Capoxo N7 True Wireless Earbuds User Manual

June 4, 2024
CAPOXO

Capoxo N7 True Wireless Earbuds

CUSTOMER SERVICE

Email:service@capoxo.store
whatsApp: (+86) 1392 3490 475
Web: www.capoxo.store  

PACKING LIST

Charging Case x1

| Earbuds x1 Pair
---|---
Type-C Cable x1|

User Manual x1

PRODUCT OVERVIEW

  • Please kindly note that the wireless charging area is on the back of the charging case

FIRST-TIME USE

  • Prior to first use, please remove the blue insulation sticker.
  • Fully charge both earbuds and charging case.
  • Keep the charging port dry before charging.
  • Use the provided Type-C charging cable, or place the charging case on a wireless charger to get charge.

WARNINGS

  • Keep away from liquids and extreme heat.
  • Keep the earbuds out of children’s reach.
  • Do not throw and drop the earbuds to avoid damage.
  • Do not disassemble the earbuds, or make any modifications to the structure or any part of it.
  • Please charge with a rated voltage charger.
  • Low Battery Warning :
    Earbud LED Red light flashes once every 5 secs.

CHARGING CASE

Battery indicator of Charging Case

The display will light up to show the remaining power of charging case when you open (or close) the lid, then go off after 8 secs. The number will flash when being charged, and will be “100 ” when fully charged and stay on until the power supply cut off.

 Battery Indicator of Earbuds

Put the earbuds back into the box to charge the earbuds. The battery icons will flash when charging, will turn off after fully charged.

  • Features with NTC tempera control protection, N7 earbuds will not charge if the temperature reaches 45 degrees or higher. (Charging case will automatically protect themselves in that case.) It is recommended to stop charging (or disconnect wireless charging) firstly, recharge after the temperature drops below 45 degrees.
Wireless Charging Supported

We recommend you to use wireless charging pad (not included) with QI certificate.

POWER ON/OFF

Automatically Power On/Off

Open the lid of the charging case and the earbuds will power on automatically. Put the earbuds into the charging case and close the lid, the earbuds will power off automatically.

 Manually Power On

Press & hold both earbuds for 2 secs, it will flash Blue light and then power on.

Manually Power Off

Press & hold either earbud for 5 secs, it will flash Red light and then power off.(Non music mode)

Note: The earbuds will automatically power off if there is no devices connected within 5 mins.

BLUETOOTH CONNECTION

Step 1
Open the lid of charging case, two earbuds will automatically power on and enter pairing mode.
Step 2
Activate Bluetooth setting on your phone, search and connect “NT’.

SINGLE MODE

  • When on dual mode, put one earbud into the charging case.
  • Only take one earbud out of the charging case and connect it.

PAIR WITH OTHER DEVICE

N7 Wireless Earbuds has memory function, it usually auto connects with the last paired device.
Thus, if you want to pair them with other device, you should disconnect “NT’ from the last paired device, AND forget the pairing record on the last device.
Then try to connect it to a new device, it should work properly.

FACTORY RESTORE SETTING

When should I reset?

When only one side play music.
When you can’t use the two earbuds together.
When both earbuds fail to pair with each other or occur connection related issues.

How to reset?
  • Delete all “N7′ from the Bluetooth menu on your phones and deactivate the bluetoth setting.
  • Press & hold either earbud for 5 secs, it will flash Red light and then power off.
  • Press & hold both earbuds 8 secs simultaneously to clean the pairingrecord with the last paired device.(* Both earbuds will flash Red & Blue light 3 secs, then turn to Red light and stay on for 1 sec then go off.)
  • Put the earbuds back into charging case and close the lid.
  • Now open the charging case and turn on the Bluetooth on your device, search and connect ‘ N7’, they should workprperly.
    (* If it still doesn’t work, please repeat the steps to try again.)

MULTI-FUNCTION OPERATIONS

Incoming Call

Voice Assistance

Note: in standby/ play mode

Music Mode

Note: 1 – Prompt sound “Du” will be produced when the volume reach minimum or maximum level.

2 – For Android user, please enable “Absolute Volume”/”Media Volume Sync” in your phone settings”, otherwise the volume on headphones will not be synchronized with your Android phone. Scan this QR code to watch a video to learn more details.

SPECIFICATIONS

  • Model Name: N7
  • Bluetooth Version: VS.3
  • Support: AVRCP/HFP/HSP/A2DP/SBC/AAC
  • Transmission Range: 33feet (without obstacle)
  • Music Time: 8H
  • Phone Call Time: 6H
  • Charging Time: about 2H
  • Headphones Battery Capacity: 45mAh
  • Charging Case Battery Capacity: 400mAh
  • LED Power Display: Yes
  • Wireless Charging: Yes
  • Charging Port: Type-C

Q&A

Q: Why does the music cut in and out sometimes?
A: 1- Please make sure there is no obstacle between the earbuds and your device.
2- Please make sure there is no Microwave oven/Wifi transmitter around you, which are more likely to produce electromagnetic interference and result in signal interruption.
Note: Keep the device and the earbuds as close as possible to ensure a more stable Bluetooth connection.

Q: What should I do if the Earbuds stop charging?
A: 1- We advise you to charge the earbuds by using the supplied original charging cable.
2- Please make sure the charging pins and charging points are clean & dry before charging.
3- Please make sure the earbuds battery was run out if sometimes it can’t be charged properly.

Q: How to contact CAPOXO Customer service?
A:
Email: service@capoxo.store
WhatsApp: +86 1392 3490 475
Web: www.capoxo.store 

Thank you very much for choosing CAPOXO!
If there is any issue with your N7, please don’t hesitate to contact us, we will reply within 24 hours and solve your problem 100%.

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals