Zhongshan City Riyueda Lighting Appliance GP-F01 Fan Lamp Remote Control User Manual
- June 5, 2024
- Zhongshan City Riyueda Lighting Appliance
Table of Contents
Zhongshan City Riyueda Lighting Appliance GP-F01 Fan Lamp Remote Control
User Manual
Fan Lamp Remote Control, User Manual
Product Description: RF Control
Model GP-F01
Learning method of remtor constrol Power on the receiver, then press the key in the rount hole at the side of the receiver, press the 1H key at the top right corner of the control handle at the same time. The learning is successed, when the hear the long ringring form the loudspeaker
Wire Diagram of Receiver
White: Neutral Wire for Fan
Blue: Live Wire for Lamp control
Black: Live Wire for Fan
Installation Diagram of receiver
Power Parameters Table
Fan 2A for Fan
110-130V On/Off 500W
- RF wireless digital transmission technology is adopted to realize the one-to-one control proviing a rate of coincident code less than 1/50000. Same code number is attached to the back of the emitter and the receiver, it is required to return a pair of the same code number of emitter / receiver to the manufacturer for repair service in case of any damager.
- In a sufficient space, you can use the receiver at any angle, no worry about the direction. If both the fan and the lamp are equiped with a switch, please switch the fan to the highest speed and turn on the lamp before use of the remote control.
Instructions for use of Emitter
- -Switch indicator
- Speed Controll
- . Fan Shutdown
- . Timer
- Lamp Switch
- Battery for Switch 12V 2,3A
Actual use shall be subject the real product
FCC Statement:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help. Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>