THON XL 10U Studio Side Rack Black Instruction Manual

THON XL 10U Studio Side Rack Black

Product Information

The Thon Studio Side Rack XL 10U Studio Rack is a sturdy and versatile rack designed for professional studio setups. It provides ample space for storing and organizing audio equipment, musical instruments, and other studio essentials. The rack features a durable construction with high-quality materials to ensure long-lasting performance.

Key Features:

• 10U rack space for accommodating various studio equipment
• Includes left and right side panels, base panel, cover panel, and front panel
• Connector bolts and housings for secure assembly
• Wooden dowels and screws for rack rail installation
• Furniture casters for easy mobility

Product Usage Instructions

Safety Instructions:

• Ensure that plastic bags, packaging, etc. are properly disposed of and are not within the reach of babies and young children to avoid choking hazards.
• Keep small parts, such as knobs, away from children to prevent them from swallowing and choking on them.
• Never let children play unattended with the product.
• When assembling and screwing the individual parts, be cautious of sharp edges on tools, screws, and components to avoid injury to the hands.

Installation:

1. Before assembling the rack, ensure that all the components listed in the scope of delivery are present.
2. Place all components on a suitable mounting surface with soft padding to prevent surface damage.
3. Refer to the provided overview figure to familiarize yourself with the individual components.
4. Prepare the components by inserting the connector housings, connecting bolts, and wooden pegs into the designated holes as shown in the figure.
5. Position the connector housings so that the connecting bolts can be completely sunk into the holes and ensure that the arrow position of the connector housings points towards the hole.
6. Assemble the components by placing the base panel, cover panel, and front panel onto the connecting bolts of the left side panel. Tighten the connector housings clockwise to secure the connection.
7. Place the right side panel onto the pre-assembled unit and tighten the connector housings clockwise to lock the connection.
8. Check all connections for a tight fit.
9. Set the fully assembled unit onto the rack rail front and screw the four casters into the holes provided in the base panel using raised countersunk screws.

By following these instructions, you can assemble and use the Thon Studio Side Rack XL 10U Studio Rack effectively and safely in your studio setup.

Safety instructions

DANGER!

• Danger for children
• Ensure that plastic bags, packaging, etc. are properly disposed of and are not in the reach of babies and young children. Choking hazard!
• Ensure that children do not detach any small parts (e.g. knobs or the like) from the product. They could swallow the pieces and choke!
• Never let children play unattended with the product.

CAUTION!
Risk of injury to the hands
When assembling and screwing the individual parts, pay attention to sharp edges on tools, screws and components.

Scope of delivery

Before you assemble your rack, make sure the contents of package is complete according to the following list.

• 2 × side panel, melamine-coated 19 mm furniture board
• 1 × floor panel, melamine-coated 19 mm furniture board
• 1 × cover panel, melamine-coated 19 mm furniture board
• 1 × front panel, melamine-coated 19 mm furniture board
• 2 × rack rails, 3 U, stepless, equipped with nuts and rubber piping
• 2 × rack rails, 10 U, stepless, equipped with nuts and rubber piping
• 2 × rack rails, 13 U, stepless, equipped with nuts and rubber piping
• 32 × woodscrew for rack rail
• 16 × connector housing
• 16 × connector bolts
• 8 × wooden dowel
• 4 × braking furniture caster
• 16 × raised countersunk screw 4,8×16
• 1 × assembly instruction
• 1 × installation template for rack rail

Installation

Place all components on a suitable mounting surface for mounting. Use a soft padding to prevent damages to the surfaces.

Overview
The following figure shows an overview of the individual components.

Preparing the components

• Insert the connector housings, the connecting bolts and the wooden pegs into the holes provided in the components, as shown in the figure below.
• Position all connector housings so that the respective connecting bolts can be completely sunk into the holes and the arrow position of the connector housings points towards the hole.
• After insertion, the connecting bolts sit loosely in the drill holes and only spread apart when the connector housings on the associated component are tightened.
  1| Left side panel| 5| Front panel
  ---|---|---|---
  2| Right side panel| A| Connector bolt
  3| Base panel| B| Connector housing
  4| Cover panel| C| Wooden dowel

Assembling the components

• Place the base panel, the cover plate and the front panel onto the connecting bolts of the left side panel. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts.
• Place the right side panel onto the pre-assembled unit consisting of the base panel, cover panel and front panel. Tighten the connector housings clockwise to lock the connection with the inserted connecting bolts. Check all connections for a tight fit.
  1| Left side panel| 4| Cover panel
  ---|---|---|---
  2| Right side panel| 5| Front panel
  3| Base panel|  |
• Set the fully assembled unit onto the rack rail front. Screw the four casters into the holes provided in the base panel , each with four raised countersunk screw.
  E| Raised countersunk screw 4,8×16| F| Furniture caster
  ---|---|---|---
• Set up the rack. Use the wood screws provided to screw the rack rails to the inside of the rack parallel to the front and rear edges. We recommend a distance of approx. 1.5 cm from the front edge. A mounting template is included for easy installation.
  D| Woodscrew for rack rail| H| Rack rail 10 U
  ---|---|---|---
  G| Rack rail 3 U| I| Rack rail 13 U

Technical specifications

Protecting the environment

• Disposal of the packaging material
• For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling.
• Ensure that plastic bags, packaging, etc. are properly disposed of.
• Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging

Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany
Telephone : +49 (0) 9546 9223-0 Internet: www.thomann.de
21.07.2022, ID: 547938, 547939, 547941, 547944, 547946

References

• Buy musical instruments online from the market leader – Thomann United States

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>