MARANO Convex Slat System Instructions

: June 3, 2024
: MARANO

Table of Contents

COMPONENTS
Concrete-In Posts
Bolt-Down Posts
BESPOKE POSTS
INSTRUCTIONS
Documents / Resources

Convex Slat System
Fully modular aluminum
fencing system
LIGHT STYLE VISION
**Instructions

**

COMPONENTS

MARANO Convex Slat System - fig1

ID	Description	Size mm	Colour	Code
1	6m Long Convex Fence Slat	–	Mill Finish	76S001R
–	RAL 7012 Basalt Grey	76S001A
–	Golden Oak Wood Effect	76S001G
2	Plastic End Caps	–	Black	765001 CB
3	Angle 1.5mm Thick	1500 x 40 x 20	RAL 9005 Black	76A001B12
1500 x 40 x 20	RAL 9005 Black	76A001B18
1800 x 40 x 20	RAL 7012 Basalt Grey	76A001A18
1800 x 40 x 20	Golden Oak Wood Effect	76A001G18
4	Self Tapping Screw Panhead – Stainless Steel (x 200)	4.2 x 13	–

5004PS4213
Screws for Fixing Boards – BZP (x 100)| 4.2 x 12| –| 76SS4212D
5| Bolt-Down Post for 1.2m High Fence| 1155 x 50.8 x 50.8| Black Gloss| 76PB5012B
Concrete-In Post for 1.2m High Fence| 1750 x 50.8 x 50.8| Black Gloss| 76PC5012B
Bolt-Down Post for 1.8m High Fence| 1865 x 76.2 x 76.2| Black Gloss| 76PB7518B
6| Plastic In-line Connector| | Black| 76S0011B

All components are aluminium unless otherwise stated.
Key:

Description	Symbol	Information
Drill		You will need a crosshead M4 attachment
Aluminum Saw		Use a fine tooth aluminum saw with a clean, sharp blade when

cutting posts or slats
Rubber mallet| | For securing slats on top of each other and the top cap onto the last slat
Bolt-Down| | 4 x M12 bolts required to fix each bolt-down post
Concrete-In| | Place 565-570mm into the ground. For further stability, we suggest inserting a galvanized steel tube 0 26.9 x 300mm (cut from code: 160225) horizontally through the concrete pouring hole

Concrete-In Posts

MARANO Convex Slat System - fig2

Fence Height
m|

Ground Clearance (B)
mm

| Concrete-In (C)
mm| Post Size
HxWxDmm| Code
---|---|---|---|---
1130| 50| 570| 1750 x 50.8 x 50.8| 76PC5012B
1830| 50| 570| 2440 x 76.2 x 76.2| 76PC7518B

Bolt-Down Posts

Fence Height
m| Ground Clearance (A)
mm| Post Size
H x W x D mm| **Code
---|---|---|---
1130| 50| 1155 x 50.8 x 50.8| 76PB5012B
1830| 50| 1865 x 76.2 x 76.2| 76PB7518B**

IMPORTANT: Please refer to the table below when determining fence height and gap between boards.

Fence Height (A)
m| Gap Between Boards
to Reach Fence Height mm|

Ground Clearance mm

| Number of Boards Needed
---|---|---|---
No Gap| 20mm Gap| 40mm Gap| No Gap| 20mm Gap| 40mm Gap
1.2| 1050| 1110| 1130| 50| 10| 9| 8
1.8| 1850| 1830| 1830| 50| 18| 15| 13

BESPOKE POSTS

Our 1.2 and 1.8m posts for the Marano Convex system can be easily cut to size to suit your needs. Boards can also be cut to length as required. MARANO
Convex Slat System - fig4 IMPORTANT: Please refer to the table below when determining fence height and gap between boards.

O/A Fence Height m| Gap Between Boards mm| Ground Clearance mm| Number of Boards Required
---|---|---|---
No Gap| 20mm| 40mm| No Gap| 20mm| 40mm
D| 950| 990| 850| 50| 9| 8| 6
1050| 1110| 990| 50| 10| 9| 7

Bolt-down post for 1.2m high fence. Code: 76PB5012B.
Concrete-in post for 1.2m high fence. Code: 76PC5012B.

MARANO Convex Slat System - fig6

O/A Fence Height m| Gap Between Boards mm| Ground Clearance mm| Number of Boards Required
---|---|---|---
No Gap| 20mm| 40mm| No Gap| 20mm| 40mm
D| 1350| 1230| 1130| 50| 13| 10| 8
1450| 1350| 1270| 50| 14| 11| 9
1550| 1470| 1410| 50| 15| 12| 10
1650| 1590| 1550| 50| 16| 13| 11
1750| 1710| 1690| 50| 17| 14| 12

Bolt-down post for 1.8m high fence. Code: 76PB7518B.
Concrete-in post for 1.8m high fence. Code: 76PC7518B.

INSTRUCTIONS

MARANO Convex Slat System - fig7 Please note : Post centre measurements are shown as a guide only. Whilst we do our best to advise and guide, it remains the installers responsibility to ensure the final installation complies with any current building regulations and is securely installed. As we have no knowledge of the location, ground type, or the layout of your system, we would always advise customers to consider these factors and adjust as appropriate.