CAPOXO X19 Wireless Earphone with Charging Case User Manual
- June 10, 2024
- CAPOXO
Table of Contents
X19 Wireless Earphone with Charging Case
User Manual
X19 Wireless Earphone with Charging Case
Customer Service
Email:support@capoxo.store
Phone: 857-887-2857 (Mon. – Fri.,
11am – 8pm EDT)
Web:www.capoxo.store
Packing List
Product Overview
Note: Please remove protective films of earphone’s charging point before using it.
Product Specification
- Model Name: X19
- Bluetooth Version: V5.3
- Support: AAC/A2DP/HFP/HSP/AVRCP
- Transmission Range: 33 feet(without obstacle)
- Charging Port: Type-C
- Wireless Charging Supported: Yes(charging pad not included)
- Charging Time: about 2H
- Battery of each Earbud: 50mAh
- Battery of Charging Case: 600mAh
Caution
- Please keep the protective film torn off before use, otherwise the headphone will not be able to start and charge.
- Put on and twist to adjust to the most comfortable angle.
- Please clean the magnet charging contact on earbud and charging pin on the charging case with alcohol wipes if the headphones can’t be charged.
- Please clean the protective grille of both earbuds if the sound becomes low.
Earbuds Charging
To Charge Earbuds
Insert the Earbuds into the charging case properly, they will power off and
get charged automatically.
Low Battery Alarm
When the battery is less than 10%（and the voltage is lower than 3.4V), a
prompt voice “Please charge” will be advised, announce once every 5 minutes
and 5 times in total, and then the earbuds will power off as normal.
Charging Case Charging
(There is a Type-C charging cable included in the packing box.)
Type-C Charging
Use the provided Type-C cable with a 5V/1A adapter(NOT Included) to charge the
charging case.
Wireless Charging
Just put the charging case on a wireless charging pad (NOT Included) to charge
your charging case easily.
If the charging case doesn’t start to charge, please try to reposition it.
(* We recommend you to use wireless charging pad with Ql certificate.)
How to power on/off & pair?
Automatically Power on/off & Pairing
(Make sure the earbuds and charging case have power.)
-
Take out earbuds from the charging case, the earbuds will auto power on and enter pairing mode.
-
For first time pairing: Activate Bluetooth setting on your phone, search and connect ”X19”.
For the second time use, when you take out the earbuds from the charging case, they will connect to your device automatically.
Note: If the earbuds are not connected to your device over 5
minutes, the earbuds will power off automatically. -
Put the earbuds back into the charging case, the earbuds will disconnect & power off automatically.
Manually Power on/off
- Press & hold both earbuds’ (L & R) MFB button for about 2 secs, earbud’s LED light flashes red and green alternately, then turn off, which means the earbud turns on and is ready to pair.
- In non-music mode, press & hold either earbud’s MFB button (L/R) for about 5 secs, both earbuds will turn off at the same time with a prompt sound “power off”.
Pair with Other Device
X19 Sports Headphones have memory connect function, they always auto connect
to the last paired device.
Thus, if you want to pair them with other device, you should disconnected
“X19” from the last paired device, then search and connect “X19” on your new
device, it will work properly.
Single Mode
You can leave one earbud in the charging case and use one earbud alone.
- Only take one earbud out of the charging case, then search & connect “X19” on your device.
- When in Dual mode, put one earbud into the charging case.
Factory Restore Setting
When should I reset?
- When only one side play music
- When you can’t find “X19” on your device
- Occur connection issues.
How to reset?
- Delete all “X19” on your phone and deactive the bluetooth setting.
- Put the two earbuds in the charging case, keep them in the charging statu.
- Long press the Reset Button on the charging case for about 10s, the LED display flash 3 times and the earbuds flash red and green alternately, which means both earbuds have reset completely.
- Now, pick up the earbuds to turn them on, activate the bluetooth setting on your device and select “X19” to connect, it should work properly.
If not, please put the earbuds back to the charging case and repeat the steps above.
Multi-function Operations
For Music
| Click MFB Button Once on L/R Earbud
---|---
| Long Press “+” Button on L/R Earbud
| Long Press “-” Button on L/R Earbud
| Click “+” Button Once on L/R Earbud
| Click “-” Button Once on L/R Earbud
For Call
| Click MFB Button Once on L/R Earbud
---|---
| Long Press MFB Button 2s on L/R Earbud
Voice Assistance
(Non-Playing and Non-Calling)
| Double-click MFB Button on L/R Earbud
---|---
Photo/Video shooting
(Non-Playing and Non-Calling)
| Photo shooting | Click “+”/“-” Once on L/R Earbud |
|---|---|
| Start Video shooting | Click “+”/“-” Once on L/R Earbud |
| End Video shooting | Click “+”/“-” Once on L/R Earbud |
Note: The X19 uses the most advanced chip to achieve single-ear control of all functions. Whether you’re using a single earbud (mono mode) or two earbuds at the same time, no matter which one you use, you can always control all functions from one earbud.
How to sync volume on Android?
To protect users from potential hearing damage, Android’s limit on max volume
is quite low for Bluetooth audio devices. If you feel the volume is too low,
please access developer options and enable absolute volume, so you ‘ll able to
max the volume at your own volition and to the full capabilities of your
Bluetooth earphones.
(Scan this QR code to watch a video to learn more details.)
Find Build Number Firstly
Android 4.1 and lower: the Developer options screen is available by default.
Android 4.2 and higher: the Developer options in Android phones
are hidden, you must enable this screen through Build Number.
Android 7.1 and lower: Setting > About phone > Build Number
Android 8.0.0 and Android 8.1.0: Settings > System > About Phone > Build
Number
Android 9 and higher: Settings > About Phone > Build Number
Enable Developer Options
Locate the Build number and tap it about 7 times in succession to enable
Developer options. You may also have to tap in your PIN for verification. Once
developer options are activated, you will see a message that reads “You are
now a developer”.
Go back to the Settings pane, search Developer options as an entry. At the top
of the Developer options screen, you can toggle the options as figure 1.
Enable Absolute Volume
Scroll down until you reach the Networking section.Once there, enable (toggle
ON) the absolute volume option as figure 2.
Note: These options in the figures may be different from the device
you’re using.Typically, the choices depend on the type and model of the device
you are working with.
FCC Caution
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
mustaccept any interference received, including interference that may cause
undesired operation.
| 
support@capoxo.store
---|---
Thank you for purchasing the authentic product.
For more newer products, parts and accessories, please visit:
www.capoxo.store
For any assistance please contact Email:
support@capoxo.store
Documents / Resources
|
CAPOXO X19 Wireless Earphone with Charging
Case
[pdf] User Manual
B0C4VB1HG3, B0BYD6GPF1, X19-D, X19, Wireless Earphone with Charging Case, X19
Wireless Earphone with Charging Case, X19 Wireless Earphone, Wireless
Earphone, Earphone
---|---