Elna eXtend 845 Professional with Overlocking Instruction Manual
- June 15, 2024
- Elna
Table of Contents
Elna eXtend 845 Professional with Overlocking
Product Information
Specifications
- Model: elna 845
- Optional Accessories:
- 200-810-007 Adjustable bias binder foot
- 202-254-003
- 202-247-003 Chain stitch foot (F) with 2 guides
- 200-801-304 Cover hem foot (M)
- 202-255-004 Blind stitch foot (D)
- 200-807-001 Gathering foot
- 200-808-002 Belt loop foot
- 200-805-009 Multi-purpose foot
- 200-809-003 Clear view beading and pearl foot
- 200-803-306 Clear view chain stitch foot (F)
- 202-248-004 Multi-purpose foot with 3 elastic gatherers
- 200-802-202 Pintuck foot (K)
- 200-814-104 Piping foot
- 200-803-203 Felling guide (F-4)
- 496-245-20 Taping foot (Q)
- 200-801-108 Hem guide (H-2)
- 797-812-004 Top cover foot (R)
- 200-804-101 Topstitch covered stitch foot (N)
- 200-803-007 Fagoting guide (F-2)
- 200-801-005 Lace attachment guide (H-1)
- 200-801-201 Wrapped edge guide (H-3)
- 200-804-008 Topstitch guide (N-1)
- 200-803-100 Lacing guide (F-3)
- 200-802-006 Pintuck guide
- 797-881-004 Quilt guide
- 200-802-305 Cord guide
- 797-343-009 Round thread guide
- 200-812-102 Attachment holder support set
- 200-814-001 Tape guide attachment
- 396-001-42 Cloth guide deluxe
- 797-342-008 Top cover hook
- 200-811-008 Auxiliary thread guide
- 200-805-102 Elastic gatherer 7.5 mm width
- 200-812-009 Curve guide
- 200-805-205 Elastic gatherer 10 mm width
- 200-805-308 Elastic gatherer 13 mm width
- 395-800-02 elna Serger tote
- 797-866-106 Waste tray
- 200-347-020 Universal manual needle threader
- 494-805-006 Side pockets for sewing table sewing table
- 494-709-009 Side table without insert space
- 301-804-004 elna mat
Product Usage Instructions
Step 1: Setting up the elna 845
Before using the elna 845, make sure to set it up properly. Follow the steps below:
- Place the sewing machine on a stable and flat surface.
- Connect the power cord to a power outlet.
- Insert the needle into the needle holder and tighten it securely.
- Wind the thread onto the bobbin and insert it into the bobbin case.
- Thread the upper thread through the machine following the threading diagram in the user manual.
Step 2: Selecting and Attaching Accessories
The lna 845 comes with a variety of optional accessories. Follow the steps below to select and attach the desired accessory:
- Refer to the user manual to identify the accessory you want to use.
- Locate the accessory and ensure it is compatible with the elna 845.
- Attach the accessory to the machine according to the instructions provided in the user manual.
Step 3: Operating the elna 845
Once the machine is set up and accessories are attached, you can start using the elna 845. Follow these steps:
- Select the desired stitch pattern using the stitch selection dial.
- Adjust the stitch length and width as needed using the corresponding controls.
- Place the fabric under the presser foot, aligning it with the desired stitching line.
- Lower the presser foot lever to secure the fabric.
- Press the foot pedal gently to start sewing.
- Guide the fabric along the stitching line, keeping it straight and steady.
- Release the foot pedal to stop sewing.
FAQ
Q: Can I use accessories from other elna models with the elna 845?
A: The elna 845 is compatible with specific optional accessories listed in the user manual. It is recommended to use accessories designed for the elna 845 to ensure proper fit and functionality.
Q: How do I clean the elna 845?
A: To clean the elna 845, follow these steps:
- Turn off the machine and unplug it from the power outlet.
- Remove any loose threads or fabric scraps from the sewing area.
- Use a soft, dry cloth to wipe the exterior surfaces of the machine.
- If necessary, use a small brush or vacuum attachment to remove dust from hard-to-reach areas.
- Avoid using liquid cleaners or submerging the machine in water.
Optional Accessories
V1 10.2023
Subject to change without notice