LUXSHARE-ICT DP 2.1 Test Fixture (RF Cable Type) User Manual
- June 9, 2024
- LUXSHARE-ICT
Table of Contents
LUXSHARE-ICT DP 2.1 Test Fixture (RF Cable Type) User Manual
1. Introduction
This document introduces the product and electrical specifications of the DP 2.1 Test Fixture (RF Cable Type).
2. Objectives
This specification provides the characteristics of DP 2.1 Test Fixture (RF Cable Type) and it is used to test DP 2.1 cable and system.
3. Product Description
3-1. DP 2.1 Test Fixture (RF Cable Type)
DP 2.1 Test Fixture (RF Cable Type) is used for DP cable compliance test.
3-2. DP 2.1 Calibration Board (RF Cable Type)
DP 2.1 Calibration Board (RF Cable Type) is use to do de-embedding the electrical length and losses within the DP 2.1 Test Fixture (RF Cable Type ).
3-3. DP AUX Control Board
DP AUX Control Board is use to transfer the low-speed signal from DP 2.1 Test Fixture (RF Cable Type) to the DP Cable and DPR100/DPR200. Please refer to section 4-2 & 4.3.
4. User Models
Test setup includes but not limited to the following examples:
4-1. Cable Test Setup
4-2. System Test Setup (Soure Test)
4-3. System Test Setup (Sink Test)
5. DP 2.1 Test Fixture (RF Cable Type) Electrical Specification
6. Reference DP Specification
- Keysight Method of Implementation (MOI) for Display Pory (DP) Version2.1 Passive DP80/DP40 Cable Compliance Test
- VESA DisplayPort (DP) Standard Version 2.1 Enh DP Additions Section 4.1 Jun 2022 R10
- VESA DisplayPort (DP) Standard Version 2.1 Enh DP Additions Section 4.2 Jun 2022 R9
LUXSHARE-ICT Co., Ltd DP 2.1 (RF Cable Type) Test Fixture