CAPOXO X19 Wireless Earbuds Bluetooth Headphones User Manual

June 14, 2024
CAPOXO

USER MANUAL
X19

X19 Wireless Earbuds Bluetooth Headphones


Customer Service
** Email: support@capoxo.store
**
Phone: 857-663-7819 (Mon. – Fri., 11am – 8pm EDT)
** Web: www.capoxo.store**

Packing List

| |
---|---|---
Charging Case ×1| Earphones ×1 Pair (L&R)| Ear Tips ×4 Pairs
| |
Type-C Charging Cable ×1| User Manual ×1|

Product Overview

CAPOXO X19 Wireless Earbuds Bluetooth Headphones -
Overview

Note: Please remove protective films of earphone’s charging point before using it.

Product Specification

  • Model Name: X19
  • Bluetooth Version: V5.3
  • Support: AAC/A2DP/HFP/HSP/AVRCP
  • Transmission Range: 33 feet(without obstacle)
  • Charging Port: Type-C
  • Wireless Charging Supported: Yes(charging pad not included)
  • Charging Time: about 2H
  • Battery of each Earbud: 50mAh
  • Battery of Charging Case: 600mAh

Caution

  1. Please keep the protective film torn off before use, otherwise the headphone will not be able to start and charge.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - protective film
  2. Put on and twist to adjust to the most comfortable angle.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - comfortable angle
  3. Please clean the magnet charging contact on earbud and charging pin on the charging case with alcohol wipes if the headphones can’t be charged.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Charging Contact
  4. Please clean the protective grille of both earbuds if the sound becomes low.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Protective Grille* To make sound louder

Earbuds Charging

To Charge Earbuds
Insert the Earbuds into the charging case properly, they will power off and get charged automatically.
When being charged, the display icons will flash up and down, and the earbud’s LED light will flash red;

When fully charged, the display icons and the earbuds’ LED red light will turn off.
Low Battery Alarm
When the battery is less than 10%(and the voltage is lower than 3.4V), a prompt voice “Please charge” will be advised, announce once every 5 minutes and 5 times in total, and then the earbuds will power off as normal.

Charging Case Charging

(There is a Type-C charging cable included in the packing box.)
Type-C Charging
Use the provided Type-C cable with a 5V/1A adapter(NOT Included) to charge the charging case.

CAPOXO X19 Wireless Earbuds Bluetooth Headphones -
Charging

During charging, the charging case power display will show the battery in real time. The number will be displayed as “100” when fully charged.
Wireless Charging
Just put the charging case on a wireless charging pad (NOT Included) to charge your charging case easily.
If the charging case doesn’t start to charge, please try to reposition it.
(* We recommend you to use wireless charging pad with Ql certificate.)

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Wireless
Charging

How to power on/off & pair?

Automatically Power on/off & Pairing
(Make sure the earbuds and charging case have power.)

  1. Take out earbuds from the charging case, the earbuds will auto power on and enter pairing mode.

  2. For first time pairing: Activate Bluetooth setting on your phone, search and connect ”X19”.
    For the second time use, when you take out the earbuds from the charging case, they will connect to your device automatically.CAPOXO X19 Wireless Earbuds
Bluetooth Headphones - charging case 2 Note: If the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically.

  3. Put the earbuds back into the charging case, the earbuds will disconnect & power off automatically.

Manually Power on/off

  1. Press & hold both earbuds’ (L & R) MFB button for about 2 secs, earbud’s LED light flashes red and green alternately, then turn off, which means the earbud turns on and is ready to pair.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - earbud turns
  2. In non-music mode, press & hold either earbud’s MFB button (L/R) for about 5 secs, both earbuds will turn off at the same time with a prompt sound “power off”.CAPOXO X19 Wireless Earbuds Bluetooth Headphones - prompt sound

Pair with Other Device
X19 Sports Headphones have memory connect function, they always auto connect to the last paired device.
Thus, if you want to pair them with other device, you should disconnected “X19” from the last paired device, then search and connect “X19” on your new device, it will work properly.
Single Mode
You can leave one earbud in the charging case and use one earbud alone.

  • Only take one earbud out of the charging case, then search & connect “X19” on your device.
  • When in Dual mode, put one earbud into the charging case.

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Single
Mode

Factory Restore Setting

When should I reset?

  • When only one side play music
  • When you can’t find “X19” on your device
  • Occur connection issues.

How to reset?

  1. Delete all “X19” on your phone and deactive the bluetooth setting.
  2. Put the two earbuds in the charging case, keep them in the charging statu.
  3. Long press the Reset Button on the charging case for about 10s, the LED display flash 3 times and the earbuds flash red and green alternately, which means both earbuds have reset completely.
  4. Now, pick up the earbuds to turn them on, activate the bluetooth setting on your device and select “X19” to connect, it should work properly.
    If not, please put the earbuds back to the charging case and repeat the steps above.

Multi-function Operations

CAPOXO X19 Wireless Earbuds Bluetooth Headphones -
function

For Music
Play/Pause …….. Click MFB Button Once on L/R Earbud
Next Track …….. Long Press “+” Button on L/R Earbud
Last Song ………. Long Press “-” Button on L/R Earbud
Volume+ ……….. Click “+” Button Once on L/R Earbud
Volume- ………… Click “-” Button Once on L/R Earbud
For Call
Answer/End Call …….. Click MFB Button Once on L/R Earbud
Reject Call ………………. Long Press MFB Button 2s on L/R Earbud
Voice Assistance
(Non-Playing and Non-Calling)
Siri ………….. Double-click MFB Button on L/R Earbud
Photo/Video shooting
(Non-Playing and Non-Calling)
Photo shooting …………. Click “+”/“-” Once on L/R Earbud
Start Video shooting ….. Click “+”/“-” Once on L/R Earbud
End Video shooting …… Click “+”/“-” Once on L/R Earbud
Note: The X19 uses the most advanced chip to achieve single-ear control of all functions. Whether you’re using a single earbud (mono mode) or two earbuds at the same time, no matter which one you use, you can always control all functions from one earbud.

How to sync volume on Android?

To protect users from potential hearing damage, Android’s limit on max volume is quite low for Bluetooth audio devices. If you feel the volume is too low, please access developer options and enable absolute volume, so you ‘ll able to max the volume at your own volition and to the full capabilities of your Bluetooth earphones. (Scan this QR code to watch a video to learn more details.)

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - QR
Code https://youtu.be/hLtniUIi2No

Find Build Number Firstly
Android 4.1 and lower: the Developer options screen is available by default.
Android 4.2 and higher: the Developer options in Android phones are hidden, you must enable this screen through Build Number.
Android 7.1 and lower: Setting > About phone > Build Number
Android 8.0.0 and Android 8.1.0: Settings > System > About Phone > Build Number
Android 9 and higher: Settings > About Phone > Build Number
Enable Developer Options
Locate the Build number and tap it about 7 times in succession to enable Developer options. You may also have to tap in your PIN for verification. Once developer options are activated, you will see a message that reads “You are now a developer”.
Go back to the Settings pane, search Developer options as an entry. At the top of the Developer options screen, you can toggle the options as figure 1.

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Developer
Option

Enable Absolute Volume
Scroll down until you reach the Networking section.Once there, enable (toggle ON) the absolute volume option as figure 2.
Note: These options in the figures may be different from the device you’re using.Typically, the choices depend on the type and model of the device you are working with.

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - Absolute
Volume

FCC Caution

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device mustaccept any interference received, including interference that may cause undesired operation.

CAPOXO X19 Wireless Earbuds Bluetooth Headphones - QR Code
2| CAPOXO X19 Wireless Earbuds
Bluetooth Headphones - QR Code 3
---|---
www.capoxo.store| support@capoxo.store

Thank you for purchasing the authentic product.
For more newer products, parts and accessories, please visit: www.capoxo.store
For any assistance please contact Email: support@capoxo.store

CAPOXO X19 Wireless Earbuds Bluetooth Headphones -
Symbol

Documents / Resources

| CAPOXO X19 Wireless Earbuds Bluetooth Headphones [pdf] User Manual
X19 Wireless Earbuds Bluetooth Headphones, X19, Wireless Earbuds Bluetooth Headphones, Earbuds Bluetooth Headphones, Bluetooth Headphones, Headphones
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals