CAPOXO D8 Earbuds User Manual

CAPOXO D8 Earbuds

Customer Service

• Phone Call : 857-575-1858
• Email : amz@capoxo.store
• Web : www.capoxo.store

Packing List

Overview

Note : Please REMOVE protective films of the LED power display screen and charaina point before using them

Product Specification

1. Model Name : D8
2. Bluetooth Version : V5.3
3. Supports : A2DP, HFP, HSP, AVRCP
4. Earbuds Size/Weight : 483827mm/9g
5. Charging Case Size/Weight : 1006341mm/127 g
6. Charging Port : Type-C
7. Standby Time : 140H
8. Earbud Battery : 70mAh
9. Charging Case Battery : 2600mAh
10. Transmission Rang : 33 feet(without obstacle)

Power On/Off

Auto Power On
Take the earbuds out from the charging case, they will turn on automatically.

Auto Power Off
Put the earbuds back into the charging case, they will disconnect & turn off automatically.

Manually Power On
If the earbuds are out of the charging case and power off, then press & hold them for 2s, they will power on.

Manually Power Off
In non- music mode or standby mode, press & hold either earbud for 5s, both earbuds will power off at the same time.

Bluetooth Connection

Prior to first use (or not in use for long time), please fully charge both earbuds and charging case.

First Time Pairing

1. Step 1 Take twin earbuds out from charging case, they will automatically power on and enter pairing mode. At this time, led indicator of master earbud will flash Blue & Red light alternately, and the vice earbud led indicator flashes Blue 2 times every 2s.
2. Step 2 – Activate the Bluetooth setting on your phone, search and connect “D8”. Once connected, the led light of both earbuds goes off.

Once connected, the led light of both earbuds goes off.

Note : If the earbuds are not connected to your device over 5 minutes, the earbuds will power off automatically.

For Second Time Use
If the earbuds have already connected with your device, and the Bluetooth setting of this device is on, in the second time using, when you take out the earbuds from the charging case, they will connect with your device automatically.

Pair with Other Device
D8 sports earbuds have memory function, they usually auto connect with the last paired device. Thus, if you want to pair them with other device, you should disconnect “D8” from the last paired device, AND forget the pairing record on the last device. Then try to connect it to a new device, it should work properly.

Mono Mode (Only Left/Right Earbud is being Used)
You can use one earbud alone, leave another earbud in the charging case.

• When in Dual mode, put one earbud into the charging case.
• Or only take one earbud out of the charging case, then search & connect “D8” on your device.

Factory Restore Settings

When should I reset?

1. Only one earbud plays music.
2. Both earbuds can not work with together.
3. Occur connection issues.

Follow Steps Below to Reset Earbuds

1. Step 1 : Delete the pairing name “D8” on your phone and deactive the Bluetooth setting of all devices near by the earbuds.
2. Step 2 : Put the two earbuds in the charging case, keep them in the charging state.
3. Step 3 : Press the MB button for 8 seconds, then the earbud will flash red & blue light alternately for 3 seconds, which means the both earbuds have reset completely.
4. Step 4 : Now, pick up the earbuds to turn them on, activate the Bluetooth setting on your phone search and select “D8” to connect, it should work properly. If not, please put the earbuds back to the charging case and repeat the steps above.

Note : After resetting, the pairing record between the earbuds and all your devices will be cleared. In case there is any unsuccessful message in your devices. Please consider to delete the historical record of “D8” and try the pairing process again.

Earbuds Charging

To Charge Earbuds
Insert the Earbuds into charging case properly, they will power off & get charged.

( Earbud’s LED light: Red light up means “being charged”, Red light off means “fully charged”.)

Low Battery Alarm
When the battery is less than 10% (and the voltage is lower than 3.4V), a prompt voice “Please charge” will be advised, announce once every 5 minutes and 5 times in total, and then the earbuds will power off as normal.

Tips: If the earbuds don’t charge or even can’t turn on, that may because there is oxidized layer or something else on the charging connector or charging pin. You can solve this problem by cleaning the magnet connector on the earbuds and charging pin on the charging case with alcohol wipes.

Charging Case Charging

Type-C Charging
There is a Type-C charging cable in the small black paper box inside the packing box. Please use the provided Type-C cable with a 5V/1A adapter(not included) to charge the charging case.

During charging, the charging case power display will show the battery in real time. The number will be displayed as 100 when fully charged.

Wireless Charging
Easy to charge your charging case without cables, just put the charging case on a wireless charging pad. If the charging case doesn’t start to charge, please try to reposition it. (Wireless Charging Pad Not Included)

To Charge Your Phone
Fully charged charging case supports charging your mobile phone, connect it to your mobile phone with your charging cable.

Multi-Function Operations

For Call

• Answer Call: Click Once
• End Call : Click Once
• Reject Call : Long Press 25

Voice Assistant

Voice assistants : Quick Triple-Click

Note : Must in non-music mode or standby mode.

For Music
[Functions on “R” Earbud]

• Play/Pause : Click Once
• Next Track : Quick Double-Click
• Volume + : Long Press & Hold

Note : In mono mode, “R” earbud only supports next song and volume +. You have togo back to the previous song by your phone.

[Functions on “L” Earbud]

• Play/Pause: Click Once
• Previous Track : Quick Double-Click
• Volume -: Long Press & Hold

Note : In mono mode, “L” earbud only supports next song and volume – You have to go back to the previous song by your phone.

How to Wear the Earbuds Correctly
Choose best-fit ear tips, gently push the earbuds into your ears and adjust them to get a comfortable fit

Safety Attention

1. Do not use the earbuds while driving a car, operating machinery or performing other activities that require hearing surrounding sounds.
2. Using earbuds at high to moderate volumes for extended periods of time will result in permanent hearing damage. It is advised you keep volume levels moderate to low at times for your safety.
3. Please avoid use in thundering and raining days to prevent damage or electrical shock.
4. Please keep the earbuds out of extreme heat or humidity, do not use any corrosive cleaner/oil to clean the earbuds.
5. Please avoid disassemble/reassemble the product in case of failure or fire accident.
6. Please keep beyond the reach of kids or pets.
7. Please stop using the device if it causes any discomfort or pain.
8. As the Bluetooth signal cannot transmit in water it is not suitable for swimming or diving. If submerged in water, do not turn the earbuds on until completely dried.

How to Place the Earbuds

How to Sync Volume on Android
To protect users from potential hearing damage, Android’s limit on max volume is quite low for Bluetooth audio devices. If you feel the volume is too low, please access developer options and enable absolute volume, so you’ll be able to max the volume at your own volition and to the full capabilities of your Bluetooth earbuds. (Please scan this QR code to watch a video to learn more details.)

Find Build Number Firstly

1. Android 4.1 and lower : the Developer options screen is available by default.
2. Android 4.2 and higher : the Developer options in Android phones are hidden, you must enable this screen through Build Number.
3. Android 7.1 and lower : Settings > About Phone > Build Number
4. Android 8.0.0 and Android 8.1.0 : Settings > System > About Phone > Build Number

Enable Developer Options
Locate the Build number and tap it about 7 times in succession to enable Developer options. You may also have to tap in your PIN for verification. Once developer options are activated, you will see a message that reads “You are now a developer”

Go back to the Settings pane, search Developer options as an entry. At the top of the Developer options screen, you can toggle the options as figure 1.

Enable Absolute Volume
Scroll down until you reach the Networking section. Once there, enable (toggle ON) the absolute volume option as figure 2.

Note : These options in the figures may be different from the device you’re using. Typically, the choices depend on the type and model of the device you are working with.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>