Bird AI Bird-Hub All-In-One AI Video Conferencing and Wireless Content Collaboration Solution Installation Guide
- June 6, 2024
- Bird AI
Table of Contents
Bird Hub
Getting Started
Components for Setup
In the box
- Bird Hub
- USB Type C Cable
- Power Cable
- Power Adapter
- Stylus with Charging Cable
- Remote with USB Dongle
- HDMI Cable
- L Type HDMI Connector
Not in the box
- Measuring Tape
- Marker
- Display Panel
- Computer
Installation
Basic Guidelines
Take care not to place the panel in direct sunlight. . For seamless experience
the display panel has to be mounted firmly. If needed, add some extra padding
(ex: sponge) for support between the panel and the wall to prevent it from
shaking while writing.
Measure and mark the centre and top list of the display. Place the device on
the display and use the clip to fix it safely on the display. Make sure the
device is not leaning forward or falling behind.
Connectivity
Port Description
Connections: Appliance mode
Setting Up
First Boot- up
Note: Touching the board with your Stylus will not work as yet. First, calibrate the sensor. Use the USB remote (provided in the box) or a standard USB mouse or keyboard to do this set up.
If you see red markers touching all the four corners of the
display, it is OK. Refer the images below for more clarity.
Calibration
Setup Wi-Fi & follow Instructions on screen to Register device
Connections: Smart Camera mode
Stylus
Note: Styluses needs to be charged before using for the first time.
To charge Stylus use the Mini USB cable and connect the stylus to PC
Registered Offices
Hannover: Georgstraße 38, 30159, Hannover, Germany, Ph: +49 (0)511 93621 188
Delhi NCR: Plot no. C-98, Sector- 65, NOIDA, 201301, Ph: +91 (0)120 435 9466
Bangalore: 1290, Sector 7, HSR Layout, 560102, India, Ph: +91 (0)888 474 3388
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>