litter-robot LR3 Waste Drawer Liner Installation Guide
- June 9, 2024
- Litter-Robot
Table of Contents
litter-robot LR3 Waste Drawer Liner Installation
Installing the Litter-Robot 3 Waste Drawer Liner
How to install
Open a new waste drawer liner and roll down the edges four times.
Start at the back of the waste drawer and push the rolled edge of the bag into each of the four tabs, making sure the bag is taut across the back and sides. Pull the slack forward toward the carbon filter.
Make sure the bag does not come up past the top of the sides of the waste
drawer, which can result in a false flashing blue “drawer full” light on the
control panel.
Slide the drawer closed and press the Reset button to zero the cat sensor
.
Questions? Visit whiskersupport.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>