REOLINK RLC-822A 4K Outdoor Security Camera System Operation Instruction
- June 3, 2024
- reolink
Table of Contents
REOLINK RLC-822A 4K Outdoor Security Camera System
WHAT’S IN THE BOX
NOTE: Camera and accessories vary with different camera models that you purchase.
CAMERA INTRODUCTION
Camera Connection Diagram
Before using the camera, please connect your camera as instructed below to finish initial setup.
- Connect the camera to a PoE injector with an Ethernet cable.
- Connect the PoE injector to your router, and then power on the PoE injector.
- You may also connect the camera to a PoE switch or Reolink PoE NVR.
NOTE: The camera should be powered with a 12V DC adapter or a PoE powering device such as PoE injector, PoE switch or Reolink NVR (not included in the package).
SET UP THE CAMERA
Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup.
-
On Smartphone
Scan to download the Reolink App. -
On PC
Download path of the Reolink Client: Go to https://reolink.com > Support App & Client.
NOTE: If you are connecting the camera to a Reolink PoE NVR, please set up the camera via the NVR interface.
MOUNT THE CAMERA
Installation Tips
- Do not face the camera towards any light sources.
- Do not point the camera towards a glass window. Or, it may result
- in poor image performance because of the window glare by infrared LEDs, ambient lights or status lights.
- Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image performance. For better image quality, please make sure that the lighting condition for both the camera and the capture object is the same.
- For better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
- Make sure the power ports are not exposed to water or moisture or blocked by dirt or other elements.
- The camera comes with waterproof design so it can work properly under conditions like rain and snow. However, it doesn’t mean the camera can work underwater.
- Do not install the camera at places where rain and snow may hit the lens directly.
- The camera may work in extreme cold conditions as low as -25°C. Because when it is powered on, the camera will produce heat. You may power on the camera indoors for a few minutes before installing it outdoors.
-
To separate mounting plate from the dome camera, hold and press on the camera top and turn anticlockwise.
-
Drill holes according to the mounting hole template and screw the mounting plate to the mounting holes on the ceiling.
NOTE: Use the drywall anchors included in the package if needed .
-
Mount the camera to the mounting plate and turn the camera clockwise to lock it tightly. If the camera is not locked properly, the camera may fall when you turn it anticlockwise to adjust the surveillance angle. NOTE: Run the cable through the cable notch on the mount base.
-
Once the camera is installed, you may rotate the camera body manually to adjust the camera’s surveillance angle.
TROUBLESHOOTING
Camera Is Not Powering on
If your camera is not powering on, please try the following solutions:
- Make sure your camera is powered on properly. The PoE camera should be powered by a PoE switch/injector, a Reolink NVR or a 12V power adapter.
- If the camera is connected to a PoE device as listed above, connect the camera to another PoE port and see if the camera will power on.
- Try again with another Ethernet cable.
If these won’t work, contact Reolink Support https://support.reolink.com/.
INFRARED LEDS STOP WORKING
If the Infrared LEDs on your camera stop working, please try the following solutions:
- Enable infrared lights on Device Settings page via Reolink App/Client.
- Check if the Day/Night mode is enabled and set up auto infrared lights at night on Live View page via Reolink App/Client.
- Upgrade the firmware of your camera to the latest version.
- Restore the camera to factory settings and check out the infrared light settings again.
If these won’t work, contact Reolink Support https://support.reolink.com/.
FAILED TO UPGRADE FIRMWARE
If you cannot upgrade firmware for the camera, try the following solutions:
- Check out the current camera firmware and see if it is the latest one.
- Make sure that you download the correct firmware from Download Center.
- Make sure that your PC is working on a stable network.
If these won’t work, contact Reolink Support https://support.reolink.com/.
SPECIFICATIONS
Hardware Features
- Night Vision: 30 meters (100ft)
- Day/Night Mode: Auto switchover
General
- Operating Temperature: -10°C to 55°C (14°F to 131°F)
- Operating Humidity: 10%-90%
- Ingress Protection: IP66
For more specifications, visit https://reolink.com/.
NOTIFICATION OF COMPLIANCE
FCC Compliance Statement
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. For more information, visit: https://reolink.com/fcc-compliance-notice/.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Simplified EU Declaration of Conformity
Reolink declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
Correct Disposal of This Product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
LIMITED WARRANTY
This product comes with a 2-year limited warranty that is valid only if
purchased from Reolink official stores or a Reolink authorized resellers.
Learn more: https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not
satisfied with the product and plan to return, we strongly suggest that you
reset the camera to factory default settings and take it out the inserted SD
card before returning.
Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children.
End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.
FAQs
Do REOLINK RLC-822A outdoor security cameras record all the time?****
The majority of home security cameras are motion-activated, which means that when they notice motion, they will start recording and inform you. Some people have the ability to continuously record video (CVR). An fantastic tool for ensuring home security and the peace of mind that comes with it is a security camera.
How long does an REOLINK RLC-822A outdoor security camera last?****
With proper upkeep and attention, outdoor security cameras may last at least five years.
How far can a REOLINK RLC-822A security camera be from Wi fi?****
A wireless camera shouldn’t be placed too distant from the main hub or wireless router. A wireless camera’s range can go up to 500 feet or more if there is a direct line of sight. The range is often 150 feet or less within a house, however this isn’t always the case.
Do REOLINK RLC-822A security cameras work if the WiFi is off?****
You can install cameras without an internet connection, yes. Many cameras exclusively record locally, using local storage devices as micro-SD cards or hard drives.
Do REOLINK RLC-822A outdoor security cameras work at night?****
Infrared LEDs are increasingly commonly integrated into security cameras to give night vision in dim or no light environments.
What is the longest distance for a REOLINK RLC-822A security camera?****
The higher end of signal ranges for security cameras is typically 500 feet. Most will function within a 150-foot radius.
How much speed does a REOLINK RLC-822A security camera need?****
The absolute minimum needed to watch a security camera system remotely is an upload speed of 5 Mbps. Remote viewing of the lower quality or sub stream is adequate but unrefined at 5 Mbps. We advise having an upload speed of at least 10 Mbps for the best remote viewing experience.
Can REOLINK RLC-822A outdoor security cameras be hacked?****
Home security cameras are no exception to the rule that any internet-connected gadget is vulnerable to hacking. Wi-Fi cameras are more prone to attack than wired ones, while cameras with local storage are less prone to attack than those that store their video on a cloud server. But any camera can be compromised.
How long does REOLINK RLC-822A security camera battery last?****
At most, wireless security camera batteries have a lifespan of one to three years. They are far simpler to replace than a watch battery.
How long do REOLINK RLC-822A security cameras last?****
Considering that the technology is just 20 years old, cameras typically endure between 5 and 10 years. A new, current IP camera should endure two NVR cycles, according to Security-Net. Typically, an NVR cycle lasts three to five years.
Can I connect my REOLINK RLC-822A security camera to my phone without WiFi?****
A wired security camera does not require a wifi connection to operate if it is attached to a DVR or other storage device. As long as you have a mobile data plan, many cameras now offer mobile LTE data, making them an alternative to wifi.
What makes REOLINK RLC-822A security cameras go offline?****
Why Your Security Cameras Might Go Offline. There are generally two causes for security camera inactivity. Either the router is too far away, or there is not enough bandwidth. However, there are other elements that may also play a role in cutting off a security camera’s internet connection.
Do REOLINK RLC-822A outdoor cameras need internet?****
Yes, there is a wireless outdoor security camera that also has internet functionality. Wireless security cameras don’t always require internet access. Some security cameras, however, provide the local recording of their film onto micro-SD cards or hard drives so that it can be viewed at a later time.
How do you power an REOLINK RLC-822A outdoor security camera?****
You only need to install the batteries in wire-free security cameras. Install the power cable into an electrical socket if you purchase a wireless security camera. Additionally, simply connect an Ethernet wire to a router for PoE security cameras.
Which REOLINK RLC-822A security camera is better wireless or wired?****
A wired system will deliver a signal that is more dependable. Additionally, because it won’t be vulnerable to variations in bandwidth, the video quality will always be constant. Since the cameras won’t need to broadcast their video to the cloud, they won’t consume as much bandwidth.
Do REOLINK RLC-822A security cameras use a lot of WiFi?****
Some security cameras can operate in “steady-state” at 5 Kbps, while others can operate at 6 Mbps and higher. 1-2 Mbps is the typical bandwidth use of an IP cloud camera (assuming 1080p using H. 264 codec at 6-10fps). A hybrid cloud camera averages between 5 and 50 Kbps in steady state, which is a small portion of that.
Video
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>