SoundPEATS True Free Plus Wireless Earbuds User Manual
- June 2, 2024
- SoundPEATS
Table of Contents
Life
WIRELESS EARBUDS
User Guide
First Start & Re-Pairing
-
Please make sure the charging case have remaining power. Open the charging case lid, both earbuds will automatically enter TWS pairing mode.
After successfully pairing with each other, the indicator on main earphone will flash in red and white, the indicator of second earphone will stay white, then the earphones will enter pairing mode. -
Find and click“ SOUND PEATS Life”in the Bluetooth list of your device to connect. The indicators of both earphones will stay on after successfully connected.
-
SOUNDPEATS Life Bluetooth earphones can remember previously paired devices. When you make the second connection, simply activate the Bluetooth in your device and take out both earbuds from the charging case at the same time, these earphones will automatically connect to each other and pair with your device. If the earphones can’t pair with your device automatically , please activate the Bluetooth in your device and choose “SOUNDPEATS Life” to connect.
Reset
Please try to reset the earphones according to following steps if the earphones fail to build connection or re-pair with your devices.
- Clean pairing record of the earphones in all your devices.
- Place back both earphones into the charging case and make sure they are in charging status. The indicator of the charging case will flash once when the earphones are successfully put in.
- Keep the charging case lid open, press and hold the button of the charging case for 10s until the white light flashes twice, reset complete.
- Close the lid and open it again to activate the earphones.
Wearing
- Identify the left and right earbuds according to the “L” and “R” logos on each side of the earphones.
- Rotate earphones and find the most comfortable position.
Product Diagram
Touch Control
Power On| Auto: Open up the case Id
Manually: Press and hold the MFB for 1.5s
---|---
Power Off| Auto: Place earphones back into the charging case and close the lid
Manually: Press and hold the MFB for lOs
Play / Pause| Double tcp the MFB
Volume –| Single tap the left MFB
Volume +| Single tap the right MFB
Next Track| Press and hold the right MFB for 1.5s
Answer / Hang Up Phone Call| Double tap the MFB
Reject Phone Call| Press and hold the MFB for 1.5s
Switch Between Two at| Press and hold the MFB for 1.5s
Manudly Enter Pcitig Mode| Press and hold the MFB of the charghg case for 3s
Activate Voice Assistant| Triple tap the right MFB
Enter / Exit Gcrne Mode| Triple tap the left MFB
ANC / Transparency / Normd Mode| Long press the left MFB for 1.5s
Q&A
Q1: What does the indicator light of the charging case mean?
1. It shows the power of charging case while:
100%—50% – Green
49%—10% – Yellow
10%-0% – Red
2. When charging the case, the indicator light shows:
0%-20% – red light breathing slowly
21%-69% – yellow light breathing slowly
70%-99% – green light breathing slowly
100% – green light on
3. Open the charging case lid,every time you place back or take out the
earphones, the indicator of the charging case will flash once and stay on for
10s(the indicator light will change according to the remaining power of the
charging case).
Q2: How to charge the earphones and the charging case?
1. When the earphone is in low power state, a low power prompt will be
broadcast. You can place back the earphones into the charging case to charge
them.
2. Please use a Type-C adapter to charge the case (current no more than 1A).
3. Please charge the earbuds and charging case at least once per 3 months
when not in use for a long time.
Q3: Why are the earphones still connected to my phone after placing them back and closing the case lid?
1. The charging case has no remaining power. The case can’t turn off the
earbuds if the case battery is dead.
2. Please make sure the earbuds are correctly placed in the charging case,
and make sure the charging contactors and PIN pins are clean. Please try to
clean where the charging case and the earphones are in contact with microfiber
cloth.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
IC ID
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- this device may not cause interference, and
- this device must accept any interference, including interference thatmay cause undesired operation of the device.”
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
MANUFACTURER
Shenzhen SoundSOUL Information Technology Company Limited
Room 1308-1309, Building B, Huihai Square, Chuangye Road, Longhua District,
Shenzhen, China. 518109
support@soundpeats.com
www.soundpeats.com
Company ：Qing UG(haftungsbeschränkt)
Address ：Undinestr. 7, 12203 Berlin Germany
TANMET INT’L BUSINESS LTD
9 Pantygraigwen Road, Pontypridd, Mid Glamorgan, CF37 2RR,UK
tanmetbiz@outlook.com
FCC ID: 2AFTU-DD031 IC ID: 27785-YK003
MADE IN CHINA
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>