FUFU GAGA KF020246-01 Wood Storage Cabinet Instruction Manual
- October 30, 2023
- FUFU GAGA
Table of Contents
KF020246-01 Wood Storage Cabinet
Display Cabinet
Version: 11/07/2022
IMPORTANT INFORMATION! Please read the entire
manual before starting to assemble and/or using this product.
Follow the manual thoroughly and keep it for further reference.
AVOID SCRATCHES! In order to avoid scratching
this furniture, it should be assembled on a soft layer, which could
be a rug.
IMPROVE EFFICIENCY! Try to find a partner to
install with you, which can speed up the installation efficiency
and shorten the time.
ANTI-TOPPLE WARNING! Overturned furniture can
cause serious or fatal crush injuries. To prevent tipping over, be
sure to use the wall attachment, if not included with this product.
Please purchase the wall attachment that fits your wall. If unsure,
seek professional advice. Please read and follow each step of the
instructions carefully.
IMPORTANT!
- Please prepare the following tools:
- Ax27
- Bx27
- Cx32
- Dx9
- F-1
- F-2
- Kx2
- Lx4
- Nx2
- N-1
- N-2
- Px20
- P-1
- P-2
- Mx2
- M-1
- M-2
- R-2
- R-1
- CLx1
- CL 300mm
- CRx1
- CR 300mm
- DLx1
- DL 300mm
- DRx1
- DR 300mm
Product Usage Instructions:
-
Before starting assembly, read the entire manual carefully and
prepare all the necessary tools. -
To avoid scratches, assemble the furniture on a soft layer,
such as a rug. -
Try to find a partner to install with you to speed up the
installation process. -
To prevent tipping over, use the wall attachment that fits your
wall. If unsure, seek professional advice. -
Follow each step of the instructions carefully.
-
Insert quickfit screw A into corresponding holes in panel
2&3. Do not use an electric screwdriver and do not use force
during the rotation of the accessories, otherwise it may cause the
board to crack. -
Fix panel 4 to panel 2 using wooden dowel C, then turn cam
locks B clockwise to tighten. -
Fix panel 4 to panel 3 using wooden dowel C, then turn cam
locks B clockwise to tighten. -
Fix part K to panel 5 using screw L. Flip the plate and insert
quickfit screw A into corresponding holes with a screwdriver. -
Attach panel 5 to the assembled component D using wooden dowel
C and screw D. -
Fix runner CL&CR to panel 6&7 using screw E.
-
Insert quickfit screw A into corresponding holes in panel 6 and
7 with a screwdriver. -
Attach panel 8, 4, 10 to panel 6, then turn cam locks B
clockwise to tighten. -
Slide panel 12 into available slots.
Display Cabinet
Version:11/07/2022
1/22
IMPORTANT INFORMATION! please read the entire manual before starting to
assemble and/or using this product.follow the manual thoroughly and keep it
for further reference.
AVOID SCRATCHES! In order to avoid scratching this furnuture should be
assembled on a soft layer-could be a rug.
IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can
speed up the installation efficiency and shorten the time.
ANTI-TOPPLE WARNING !
Overturned furniture can cause serious or fatal crush injuries. To prevent
tipping over, be sure to use the wall attachment, if not included with this
product. Please purchase the wall attachment that fit your wall. If unsure,
seek professional advice. Please read and follow each step of the instructions
carefully.
IMPORTANT !
It is important that any product which is assembled using any kind of screw is
re-tightened 2 weeks after assembly,and once every 3 months – in order to
assure stability through-out the lifespan of the product. For regular
maintenance and cleaning of the product, for the frame, please use a rag
dipped in neutral detergent to fully wipe it, and then dry it with a clean
rag.For glass materials, wipe with a rag dampened with water glass cleaner,
and then dry with a dry rag. Do not use an electric screwdriver, and do not
use too much force when installing, because the board is easy to break.
2/22
Please prepare the following tools
Ax27
When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size
Bx27
Cx32
Dx9
Ø6x35mm Ex28
Ø3x12mm Jx4
Ø15x10mm Fx3
F-1
F-2
Kx2
Ø6x30mm Gx6
Lx4
Nx2
N-1
N-2
Px20
P-1
P-2
Ø3x14mm Qx24
Ø3x16mm
Ø3.5x14mm
3/22
Ø4x35mm Hx4
Mx2
M-1
M-2
Ø4x35mm Rx2
R-2 R-1
CLx1
CL
300mm
CRx1
CR
300mm
DLx1
DL
300mm
DRx1
DR
300mm
4/22
13
12 12
16
15 2 15
1
3 14
4 5
87 4
17 17
18 18
6
10
11
20 21
22
19
23
9
5/22
1
Ax4
Ø6x35mm
Insert quickfit screw A to corresponding holes
in panel 2&3. Do not use an electric screwdriver, do not use force during the
rotation of the accessories, otherwise it may cause the board to crack
3
A
A
A 2
A
A
2
Bx2
Cx2
Ø15x10mm
Ø6x30mm
Please pay attention to the holes where the accessories are inserted
Fix panel 4 to panel 2 using wooden dowel C, then turn cam locks B clockwise to tighten, as shown.
I
II
III
4
C
B
C
2
B
C
180°
B
6/22
3
Bx2
Cx2
Ø15x10mm
Ø6x30mm
Fix panel 4 to panel 3 using wooden dowel C, then turn cam locks B clockwise to tighten, as shown.
I
II
III
2
4
Rx2 R-1
R-2
Ex4
Ø3x12mm
3
C
BC
4
B
C
180°
B
R-2
R
R-1
R-1 R-2
R-2 R-1
R-1
R-2 R-1
E
E
E
R-1
R-1 1
1
7/22
5
Ax4
Ø6x35mm
Insert quickfit screw A to corresponding
holes in panel 1.
Do not use an electric screwdriver, do not use force during the rotation of
the accessories, otherwise it may cause the board to crack
A
A A
1
A
A
6
Bx4
Cx4
Ø15x10mm Ø6x30mm
Attach panel 1 to the assembled component using wooden dowel C, then turn cam locks B clockwise to tighten, as shown.
1
C C
B B
C C
B B
3
4 2
I
II
III
C
180°
B
8/22
7
13 12
12
4
Slide panel 12 into available slots as showm.
2
Please connect two panel 12 with
plank 13 at first.
3 1
8
Ax4
Ø6x35mm
Kx2
Lx4
Ø3x14mm
Fix part K to panel 5 using screw L as shown. Flip the plate, insert quickfit screw A into corresponding holes with a screwdriver as shown.
L L
K
L LL L
K K
5
A A
9/22
A A
5 A
9
Cx4
Dx4
Ø6x30mm
Ø4x35mm
Attach panel 5 to the assembled component D
using wooden dowel C and screw D.
D
D C
D D
CC
5
C C
2
4
3 1
10
Ex6
Ø3x12mm
Fix runner CL&CR to panel 6&7 using screw E, as shown.
E
E
E
CL
E
E E E
CL
E E E
CR
7
6
10/22
11
Ax10
Ø6x35mm
Insert quickfit screw A into corresponding holes in panel 6 and 7 with a screwdriver as shown.
A
A
A
A
A
A
7
A
A
A
6
A
A
12
Cx16
Ø6x30mm
Attach panel 11 to panel 10 with wooden
dowel C.
Insert wooden dowel C into panel,
10,11,4 and 8 as shown.
C
C
C
C
C CC C
C
11
10
C C
C
8
C
C
11/22
C
C
C
4
13
Bx5
Ø15x10mm
Attach panel 8,4,10 to panel 6, then turn cam locks B clockwise to tighten, as shown.
8
B
4
B
10
B
B
6
B
14
Bx5
Ø15x10mm
Attach panel 7 to assembled component, turn cam locks B clockwise to tighten, as shown.
I
11
II
III
180°
B
I
II
III
8 6
B
7
B
4
B
B
10 B 11
12/22
180°
B
Gx6
15
Knock foot peg G into bottom of the unit as shown.
16
7
GG G
11
6
G
10
G
G
G
16 15
15
Slide panel 15 into available slots as shown. Please connect two panel 15 with plank 16 at first.
4
7
6
13/22
17
Bx4
Cx4
Ø15x10mm
Ø6x30mm
Fix 2 assembled components using wooden dowel C, turn cam locks B clockwise to tighten, as shown.
I
II
III
2
CC
CC
B B
B B
6
C B
180°
14/22
Hx4
18
H
H
H
H 14
2
Insert part H into panel 2 and 3. Place panel 14 in as shwon.
H
6
19
2
6
15/22
20
Ax5
Ø6x35mm
Bx5
Dx5
Ø15x10mm Ø4x35mm
Insert quickfit screw A into corresponding holes in panel 9 as shown. Attach panel 19,20 and 22 to panel 9 then. Slide panel 23 into grooves, and turn all cam locks B clockwise to tighten as shown.
AA A
A
A
9
A
20
9
23 19 B B
I
II
III
19 22
B
B
20
9
BB
D
21
D D
19
B
180°
D
D 20
D
16/22
22
Fix panel 21 to the component using screw D as shown.
21
Fx1
F-1
F-2
F-1 F-1
Fix handle F-2 to panel 9 using screw F-1 as shown.
F-2
19
F-1 F-1
F-2
9
22
Ex6
Ø3x12mm
DLx1
DL
300mm
DRx1
300mm
DR
Fix runner DL and DR to panel 19 and
E
20 respectively using screw E as shown.
E DR E
E E DL E
E E
DR
E
20
9
17/22
23
Align rails, slide the drawer. 2
CL DL
9 6
24
Qx8
Fx2
Jx4
F-1
F-2
Ø3.5x14mm
Fix hing J to panel 18 using screw(Q) as shown. Fix handle F-2 using screw F-1 as shown.
Q Q J
F-1
F-1 18
Q Q
J
QQ J
x2
F-2
18/22
25
Ex12
Qx16
Ø3x12mm Ø3.5x14mm
Attach panel 17 to upper side by fixing hinge using screw E as shown.
Attach panel 18 to lower side panels by fixing hinge with screw Q as shown.
E
Ex2
E
Ex2
2
Ex2
17
17
17
J Qx4
6
18
J
Qx4
18
QQ
J QQ
Q Q
J
19/22
26
Px20
P-1
P-2
Ø3x16mm
Nx2
N-1
N-2
Reinforce back panel using part P-1 with screw P-2 as shown. Fix N-1 to back panel using screw N-2 as shown.
N-1
N-2
P
P N-1
P
N-2 P
13 12 P
12
P
3
P
P P
P
P
P P
15
P
15
P
7
16
P
P P
P P
N-1 N-2
P-1
P-1
P-2
x20
20/22
27
Mx2
M-1
M-2
Ø4x35mm
Drill holes on your wall at first, and knock part M-1 into. Install anti- tipping device as shown.
M-2
M-2
M-2
WALL
M-1
21/22
28
If there is misalignment after you install, adjust the screw to the best
condition.
22/22
WARRANTY
WARRANTY CLAIMS
·There is a 30-day warranty for broken furniture or any other problems that do
not work properly. The warranty will start from the date of purchase which
must be verified by proof of purchase.
·Before making a claim, we may be able to answer your query, simply call us.
Please leave your purchase order number, along with some details of the
problem, if you want a replacement part. We will arrange within 48 hours. If
there is out of stock, we will reply with a shipping date.
·The product must be used in accordance with the instructions provided. For
health reasons.
·For other reasons, if the furniture needs to be returned, it must be cleaned
and dried and operated within 30 days of receipt.
Type of Warranty Claim
·Failure to follow the furniture instructions will invalidate the warranty.
Attention please. ·Does not include damage during installation, but includes
damage during transportation.
Scope of responsibility
·Shall not bear any responsibility for misuse or user damage and / or loss of
parts during the installation of furniture.
·After using, the damage and scratches of the furniture are not covered by the
warranty.
The Warranty Relates to All Bought in The Us and Covers The Following Areas
·Sheet parts: 1 month from the date of purchase. ·Electrical parts: 1 month
from the date of purchase.
RETURNS
CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM?
PLEASE FOLLOW THE BELOW INSTRUCTIONS:
·If you have purchased and have simply changed your mind, follow the
retailer’s instructions for returns.
DEFECTIVE ITEMS
·If your item is defective in any way, i.e. it doesn’t work but you can’t
identify why, in the first instance, please call us.
DAMAGED ITEMS
·If you receive an order with obvious shipping damage from the retailer, then
we suggest the delivery is refused. If the delivery has been accepted and then
shipping damage is found, please follow the specific instructions advised by
the retailer. In all circumstances please save all packaging material and
paperwork for the order. Please be aware that if you dispose of packaging
material or attempt to return the merchandise without contacting the
fulfiller, you jeopardise your chances of making a claim, and you may not
receive a credit for the return.