TREKURE Beta01 Jump Starter and Air Compressor User Manual
- July 20, 2024
- TREKURE
Table of Contents
TREKURE Beta01 Jump Starter and Air Compressor
Packing list
KNOW YOUR Beta01
Thanks for choosing TREKURE Beta01 jump starter! Please read all instructions carefully before using this product and keep these instructions for easy reference.
SPECIFICATIONS
OPERATION GUIDE
Before use, please note:
- Charger not included. A universal USB charger is fine, such as your phone charger (2A above is suggested)
- When using the product for the first time, please make sure it is fully charged.
- It is recommended to charge up the product every 3 months to prolong its lifespan even if the unit has not been used.
Recharge The Product
Step 1. Connect the product to power supply via the charge cable.
Step 2. Disconnect the power after it is fully charged.
Charge Other USB Devices
Step 1. Connect the product to your iPhone, smart phone or other USB
electronic devices via the charge cable.
Step 2. Press the power button to start charging. Disconnect when
charging is not required.
LED Emergency Light
Long press the LED Button for 3 seconds, the white flashlight will be on.
Short press to switch to Strobe and SOS mode in turn. Then press again to turn
it off.
Start Vehicles
Before use, please note
- This product is only suitable for 12 V vehicles
- Before starting your car, it’s best to make sure the product has enough power.
Step 1. Insert the clamp plug completely into the product. The red and
green indicators will flash alternately.
Step 2. Connect the red clamp to the positive terminal (+) of your
vehicle battery and the black clamp to negative one (-). The green indicators
will be solid.
Step 3. Start your car. If the engine is not successfully started on the
first try, disconnect it from the car battery, and wait for at least 30
seconds to try again.
Step 4. When the vehicle is started, remove the jumper cable from your
car battery within 30 seconds.
Inflate Tires
Step 1. Connect the air hose firmly to the product and tire air valve
respectively, and press down the handle to fix the air hose.
Step 2. Short press the power button to activate the product, then press
the pump button to switch to pumping mode (2.5Bar default). You can press the
unit button to switch pressure unit between BAR, Kpa and PSI, and press the
“+” and “-” button to adjust pressure values.
Step 3. After the setting is completed, press the power button to start
pumping, and the real-time tire air compressor will be displayed. 02.5
Step 4. The product will automatically shut off when it has reached the
pre-set pressure value.
Tip : If using for long period, It’s recommended to stop in every 10 minutes to cool down it. Otherwise the protection program will be started automatically.
INDICATOR AND TROUBLESHOOTING
In any of the following situations, the smart clamp will turn protections on:
IMPORTANT SAFETY WARNING
ATTENTION : Please read the following safety warning before using the product and take safety protection measures to avoid malfunctions caused by accidental operation.
Personal Safety
- Store in a cool and well-ventilated place out reach of children and pets. 2. Do not place the product in high temperature environment for a long time. The operation temperature of this product is -20~60°C. The storage temperature should not exceed 50°C /122 °F . Electrical Safety 1. Only start vehicles with the smart jumper cable supplied by the manufacturer.
- Do not use the product if the clamp or cable is damaged.
- Do not connect the red and black clamps together when the product is outputting.
- Do not connect the red and black clamps to the same piece of metal.
- Do not disassemble or modify this product.
- Do not use detergent to clean this product.
- Do not abuse this product and avoid heavy dropping or repeatedly hitting it.
- Do not operate the product in explosive environments such as flammable liquids, gases or dusts.
- Do not immerse the product in water.
Battery Safety
- Do not litter the product and it should be safely recycled.
- Do not incinerate the product or exposed to high temperatures, as they may explode.
- Only use replacement parts or accessories provided or recommended by manufacturer.
WARRANTY
Our company provides customers with warranty of 24 months from the date of
purchase.
For assistance or warranty cover claim, please contact us: E-mail:
support@trekure.com
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return
your used device, please use the return and collection systems or contact the
retailer where the product was purchased. They can take this product for
environmental safe recycling.
Federal Communication Commission Interference Statement
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution : Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that maycause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>