GEKRONE T190 Bluetooth Fingerprint Lock Instruction Manual

T190 Bluetooth Fingerprint Lock
Instruction Manual

Function

1. Bluelooth unlock on phone
2. Remote Distribution of electronic keys
3. password unlock
4. Fingerprint unlock
5. Lock picking records Surveillance

Performance parameter

Bluetooth Standard:Rluctooth4.1BLE
Supported Cell phone system: Androld4.3/1057.01a I:
Power supply mode:4 Alkali-saving dry cel1U.ow Electricity alarm voltage:4.8V Voltage range: 4.5 0V1.Standby Current:65 microamperes
Operating Current: Less than 200 mock-picking time: 1.5 s
Operating temperature range:-20-70 touch key Types: Capacities touch key Number of passwords: Custom and permanent passwords:I50 Other dynamic passwords:1541
Lock pick mode: APP, passwords, fingerprints, mechanical keys Motor interface output voltage: Ratter voltage reduction.3% Fingerprint head type: Semiconductor fingerprint  head Fingerprint capacity:50 fingerprints
False Accept Rate:<0.001%Walse Reject Rate,:” 1.05%

Open lock

Verify success→green light, and “drip” a voice.
Failure to verify→red light, and a continuous urgent: Drip, drip, drip”, nice

OFF Lock

After the luck is opened, the lock is closed by 5.S.

Low Electricity Quantity Reminder

When the batten is low, after the success of the lock will be issued a continuous rapid: Di, di, di”voice.”. There is a battery indicator on the phone APP, and a low battery indicator appears when the phone is unlocked using Ithietooth. Can Still Open the luck 100 times after appearing the low electricity prompt. Pie ase replace the batteries to avoid affecting the normal use

Fingerprint setup and user management

1. Search for the “TTIOCK” APP on your phone, download it and open it on your phone.

2. Open the phone Bluetooth, in the “lock all” APP. Click the ” number, select the “locks, touch wake up the door lock, the phone will jump out of the door lock name, click add to bet ome the door lock administrator.

3. You can open the door directly by clicking on the”unlock icon”.

4. Click on the “fingerprint icon” and click on the option in the upper right corner, you can add fingerprints, according to the screen display operation.

5. Click “send the key” and ” grant administrator” to add users and administrators, according to the screen prompt for action.

Set passwords and delete passwords

Click “get password’ on the APP, select the password type: custom selection validity period, dick to set the password to enter the need to add the password. , ac cording to the screen display operation. Click ‘password management on the APP, click the password to be deleted, click delete, according to the screen operation.

Remove fingerprints and devices

1. Click on the fingerprint on the APP, Click on the fingerprint to be deleted, click on delete according to the prompt on the screen.

2. Select the lock in the APP that requires you to remove the phone’s administrator, click filings, and click delete. Follow the instructions on the screen.

Check Lock picking records

Select the lock on the APP, Click on the operating record to view, click on the APP a fingerprint, Password, click on the operating record, view the fingerprint and Password of all records.

Normally open mode switch

After pressing, the handle of the normally open key loosens after 1 second. long ‘drops’ Which is set as normally open mode. repeat operation can be switched into automatic locking or normally open mode again.

Restore factory settings

Four seconds after long-pressing the reset button on the lock, two clicks are heard. The lock has been reset to factory settings, and all fingerprints, passwords, and phone administrators are cleared out.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the  user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>