FSP CST350 Plus PC Case User Guide
- June 2, 2024
- FSP
Table of Contents
CST350 Plus PC Case
User Guide
CST350 Plus PC Case
1. Front Panel
4. Left HDD / Fan Bracket
7.ATX PSU Bracket| 2 Bottom Plate
5. Side Cover
8. Top Cover| 3. HDD / Fan Bracket
6. Micro-PSU Bracket
---|---|---
Specification
Model | CST350 Plus |
---|---|
Type | Micro ATX |
Color | Black |
Materials | 0.8mm SPCC |
Weight | NW: 5.2kg |
Dimensions (D x W x H) | 391x185x303mm |
MotherBoard Support | Micro ATX or Mini-ITX |
External I/O port | USB3.0 x 2. USB Type-C, HD Audio |
Maximum CPU Cooler Height | Vertical VGA: 88mm |
Without vertical VGA and fan bracket: 155mm
VGA Card Length| Vertical VGA w i t h ATA PSU: 245mm
Vertical VGA with SFX PSU: 320mm
Horizontal VGA with ATX PSU: 320mm
Expansion Slots| 4
Dust Filters| Top/Side/Bottom
Power Supply Type| ATX or SFX-L
Drive Bay| 3.5″ HDD| 3
2.5″ SSD| 3
Fan&Water Cooler Support| Top| 120mm x 2 . 120mm x 1 with ATX PSU
Side| 120mm x 2 or 240mm Radiator(ITX+Horizontal VGA)
Bottom| 120mm x 2 or 240mm Radiator(ITX+Vertical VGA)
Rear| 80mm x 1(without Vertical VGA)
Fan & Radiator| Preinstall Fan| Top: 12cmx1; Rear: 8cmx1
Max Radiator Support| 240mm(Only ITX motherboard)
Accessory
Side Panel Disassembly
Remove screws on rear plate, then open to pand bottom plate| Unscrew to
remove HDD/Fan bracket and the side bracket
---|---
MATA Installation Plan – MB Installation
MATA Installation Plan – ATX PSU Installation
MATA Installation Plan – Installation of SFX PSU
Putin gaskets be fore fixing
HDD/SODD with step screws
(Fix SSD with 2.5″ SSD screws)
(Fix HOD with 3.5″ HDD screws)
|
---|---
ITX Installation Plan – MB Installation
ITX Mother Board Installation Plan – ATX PSU Installation
ITX Installation Plan – Installation of Micro PSU®
Put in gaskets before fixing
HDD/SDD with step screws
(Fix SSD with 2.5″ SSD screws)
( Fix HDD with 3.5″ HDD screws)
|
---|---
ITX Installation Plan – Installation of Micro PSU @
Max. CPU Cooler Height
Installation of Graphic Card
Length Limitation of Vertical GPU Installation
ITX Motherboard Installation
Plan – Max GPU Length
With Micro PSU, 335mm
(When Micro PSU fixed t o MB Tray)
Installation of Vertical GPU
Installation of HDD on HDD / Fan Bracket
|
---|---
Get SSD/HDD and the bracket ready| Put the SSD/HDD to the bracket on the side
with lifted edge
|
Fix with screws (HDD screws for HDD) (MB screws for SSD)| Fix it back t o the
top/bottom of chassis (Only support HDD*1 on top when with ATX PSU)
Installation of HDD / SSD on left fan Bracket
|
---|---
Get SSD/HDD and the bracket ready| Put the SSD/HDD to the bracket on the side
with lifted edge
|
Fix with screws (HDD screws for HDD) (MB screws for SSD)| Fix it back to the
side of chassis (Only support HDD*1 on top when with ATX PSU)
Installation of Double SDD inside of Front Plate
Installation of Water Cooler on HDD / Fan Bracket (Supports only at the bottom
|
---|---
Fix 240/120 water cooler t o the bracket as shown on the picture| Fix bracket
back i n t o the bottom of chassis (Only supports water cooler installation on
the bottom plate with vertical GPU and ITX mother board}
Installation of Rear Plate Fans
Installation of Fans on HDD / Fan Bracket (Top)
(Supports 2s:12cm fan with Micro PSU, Support 1’12cm fan with ATX PSU)
Installation of fans on HDD / Fan Bracket (Bottom)
|
---|---
Fix 12cm fans t o the bracket (Air inflow from the bottom)| Fix the bracket
back into the chassis
Installation of Fans on HDD / Fan Bracket (Left Side)
(Supports 1°12cm fans when using ATX PSU; doesn’t support HOD when fans are
installed)
|
---|---
Fix 12cm fans to the bracket ( Air inflow from the left side)| Fix the bracket
back into the chassis