iCT H4985L Coin Acceptor Multi-Coin Seletor Installation Guide
- June 3, 2024
- ICT
Table of Contents
iCT H4985L Coin Acceptor Multi-Coin Seletor
Use of Materials Limitations
International Currency Technologies Corporation (ICT) all rights reserved.
All materials contained are the copyrighted property of ICT.
All trademarks, service marks, and trade names are proprietary to ICT.
ICT reserves the right at all times to disclose or to modify any information
as ICT deems necessary to satisfy any applicable law, regulation, legal
process or governmental request, or to edit, refuse to post or to remove any
information or materials, in whole or in part, in ICT’s sole discretion.
Introduction
Overview
UCA series is designed as reliable coin acceptors which are able to work
steadily in high temperature for high-security with acceptance rate up to 96%
or greater. Moreover, UCA Series includes UCA2 and UCAES for different
accepted coins and applications to fulfill your needs.
Features
- Low power consumption.
- Eight coin channels available at once.
- Mechanical and electrical anti-string functions.
- Accepting speed up to 3 coins per second.
- Coin sorter option available for UCA2 and UCAES.
Specifications
General
Acceptance Rate 96 % or greater
Accepting Speed Approx. 3 coin/sec
Interface Pulse RS232 (TTL level)
Coin Parameters Diameter : 20mm-32mm
Thickness: 1.2mm-3.2mm
Electrical
Power Source 12V±10% (10.8V-13.2V DC)
Power Consumption
Standby : 0.05A, 0.6W
Operation: 0.2A, 2.4W
Maximum: 0.5 A, 6W
Operation Environment
Operation Temperature: -5°C-60°C
Storage Temperature: -20°C-75°C
Humidity: 30%-85% RH
Mechanical
Outline Dimension Refer to page. 4
Net Weight Approx. 0.35 kg
Packing List
Main UCA Series Coin Acceptor
Accessory
Harnesses: Refer to 5-2
UCA Series Installation Guide
UCA Series Switches Setting Guide
Mode Type
Pulse
| Harness
Refer to 5-2
| Others
Screw pack
---|---|---
RS232| Refer to 5-2| Screw pack
Dimension
Installation
How to Install?
To install UCA Series coin acceptor on your machine, please follow the steps
as below:
UCA Series is not supposed to be as lope over 3°.
To make sure UCA Series work smoothly, install machine farther than 3 cm from metal items is recommended.
Harness Application
1/0 Circuits
Pulse Interface.
RS232 Interface.
DIP Switch Setting
The DIP switches are located on side of UCA Series. DIP switch setting
varies according to different functions which are used by users. For DIP
switch setting which fits your needs, please refer to “UCA Series Switch
Setting” guide in the package.
Software Download and Upgrade
To download and upgrade the software to UCA Series, the programmer (FP-004)
is needed. Please contact ICT to purchase FP-004 and refer to FP-004 user
guide for software download and upgrade information.
Maintenance
To make sure UCA Series coin acceptor always works smoothly, please clean the
internal sensors regularly.
To clean the internal sensors:
- Remove bezel by releasing mounting clips and pulling it out.
- Release the clip and remove lower base cover plate and hood.
- Use a soft, dry cloth, or towel to clean lens.
- Open upper base cover plate and then use a soft, dry cloth, or towel to clean sensors.
Troubleshooting
If the error can not be solved after corrective actions or happen again, please contact ICT or agents for technical support.
No.28, Ln. 15, Sec. 6, Minquan E. Rd., Neihu Dist., Taipei City 114, Taiwan
sales@ictgroup.com.tw (For Sales)
fae@ictgroup.com.tw (For Customer Service)
Website: www.ictgroup.com.tw
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>