CAPOXO H06 Wireless Earbuds User Manual
- June 3, 2024
- CAPOXO
Table of Contents
H06 Wireless Earbuds
User Manual
H06 Wireless Earbuds
Customar Service
Email: aftersale@capoxo.store
**** WhatsApp: (+86) 139 2349 0475
Web: www.capoxo.store
Packing List
Overview
Note: Please remove protective films of the LED power display screen and charging point before using it.
Specifications
Earbud (each)
- Model Name: H06
- Bluetooth Version: V5.3
- Battery Capacity: 35mAh
- Charging Time: about 1.51-1
- Supports: A2DP, HFP, HSP, AVRCP
- Size/Weight: 33.1’17.5’17.7mm/3.6g
- Transmission Rang: 39 feet(without obstacle)
Charging Case
- Charging Port: Type-C
- Battery Capacity : 500mAh
- Charging Time: about 2H
- Size/Weight: 53.5’50’28.5mm/45.5g
Power On/Off
Auto Power On
The earbuds will turn on automatically when you open the charging case.
Auto
Power Off
Put the earbuds back into the charging case and close the case, the earbuds
will turn off automatically and enter charging mode.
Manually
Power On
If the earbuds are not in the case and power off, press & hold them about 2
seconds, light on earbuds will flash blue and then them will power on.
Manually
Power Off
Press & hold the earbuds about 5 seconds, light on earbuds will flash red and
then them will power off.
Bluetooth Connection
Prior to first use (or not in use for long time), please fully charge both
earbuds and charging case.
First Time Pairing
Step 1 – The twin earbuds will automatically power on and enter pairing
mode when you open the charging case. At this time, led indicator of master
earbud will flash Blue & Red light alternately, and the vice earbud led
indicator flashes Blue light 2 times every 2 seconds.
Step 2 -Activate the Bluetooth setting on your phone, search and connect
“H06”.
Once connected, the led light of both earbuds goes off.
Note:
If the earbuds are not connected to your device over 5 minutes, the earbuds
will power off automatically.
For Second Time Use
If the earbuds have already connected with your device, and the Bluetooth
setting of this device is on, in the second time using, when you take out the
earbuds from the charging case, they will connect with your device
automatically.
Pair with Other Device
H06 Earbuds have memory function, they usually auto connect with the last
paired device.
Thus, if you want to pair them with other device, you should disconnect
“1-106” from the last paired device, AND forget the pairing record on the last
device.
Then try to connect it to a new device, it should work properly.
Mono Mode (Only Left/Right Earbud is being Used)
You can use one earbud alone, leave another earbud in the charging case.
- When in Dual mode, put one earbud into the charging case and close the case.
- Turn on the Bluetooth setting on your phone, then search & connect “H06” on your device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>