TREND TP4396 1 Light Pendant Instruction Manual
- June 3, 2024
- trend
Table of Contents
TP4396 1 Light Pendant
Instruction Manual
INSTALLATION INSTRUCTIONS
Please read carefully and save these instructions, as you may need them at a later date
1. OUTLET BOX
2. WIRE CONNECTOR
3. BLACK WIRE
4. WHITE WIRE
5. GROUND WIRE
6. BOX SCREW
7. MOUNTING SCREW| 8. HEX NUT
9. MOUNTING BAR
10. GROUND SCREW
11. CANOPY
12. BALL NUT
13. BAR
14. SHADE
15. BULB
---|---
CAUTION
WARNING: Risk of Fire. Consult a qualified electrician to ensure correct
branch circuit conductor. Min 90ºC supply conductors.
Turn off the main power at the circuit breaker before installing the fixture,
in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.). standards. If you are unfamiliar with proper
electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation
instructions.
ASSEMBLY AND INSTALLATION
-
Secure the mounting bar(9) with box screws(6) to the outlet box(1).
-
Pull out the outlet wire and ground wire from the outlet box. Make wire connections with Wire Connector(2)
–Black wire from light to Black wire (3) from power source.
–White wire from light to White wire(4) from power source.
–Loop the ground wire(4) to mounting bar(9) with a ground screw(6). -
Attach the canopy(11) against the outlet box(1). Secure with the ball nut(12) and mounting screw(7).
-
Loosen the bar (13),slide the shade (14) up along the socket. Insert the bulb (15) into socket.
-
Put the bar(13) back through the shade to secure.
DO NOT USE BARE HANDS TO TOUCH THE BULB.
INSTALLATION IS NOW COMPLETE.