Lenco PMX-240 Party Speaker User Manual

Party Speaker User Manual

Model PMX-240

PMX-240 Party Speaker

User manual-High power DJ mixer system with Bluetooth USB FM and party lights

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

1. Do not use this device near water.
2. Clean only with a slightly damp cloth.
3. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.
4. Install in accordance with the supplied user manual.
5. Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
6. Unplug this device during lightning storms or when unused for a long period.
7. Keep the device away from heat sources such as radiators, heaters, stoves, candles and other heatgenerating products.
8. Avoid using the device near strong magnetic fields.
9. Electrostatic discharge can disturb normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a staticfree environment.
10. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.
11. Do not use in wet or moist areas such as bathrooms, steamy kitchens or near swimming pools.
12. Do not use this device when condensation may occur.
13. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.
14. This device must be well ventilated at all time!
15. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.
16. The socket outlet must be installed near the equipment and must be easily accessible.
17. Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
18. Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
19. Devices with class 2 construction do not require an earthed connection.
20. Keep away from rodents. Rodents enjoy biting on power cords.
21. Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
22. Avoid placing the device on any surfaces that may be subject to vibrations or shocks.
23. To protect the device during a thunderstorm, unplug the ac power adaptor.
24.  When the device is not in use for long periods, unplug the ac power adaptor for safety reasons.
25. To clean the device, use a soft dry cloth. Do not use solvents or petrol based fluids. To remove severe stains, you may use a damp cloth with dilute detergent.
26. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device or battery replacement.
27. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.
28.  The usb memory stick should be plugged into the unit directly. Don’t use an usb extension cable because it can cause interference resulting in failing of data.
29. The apparatus shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.
30. To completely disconnect the power input, the mains plug of the apparatus shall be disconnected from the mains, as the disconnect device is the mains plug of apparatus.
31. The mains plug of the apparatus should not be obstructed or should be easily accessed during intended use.
32. Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
33. Minimum distance of 10cm around the apparatus is needed for sufficient ventilations.
34. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc.
35.  No naked flame sources such as lighted candles should be placed on the apparatus.
36. Attention should be drawn to the environmental aspects of battery disposal.
37. The apparatus can only be used in moderate extremely cold or climates warm environments should be avoided.
38. The rating label has been marked on the bottom panel of the apparatus.
39. This device is not intended for use by people (including children) with physical, sensory or mental disabilities, or a lack of experience and knowledge, unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.
40. This product is intended for household use only and not for commercial or industrial use.
41. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.
42. Never remove the casing of this apparatus.
43. Never place this apparatus on other electrical equipment.
44. Do not use or store this product in a place where it is subject to direct sunlight, heat, excessive dust or vibration.
45.  Do not clean this product with water or other liquids.
46.  Do not block or cover the slots and holes in the product.
47. Do not push foreign objects into the slots or holes in the product.
48. Do not allow children access to plastic bags.
49. Please check that the voltage on the type plate of your appliance corresponds with your house electricity supply (type plate is located on the back of the unit).
50. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
51. Only use attachments/accessories specified by the manufacturer.
52. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or the plug, when liquid has been spilled or objects have fallen into the apparatus, when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
53. Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.
    Warning: prolonged exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

INSTALLATION

• Unpack all parts and remove protective material.
• Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.
• Do not cover any vents and make sure that there is a space of several centimeters around the unit for ventilation.

REAR PANEL

1. Power Switch
   Switch modes DC INPUT, AC INPUT or off.
   When switched to AC status, the speaker is working on 230V and Battery will be charged.
   When switched to OFF, power is off with no battery charging.
   When switched to DC, speaker is battery powered.

2. DC 12V INPUT
   The speaker can be connected to the 12V DC battery of a car.

3. FM ANTENNA

4. AC INPUT AC 230V~, 50Hz

FRONT PANEL

1. LED DISPLAY
   Display System parameter information, the left side of the display shows the INPUT A status, the right side of the display shows the INPUT B status

2. VOLUME/MULTI/DJ EFFECT
   Rotate the knob to adjust the main volume, phones volume, treble, bass. Short press this key to choose different music effect SCRATCH, REVERB, BEAT BOX, YEAH, BRING IT, GEYA, COME ON Long press plays DRUMS effect.

3. PHONES MODE
   Press this key to choose different EARPHONES mode, INPUT A, INPUT B, INPUT AB

4. INPUT B PREV
   Press this key to choose previous music with USB B

5. INPUT B NEXT
   Press this key to choose next music with USB B

6.  INPUT B VOLUME
   This is used to adjust the volume with INPUT B

7. INPUT B PLAY/PAUSE
   Press this key to choose play/pause music with INPUT B When playing usb, long press this key to change playtime count down or count up.

8. INPUT B MODE
   Press this key to choose different INPUT B mode, LINE, USB B

9. EARPHONES INPUT JACK

10. USB B input jack

11. GUITAR VOLUME
    Adjust the volume of the GUITAR

12. MIC VOLUME
    Adjust the volume of the MICROPHONE

13. ECHO
    Adjust the ECHO of the MIC input

14. GUITAR jack

15. MIC jack

16. LlNE IN AUDIO INPUT JACK
    Connect to LINE IN signal input jack.

17. DC POWER light

18. AUX AUDIO INPUT JACK
    Connect to AUX signal input jack.

19. USB A input jack

20. On AC: CHARGE/STANDBY/NORMAL
    A long Press on this key turns on or standby the unit. A short Press on this key turns on the unit to CHARGE, STANDBY or NORMAL mode On DC: BAT LEVEL
    A Press on this key shows the current battery level.

21. INPUT A MODE
    Press this key to choose different INPUT A mode, AUX A, BT A, FM, USB A

22. INPUT A PLAY/PAUSE
    Press this key to choose play/pause music with INPUT A When playing usb, long press this key change play time count down or count up.

23. INPUT A VOLUME
    This is used to adjust the volume of INPUT A

24. INPUT A NEXT
    Press this key to choose next music with USB A

25. INPUT A PREV
    Press this key to choose previous music with INPUT USB A

26. MENU
    This switch selects the main volume, bass, treble, x driver, light mode

REMOTE CONTROL

1. LIGHT
2. STANDBY
3. NUMBER BUTTON
4. TUNING
5. CHANNEL
6. VOLUME+
7. X DRIVE
8. TREBLE+
9. VOLUME
10. TREBLE
11. AUX-A
12. USB-A
13. USB-A F.WARD
14. USB-A B.WARD
15. LINE
16. USB-B
17. USB-B F.WARD
18. USB-B B.WARD| 19. MUTE
20. FM
21. AUTO
22. TUNING+
23. CHANNEL+
24. BT
25. DISCONNECT
26. BASS+
27. BASS
28. INPUT-A REPEAT
29. INPUT-A PAUSE
30. INPUT-A PREVIOUS
31. INPUT-A NEXT
32. INPUT-B REPEAT
33. INPUT-B PAUSE
34. INPUT-B PREVIOUS
35. INPUT-B NEXT
---|---

REMOTE CONTROL OPERATION:
□ If the remote control conflicts with other devices, the operation will be affected.
□ Do not simultaneously press buttons on the unit and the remote control.
□ Avoid using two remote controls at the same me as this wiII cause a malfunction.
□ Use only UM-4 ‘AAA’ size batteries. Do not mix old batteries with new ones.
□ If the batteries Ieak, clean the remote control thoroughly before replacing batteries
□ Do not short two terminals of the batteries. Dispose old batteries in a suitable place.

OPERATING

NORMAL FUNCTION

1. Select power switch on the backside of the speaker to AC or DC mode.

2. Select an audio source by pressing the INPUT A key on the front panel to display AUX A, BT A, FM, USB A. Press the INPUT B key on the front panel to display LINE, USB B.
   When unit is AC mode:
   – Pressing standby button once will activate charging mode, showing the battery charging status on the blue led-display.
   – Pressing standby button second time will activate the speaker and showing green charging light.
   – You can also select the standby mode, without charging the battery
   When unit is DC mode:
   – Pressing standby button shows the battery level on the blue led display

3. Rotate the VOLUME/MULTI/DJ EFFECT wheel on the control panel or the VOL+/- key on the remote control to adjust the main volume. Then adjust the volume slider of INPUT A and use the right volume slider to change the volume of INPUT B.

4. To adjust the bass, treble, X-drive, speaker lights and main volume, press the menu key to select bass, treble, X-drive, speaker lights, then rotate the big  VOLUME/MULTI/DJ EFFECT wheel.

5. PHONES OUTPUT selection. Press the PHONES MODE button on the control panel to display INPUT A, INPUT B, or INPUT AB and adjust the volume of A,B or AB by rotating the multi DJ effect wheel.

6. Press the LIGHT button on the remote control or press the MENU button on the front panel until speaker light mode is displayed, then rotate the VOLUME/MULTI/DJ EFFECT wheel to select to OFF, R, G, B, RG, RB, GB, RGB, AUTO, DEMO light mode.

7. Press the MUTE key on the remote to mute, press it again to reset.

8. Press X DRIVE on the remote to turn on/off X-Bass effect.

SPEAKER LIGHT COLOR CONTROL OPTIONS

• R = red lights flash
• G = green lights flash
• B = blue lights flash
• RG = red and green lights flash RB = red and blue lights flash GB = green and blue lights flash
• RGB = red, green, and blue lights flash
• Auto = the various color combinations cycle through and flash.
• Demo = lights flash and change color as if they were responding to the beat of the music.

TUNER APPLICATIONS

1. Before using the radio functions, you must adjust the antenna to obtain optimum reception.
   Press the INPUT A key on the front panel or the FM key on the remote control, to select “FM” function.

2. Press the AUTO key on the remote control or the play button of the INPUT A control panel.
   The machine will scan radio channels from low- frequency to high-frequency by itself and stores the channels found one by one.

3. Press the CH+/CH- key on the remote control to change radio presets that have been stored previously.

4. Press or hold the TU+/TU- key on the remote control to adjust the radio frequency manually.

5. To select radio stations from the control panel, press and hold the next/prev buttons.

KARAOKE & GUITAR FUNCTION

1. The machine can auto detect whether a MICROPHONE or GUITAR is connected.
2. Please turn off the microphone volume with the MIC.VOL knob on the front panel and adjust the volume gradually after inserting the microphone. Remark: The PMX-240 is delivered with a wireless microphone using 2AA batteries (not included). When you switch the button to “ON”, you can speak in it and adjust volume and echo on the control panel.
3. Adjust the ECHO knob on the front panel to change the microphone ECHO.
4. Adjust the GUITAR VOL knob on the front panel to change the guitar VOLUME.

Note: Do not touch the top of the microphone when singing in order to avoid howling effect.
Adjust the microphone volume gradually to avoid howling effect.

BLUETOOTH PAIRING AND CONNECT

• Turn off any Bluetooth devices previously paired (linked) with this unit.
• Turn on the Bluetooth feature on your phone or music player.
• Turn on and set this unit to Bluetooth mode. The flashing blue light “BT” on LED display indicates it is in pairing mode.
• Set your phone or music player to search for Bluetooth devices.
• Select ‘PMX-240’ from search results on your phone or music player.
• Select OK or YES to pair this unit with your phone or music player.
• If protected, enter 0000 for passkey steady blue light indicates successful connection.
• Press the DISCONNECT key on the remote control to disconnect the Bluetooth.

FUNCTION OF USB READER

USB interface
This unit has two USB jacks. Press the INPUT A key to select USB A, then you can insert a USB stick to play music. Press the INPUT B key to select USB B, then you can insert another USB stick to play music.
Important: The USB port is intended for data transfer only, other devices cannot be used with this USB connection. The use of USB extension cords is not recommended.
TIME DISPLAY
In USB mode, the display can show either the elapsed or the remaining time.
With long press of the play/pause key, you can select negative or positive display of the time.

CHARGING THE BATTERY

1. When in battery powered mode, the standby operation cannot be used.
2. The control panel has a charging light. When the battery is charged enough, the light is green. When the battery is low, the system display prompts ‘LOW POWER’ and the light turns red.

TO PROTECT THE LIFETIME OF THE INTERNAL BATTERY:
When the battery is empty, switch immediately the POWER knob on the backside to OFF position to protect the lifetime of the internal battery or to AC to charge it again.
Important: The supplier is not responsible for damage caused by misuse of the device and the battery will not be covered by the guarantee.

BATTERY DISASSEMBLY

1. Remove the screws on the rear panel.
2. Take out the battery.
3. Disconnect the battery

ACCESSORIES

SPECIFICATION

• The specification presents only as a reference. The value of weight and size are approximation.
• Our product is improved ceaselessly and the specification and function may be changed without prior notice.

This product operates at 2400 – 2483.5 MHz and is designated only to be used inside a normal household environment. This product is suited for this purpose within all EU counties.
Please note (For use of wireless microphone)
This product operates at a frequency of 864 MHz and is designated only to be used inside a normal household environment. This product is suited for this purpose within most EU countries.
The user should check the allowed frequencies of the country where the unit will be used in. (More information can be found at: https://www.apwpt.org)
The user is responsible for the use of this unit. Lenco cannot be held responsible if this unit is used for other purposes than which are described in this manual.

Guarantee

Lenco offers service and warranty in accordance to European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.
Important note: It is not possible to send products that need repairs to Lenco directly. Important note: If this unit is opened or accessed by a none official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be void.

Disclaimer

Updates to Firmware and/or hardware components are made regularly. Therefore some of the instruction, specifications and pictures in this documentation may differ slightly from your particular situation. All items described in this guide for illustration purposes only and may not apply to a particular situation. No legal right or entitlements may be obtained from the description made in this manual.
Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose them in accordance to any applicable local laws of requirement for disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlan

References

• Lenco.com | Officiële Lenco Webshop‎
• APWPT – Frequenzbedarf, Frequenznutzung und Frequenzpolitik

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>