MARANO Convex Fully Modular Aluminium Fencing System Installation Guide
- June 4, 2024
- MARANO
Table of Contents
Convex Installation Instructions
LIGHT – STYLE – VISION
The fully modular aluminum fencing system
COMPONENTS
| ID | Description | Size mm | Colour | Code |
|---|---|---|---|---|
| 1 | 6m Long Convex Fence Slat | 1100 x 2350 | RAL 7012 Grey Basalt | 76S001A |
| 1700 x 2350 | Golden Oak Wood Effect | 76S001G | ||
| 2 | Plastic End Caps | – | Black | 76S001CB |
| 3 | Angle 1.5mm Thick | 1500 x 40 x 20 | RAL 9005 Black | 76A001B12 |
| 1500 x 40 x 20 | RAL 9005 Black | 76A001B18 | ||
| 1800 x 40 x 20 | RAL 7012 Grey Basalt | 76A001A18 | ||
| 1800 x 40 x 20 | Golden Oak Wood Effect | 76A001G18 |
4
| Self-Tapping Screw Panhead – Stainless Steel (x 200)| 4.2 x 13| –|
5004PS4213
Screws for Fixing Boards – BZP (x 100)| 4.2 x 12| –| 76SS4212D
5| Bolt-Down Post for 1.2m High Fence| 1155 x 50.8 x 50.8| Black Gloss|
76PB5012B
Concrete-In Post for 1.2m High Fence| 1750 x 50.8 x 50.8| Black Gloss|
76PC5012B
Bolt-Down Post for 1.8m High Fence| 1865 x 76.2 x 76.2| Black Gloss|
76PB7518B
6| Plastic In-line Connector| –| Black| 76S001IB
All components are aluminum unless otherwise stated.
Key:
Description
| Symbol|
Information
---|---|---
Drill| | You will need a crosshead M4 attachment
Aluminum Saw| | Use a fine-tooth aluminum saw with a clean, sharp blade when
cutting posts or slats
Rubber mallet| | For securing slats on top of each other and the top cap onto
the last slat
Bolt-Down| | 4 x M12 bolts are required to fix each bolt-down post
Concrete-In| | Place 565-570mm into the ground. For further stability, we
suggest inserting a galvanized steel tube Ø 26.9 x 300mm (cut from code:
160225 ) horizontally through the concrete pouring hole
Concrete-In Posts
Fence Height
m| Ground Clearance (B)
mm| Concrete-In (C)
mm| Post Size
H x W x D mm| Code
---|---|---|---|---
1130| 50| 570| 1750 x 50.8 x 50.8| 76PC5012B
1830| 50| 570| 2440 x 76.2 x 76.2| 76PC7518B
Bolt-Down Posts
Fence Height
m| Ground Clearance (B)
mm| Post Size
H x W x D mm| Code
---|---|---|---
1130| 50| 1155 x 50.8 x 50.8| 76PB5012B
1830| 50| 1865 x 76.2 x 76.2| 76PB7518B
IMPORTANT: Please refer to the table below when determining fence height and gap between boards.
Fence Height (A)
m| Gap Between Boards to Reach Fence Height mm| Ground
Clearance mm| Number of Boards Needed
---|---|---|---
No Gap| 20mm Gap| 40mm Gap| No Gap| 20mm Gap| 40mm Gap
1.2| 1050| 1110| 1130| 50| 10| 9| 8
1.8| 1850| 1830| 1830| 50| 18| 15| 13
BESPOKE POSTS
Our 1.2 and 1.8m posts for the Marano Convex system can be easily cut to size to suit your needs. Boards can also be cut to length as required.
IMPORTANT: Please refer to the table below when determining fence height and gap between boards.
O/A Fence Height m
| Gap Between Boards mm| Ground Clearance mm| Number of Boards
Required
---|---|---|---
No Gap| 20mm| 40mm| No Gap| 20mm| 40mm
D| 950| 990| 850| 50| 9| 8| 6
1050| 1110| 990| 50| 10| 9| 7
Bolt-down post for 1.2m high fence. Code: 76PB5012B.
Concrete-in post for 1.2m high fence. Code: 76PC5012B.
O/A Fence Height m
| Gap Between Boards mm| Ground Clearance mm| Number of Boards
Required
---|---|---|---
No Gap| 20mm| 40mm| No Gap| 20mm| 40mm
D| 1350| 1230| 1130| 50| 13| 10| 8
1450| 1350| 1270| 50| 14| 11| 9
1550| 1470| 1410| 50| 15| 12| 10
1650| 1590| 1550| 50| 16| 13| 11
1750| 1710| 1690| 50| 17| 14| 12
Bolt-down post for 1.8m high fence. Code: 76PB7518B.
Concrete-in post for 1.8m high fence. Code: 76PC7518B.
Please note: Post-centre measurements are shown as a guide only. Whilst we do our best to advise and guide, it remains the responsibility of the installer to ensure the final installation complies with any current building regulations and is securely installed. As we have no knowledge of the location, ground type, or layout of your system, we would always advise customers to consider these factors and adjust as appropriate.
T 01708 25 35 45
E [email protected]
W www.fhbrundle.co.uk
F.H. Brundle 24-36 Lamson Road, Ferry Lane North,
Rainham, Essex RM13 9YY
Feb 20 – Version 1