Yealink WPP30 Wireless Presentation Pod User Guide
- June 3, 2024
- Yealink
Table of Contents
WPP30 Wireless Presentation Pod
User Guide
Quick Start Guide (V1.0)
Package Contents
Pair WPP30 to the Endpoint
WPP30 supports RoomCast/MeetingBar series/MeetingEye series/MVC series
endpoint.
If you purchase one of above endpoints and WPP30 together, they are already
paired. Just connect the WPP30 to your computer for sharing content.
If you purchase the WPP30 separately, you need to pair endpoint and WPP30
manually.
To pair endpoint and WPP30 manually:
- Connect the WPP30 to the USB-A port on the endpoint.
- Disconnect the WPP30 after the monitor prompts “ Wireless Presentation Pod is Paired successfully ”.
Start or Stop Sharing Content
-
Connect the WPP30 to the USB-A/USB-C port on your computer.
Wait Yealink Wireless Presentation Pod software pops up.
-
On the WPP30, press the presentation button to share full screen.
Press the presentation button again to stop sharing.
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +14 to 122°F (-10 to 50°C)
- Relative humidity: 5% to 90%, noncondensing
- Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in
accordance with the operating instructions and the system environment. We are
not liable for damage or loss resulting
from the use of this product, or for any claim from a third party. We are not
liable for problems with Yealink device arising from the use of this product;
we are not liable for financial damages, lost profits, claims from third
parties, etc., arising from the use of this product.
DC symbol
is the DC voltage symbol.
Restriction of Hazardous Substances Directive (RoHS) This device complies with
the requirements of the EU RoHS Directive. Statements of compliance can be
obtained by contacting support@yealink.com
Safety Instructions
Save these instructions. Read these safety instructions before use! The
following basic safety precautions should always be followed to reduce risk of
fire, electrical shock, and other personal injury.
**General Requirements**
- Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
- During the process of storage, transportation, and operation, please always keep the device dry and clean.
- During the process of storage, transportation, and operation, please avoid collision and crash of the device.
- Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
- Without prior written consent, no organization or individual is permitted to make any change to the structure or the safety design of the device. Yealink is under no circumstance liable to consequences or legal issues caused by such changes.
- Please refer to the relevant laws and statutes while using the device. Legal rights of others should be respected as well.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
- Keep the device dry and free of dusts.
- Place the device on a stable and level platform.
- Please place no heavy objects on the device in case of damageand deformation caused by the heavy load.
- Keep at least 10 cm between the device and the closest object for heat dissipation.
- Do not place the device on or near any inflammable or firevulnerable object, such as rubber-made materials.
- Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
- Keep thedevice away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator.
Operating Requirements
- Do not let a child operate the device without guidance.
- Do not let a child play with the device or any accessory in case of accidental swallowing.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Pleaseusethe provided surge protection power socket only.
- Before plugging or unplugging any cable, make sure that your hands are completely dry.
- Do not spill liquid of any kind on the productor use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
- Do not tread on, pull, or over-bend any cable in case of malfunction of the device.
- During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
- If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
- When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair.
- Do not insert any object into equipment slots that is not part of the product or auxiliary product.
- Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.
**Cleaning Requirements**
- Before cleaning the device, stop using it and disconnect it from the power supply.
- Use a piece of soft, dry and anti-static cloth to clean the device.
- Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.
ENVIRONMENTAL RECYCLING
Never dispose of the device with domestic waste
Ask your Town Council about how to dispose of it in an environmentally
friendly way. The cardboarc box, plastic packaging and player components may
be recycled in accordance with prevailing
recycling regulations in your country.
Always adhere to prevailing regulations
Those who fail to do so may be fined or prosecuted in accordance with the law.
The crossed out garbage can that appears on the device means that when it has
reached the end of its useful life, it should be taken to a special waste
disposal centre and treated separately to general urban waste.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
- Clean the plug with a dry cloth.
- Connect it to another wall outlet.
The usage environment is out of operating temperature range.
- Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
- Connect the cable correctly.
You cannot connect the cable properly.
- You may have connected a wrong Yealink device.
- Use the correct power supply.
Some dust, etc., may be in the port.
- Clean the port.
Contact your dealer or authorized service facility for any further questions.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City,
Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam,
The Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
**Declaration of Conformity
We,**
YEALINK(XIAMEN) NETWORK TECHNOLOG Y CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
Manufacturer: YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD
Address: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R. China
DATE: 28th/May/2022 declare that the product
Type: Wireless Presentation Pod
Model: WPP30
meets the essential requirements and other relevant provisions according to
the following EC directive
Directive: 2014/30/EU, 2014/35/EU,RED 2014/53/EU
Conformity
The product complies with the following standards:
Safety : EN IEC 62368-1:2020+A11:2020
EMC:EN 55032:2015, EN 55035:2017, EN61000-3-2: 2014, EN61000-3-3: 2013,
Radio:ETSI EN 301 489-1 V2.2.0, ETSI EN 301 489-17 V3.2.0, ETSI EN 300 328
V2.1.1, ETSI EN 301 893 V2.1.1, EN 300 440 V2.1.1, EN 303 687 V0.0.14
Health :EN 62311:2008EN62479:2010
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the
Council of 8 June 2011 and 4 June 2015 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and of the Council of.
4.July.2012 on Waste electrical and electronic equipment(WEEE)
Regulation (EC) No.1907/2006 of the European Parliament and of the Council of
18.December.2006 on Registration, Evaluation, Authorization, and Restriction
of Chemicals (REACH)
NAME: Huahu Wang
DATE: 28th/May/2022
TITLE: Manager
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright©2022 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>