FSP CMT580 PC Case Instruction Manual
- October 30, 2023
- FSP
Table of Contents
FSP CMT580 PC Case
Product Information
The CMT580 is a mid-tower PC case that supports E-ATX, ATX, Micro ATX, and Mini-ITX motherboards. It has an ultra-simplified and beauty exterior design and comes in black color. The case is made of 0.8mm SPCC material and weighs 7.9KG. The dimensions of the case are 450x220x408mm. The case is optimized for cooling with support for up to six fans and 2 x 360mm radiators. It also has a lighting transmission I/O port with a built-in USB 3.2 Gen 2 Type-C for faster data transfer. The case has an easy cable management design with built-in multiple holes for cables and exclusive space for hard drives. The CMT580 has a tools-free panel design that allows for easy panel changes in just 5 seconds. The left and right side panels can easily be exchanged at any time. It also has a maximum CPU cooler height of 160mm and a VGA card length of 335mm. The case has seven expansion slots and supports bottom and back fan & water cooler support.
Product Usage Instructions
- To install the motherboard, remove the left side panel by removing the top screw and pulling the panel up.
- Install the motherboard onto the standoffs inside the case, aligning the I/O shield with the corresponding opening in the case.
- Connect the power supply to the motherboard and install any additional components such as CPU, RAM, and graphics card.
- Install the storage drives into the drive bays located at the bottom of the case. The case supports both 3.5″ HDD and 2.5″ SSD drives.
- Install the pre-installed fans onto the case, with one fan located at the bottom back and three fans located at the top. The case also supports additional fans or a water cooler on the bottom and back.
- Connect the external I/O ports, including two USB 3.0 ports, one USB Type-C port, and an HD Audio port.
- Replace the side panel and secure it with the top screw.
- Power on the system and enjoy your new PC build!
Introduction
CMT580 is E-ATX mid tower with ultra simplified and beauty exterior design. It comes with pre-installed 120mm x 4 fans and lighting transmission I/O port which is built in USB 3.2 Gen 2 Type C. Also with easy cable management design could support both vertical and horizontal installation. With high flexibility to system upgrade, CMT580 is definitely an ideal choice for you.
Features
Optimized for Cooling
With support for 2 x 360mm radiator and up to six fans.
Tools free panel design
Easy changed panels in just 5 seconds
USB Type-C Design
One USB Type-C and two USB3.0 for faster data transfer
- Support E-ATX, ATX, Micro ATX, Mini-ITX motherboard
- Support VGA Height 335mm
- Pre-installed 120mm x 4 fans
- Lighting speed Type-C Gen2
- Easy cable management design
Product Overview
Ultra simplified & beauty
Beauty without reducing heat dissipation
Lighting transmission I/O port
Built in USB 3.2 Gen 2 Type – C
More space to upgrade at anytime
Support E-ATX, ATX, Micro ATX, Mini-ITX motherboard
Easy cable management design
Built-in multiple holes for cable
Exclusive space for hard drives
Tools free panel design
-
Easy changed panels in just 5 seconds.
-
Remove the top screw, pull up to disassemble panels
-
The left and right side panels
-
can easily be exchanged at anytime.
Pre-installed 120mm x 4 cooling fans
- Quieter but powerful
- Support maximum 360mm radiator
Specifications
© 2023 FSP Group. All Rights Reserved. All trademarks are registered to their respective owners.
Documents / Resources
| FSP
CMT580 PC
Case
[pdf] Instruction Manual
CMT580 PC Case, CMT580, PC Case, Case
---|---