FUFU GAGA LJY-KF210119-01 Gray Composite Shoe Cabinet Instruction Manual
- June 2, 2024
- FUFU GAGA
Table of Contents
FUFU GAGA LJY-KF210119-01 Gray Composite Shoe Cabinet
IMPORTANT INFORMATION!
please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re-tightened
2 weeks after assembly,and once every 3 months – in order to assure stability
through-out the lifespan of the product.
For regular maintenance and cleaning of the product, for the frame, please use
a rag dipped in neutral detergent to fully wipe it, and then dry it with a
clean rag.For glass materials, wipe with a rag dampened with water glass
cleaner, and then dry with a dry rag.
Do not use an electric screwdriver, and do not use too much force when
installing, because the board is easy to break.
Please prepare the following tools
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
OVERVIEW
INSTALLTION
-
Tighten Cam Bolt (A) to panel 2 panel 3 and panel 1 , as shown.
-
Please hammer the G-1 and G-2 onto the 2 and 3 boards ,as shown.
-
Please turn No. 2 board and No. 3 board behind, INSERT SAWDUST C into No. 4 board, No. 5 board , No. 6 board and No. 7 board respectively, then Lock with Cam Lock B with No. 2 board and No. 3 board respectively,as shown.
-
Wood pins (C) are inserted in the upper parts of Plate 2 and Plate 3;Insert number 8 and number 9 back plate into the back plate slot of number 2 left side plate and 3 right side plate,as shown.
-
Lock Panel 1 with Panel 2 and Panel 3 Panel 4 with Cam Lock;Wood pins (C) are inserted in the upper parts of Plate 4,as shown.
-
Please use screw (J) to lock back plate
No. 8, No. 9 and No. 5 respectively . Please hammer the nail (D) under the No. 2, No. 3 and No. 7 boards,as shown. -
Please fasten the E-1, E-2 and No. 12 plates with screws (H) respectively,as shown.
-
Please fasten the E-1, E-2 and No. 14 plates with screws (H) respectively,as shown.
-
Please fasten the E-1, E-2 and No. 13 plates with screws (H) respectively,as shown.
-
Please use screw (L) to lock the handle (K) with plate No. 12,as shown.
-
(1) Please fasten the E-1, E-2 and No. 11 plates with screws (H) respectively,as shown.
-
Please fasten the E-1, E-2 and No. 14 plates with screws (H) respectively,as shown.
-
Please fasten the E-1, E-2 and No. 13 plates with screws (H) respectively,as shown.
-
Please use screw (L) to lock the handle (K) with plate No. 11,as shown.
-
Please use screw (I) to lock (G-3) through plate E-1 and No. 2 and plate E-2 and No. 2 respectively,as shown.
Note:Please note that the front panel of drawer No. 11 is different from No. 12! Plate 12 drawer down, plate 11 drawer in the middle,as shown. -
Please insert panel 13 into the cabinet ,as shown.
-
Please use screw H to lock the E-1 and E-2 with plate 13 respectively,as shown.
-
Please users according to the actual needs,to choose a Option Anti-pour, choose one of the options to install,as shown. or Option
-
Option1
Please use a pen to locate the pour-proof position on the wall, guide the hole position with an impact rotation, then use a hammer to knock (F-1) against the wall, and use screws (F-2) to pass through plate 4 and Plate 8 to lock with the wall,as shown. -
Option2
Please use the screw (M-2) to pass through the cloth strip (M-1) and lock it with Plate 2 and Plate 3 respectively,as shown. -
Option1
Please use screw (I) to lock (G-3) through plate E-1 and No. 2 and plate E-2 and No. 2 respectively, as shown. -
Option2
Please use screw (I) to lock (G-3) through plate E-1 and No. 2 and plate E-2 and No. 2 respectively, as shown. -
Option Ⅰ
Please insert panel 13 into the cabinet,as shown. -
Option Ⅱ
Please insert panel 13 into the cabinet,as shown. -
Option Ⅰ
Please use screw H to lock the E-1 and E-2 with plate 13 respectively, as shown. -
Option Ⅱ
Please use screw H to lock the E-1 and E-2 with plate 13 respectively, as shown. -
Option1
-
Option 2
Please use the pen to locate the anti-toppling position on the wall, use the impact rotation guide hole position, then use the hammer
to hit (F-1) the wall, use the screw (F-2) to pass through the cloth to lock with the wall!as shown.
WARRANTY
- WARRANTY CLAIMS
- There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase.
- Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
- The product must be used in accordance with the instructions provided. For health reasons.
- For other reasons, if the furniture needs to be returned, it must be cleaned and dried and operated within 30 days of receipt.
- Type of Warranty Claim
- Failure to follow the furniture instructions will invalidate the warranty. Attention please.
- Does not include damage during installation, but includes damage during transportation.
- Scope of responsibility
- Shall not bear any responsibility for misuse or user damage and / or loss of parts during the installation of furniture.
- After using, the damage and scratches of the furniture are not covered by the warranty.
- The Warranty Relates to All Bought in The Us and Covers The Following Areas
- Sheet parts: 1 month from the date of purchase.
- Electrical parts: 1 month from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
-
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. -
DEFECTIVE ITEMS
If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. -
DAMAGED ITEMS
If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused. If the delivery has been accepted and then shipping damage is found, please follow the specific instructions advised by the retailer. In all circumstances please save all packaging material and paperwork for the order. Please be aware that if you dispose of packaging material or attempt to return the merchandise without contacting the fulfiller, you jeopardise your chances of making a claim, and you may not receive a credit for the return.