still be accessed within the local Wi-Fi network.
– Password manager
Each Fox device allows you to enter two passwords: an administrator who has
full configuration and device con- trol rights, and a user who can control
devices but without access to configuration settings. First, add passwords to
the password manager. One or two predefined passwords are then substituted for
the personalized controllers. To add a new password to the password manager,
you must:
› In the Enter name field enter a description of the password under which it
will be visible on the device manager list (such as Home administrator, living
room user),
› In the Enter password field, enter the content of the password,
› Press the Add button.
The password is the key to access the device. Devices can be grouped using the
same passwords, and permissions to these groups can be delegated in the form
of an assigned access password. Thisway, by deciding which passwords go to
which users, you can freely manage access to devices.
For more information on the role of passwords and their use in user
management, go to: www.fif.com.pl/fox.
To remove user rights to a selected device, change the access passwords on it.
Deleting a password from the Password Manager will lose access to all devices
using the deleted password.
– Calendar manager
Allows you to add links to online calendars that can be used to program the
operating cycle of Fox controllers. More information can be found at:
www.fif.com.pl/fox.
– Search
Based on the previously entered information (remote access and password list),
the application will start searching for devices.
Before you start searching, you need to enable the Bluetooth function on your
phone and agree to access thelocation. This will allow you to directly search
for nearby Fox devices.
The app searches for:
› available devices nearby that are in factory mode;
› devices available on your local network or connected to cloud accounts for
which passwords were previously entered into Password Manager.
The gray icon and gray device description indicate devices detected nearby via a Bluetooth connection. To add such a device click on the Bluetooth icon on the right side of the description and wait for the connection to be established. Once the connection is established, the icon and description turn white.
Pressing the “+” button adds device support to the application. For
controllers in factory mode, the customization mechanism for the selected
module is started here and the instructions in the Device Configuration
window must be followed:
› Enter the name under which the device will be displayed;
› From the drop-down list of passwords, select the password for the
administrator and user;
› Set the parameters of the Wi-Fi network (network name and password) to which
the device will connect;
Fox controllers can only connect to Wi-Fi networks operating in the 2.4 GHz band.
› Set other configuration parameters as necessary: user password, remote
access account, link to the programmers calendar, and the time zone and
location of the device necessary for proper operation of the programmers;
› After entering all the data, press the OK button and wait for the
configuration to be sent to the device. The application will continuously
display messages about the progress of saving the configuration and inform
about possible errors;
› When the configuration is saved correctly, the device disappears from the
list of retrieved devices and is mo- ved to the list of devices visible in the
application.
If you personalize more devices, you can use the Set Defaults option at the top of the Device Configuration screen. Pressing this button will substitute all recently entered data (passwords, Wi-Fi settings, remote access, calendar, location and time zone) into the new device.
LED signalling
The status of the module can be directly assessed by the STATUS light located
on the front of the device.
The grey color actually corresponds to the green LED and the black color to
the red LED.
| Controller in factory mode
---|---
| Connecting to a Wi-Fi network
| Connection to Wi-Fi network established
| No connection to Wi-Fi network
| Restoring firmware
Restore factory settings
In case of lack of access to the controller, for example due to lost
passwords, it is recommended that you reset the access passwords and then
reconnect and configure the controller using the Fox application.
To reset passwords:
- While the controller is operating, press and hold the PROG button on the front of the controller. When the button is pressed, the green LED will start to flash rapidly.
- After about 5 seconds, the LED will turn off and you should release the PROG button.
- Press the PROG button briefly, the green LED will light up again.
- Press and hold down the PROG button. After about 3 seconds, the previously switched on green LED control light will start to flash. After another 3 seconds, it will go out and the red LED light up.
- Release the button – after a few seconds the indicator LED will turn green and the controller will restart.
- After completing this procedure, the access passwords and parameters for remote access have been cleared. You can now search for your device again in the app and personalize it again.
Technical data
power supply
control input
control voltage
control pulse current
maximum load current (AC-1)
rated power
maximum current (instantaneous)
power consumption
standby
operation (relay on)
communication
radio frequency
transmission radio power (IEEE 802.11n)
receiver sensitivity terminal
tightening torque
working temperature
humidity
dimensions
mounting
ingress protection| 85÷265 V AC
85÷265 V AC
<1 mA
180 W
300 W
<1.2 W
<1.6 W
2.4 GHz
Wi-Fi
<13 dBm
-98 dBm
2.5 mm² screw terminals
0.4 Nm
0÷45°C
<90%
(no condensation of steam and aggressive gases)
ø54 (size 48×43 mm), h= 20 mm
in ø60 flush-mounted box
IP20
---|---
Warranty
F&F products are covered by a 24-month warranty from the date of purchase. The warranty is only valid with proof of purchase. Contact your dealer or contact us directly.
CE declaration
F&F Filipowski sp. j. declares that the device is in conformity with the
essential requirements of Directive 2014/53/EU of the European Parliament and
of the Council of 16 April 2014 on the harmonisation of the laws of the
Member States relating to the making available on the market of radio
equipment and repealing Directive 1999/5/EC.
The CE Declaration of Conformity, along with the references to the standards
in relation to which conformity is declared, can be found on
www.fif.com.pl on the product page.
References
- Fox - system zdalnego sterowania przez Wi-Fi
- Fox Single Switch - do zdalnego sterowania przez Wi-Fi oświetleniem oraz dowolnymi urządzeniami elektrycznymi w domu.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>