xtrom XA2030 30W Volt Charger User Manual
- June 3, 2024
- xtrom
Table of Contents
XA2030 VOLT 30W
User Manual
SPECIFICATIONS
| 1x USB QuickCharge 3.0 18W
1x USB-C Power Delivery 30W
---|---
| AC 100V-240V; 50-60Hz; 0.75A Max
| 82x28x45 mm
| 60 grams
| 1x Manual
PRODUCT OVERVIEW
- In/Output AC Connection
- USB QC 3.0 18W
- USB-C PD 30W
When using all outputs:
- 15W
- 15W
CHARGING YOUR DEVICE
3A Connect the adapter to the wall socket.
3B Connect one end of the charging cable to the output of the adapter.
3C Connect the other end to the input of your device. Charging will start
automatically.
IN THE BOX
XA2030 Volt Fast
- Charger 30W
- Manual
RECYCLING
When recycling this product, please follow WEEE battery recycling
procedures. Contact your local recycling organization for more information.
XTORM SAFETY CHECK
| 1. TEMPERATURE CONTROL
Provided with a temperature control chip that prevents overheating.
---|---
| 2. OVERLOAD PROTECTION
Protects both the internal battery as well as the battery of the attached
device from overcharging.
| 3. SECURED POWER MANAGEMENT
Automatically picks the correct charging speed and efficiently devides power
between attached devices.
| 4. SHORT CIRCUIT PROTECTION
Breaks the circuit automatically when an overcurrent is detected. This
protects the Xtorm chargerand your device from short circuit damage.
| 5. A-CLASS BATTERY CELLS
We only use the best battery cells that provide the fast charging you need and
meet all safety requirements.
| 6. HIGH EFFICIENCY
Our power products are built to power your device as efficient as possible.
This ensures the least possible loss of energy during the charging process.
WARNINGS
Warnings
Don’t drop, dissemble or attempt to repair the charger by yourself.
Avoid exposure to water or high humidity. Don’t expose to any heat source.
Keep out of reach of children. Don’t use in the presence of flammable gas. The
warranty will lapse in the event of improper use. Telco Accessories has tested
the product in a test environment.
All statements/declarations made by Telco Accessories about the (operation) of
the product are based on the results obtained from such tests. These
results/statements/declarations cannot be guaranteed, for example in cases of
deviating or injudicious use and/or use in a different environment.
EU DECLARATION OF CONFORMITY
(In accordance with EN ISO/IEC 17050-1)
Declaration number: DOCIP 1738879
Name and address of manufacturer / EU-AR: Telco Accessories BV Hoofdveste 19
3992 DH Houten Netherlands
THIS DECLARATION OF CONFORMITY IS ISSUED UNDER THE SOLE RESPONSIBILITY
OF:
Name and address of manufacturer:| Telco Accessories BV
Hoofdveste 19
3992 DH Houten
Netherlands
---|---
Product identification:| Volt II GaN Wall Charger
XA2030
XA2065
XA2100
XA2140
THE PRODUCTS MENTIONED IN THIS DECLARATION ARE IN CONFORMITY WITH:
EU Community Legislation| Restriction of Hazardous Substances (RoHS) Directive
2011/65/EU [OJEU 1.174/88-110, 01.07.2011] Electromagnetic Compatibility (EMC)
Directive 2014/30/EU [OJEU L96/79-106, 29.03.2014] Ecodesign energy-related
products Directive 2009/125/EC [OJEU L285/10-35, 31.10.2009] Low Voltage
Directive (LVD) 2014/35/EU [OJEU L96/357-374, 29.03.2014]
---|---
Harmonised standards| Safety of electrical equipment
EN 62368-1:2014 + AC:2015-02 + AC:2015-05 + AC:2015-11 + AC:2017-03 + A11:2017
- EN IEC 62368-1:2020 + A11:2020 + AC:2020-05
Electromagnetic Compatibility
(EMC) EN 301 489-34 V1.4.1 + EN 301 489-34 V2.1.1
Restricted substances in electrical products
EN IEC 63000:2018
Ecodesign
EN 50563:2011 + A1:2013 Regulation (EU) 2019/1782 – Ecodesign of External Power Supplies (EPS)
SIGNED FOR AND ON BEHALF OF:
Place and date of issue: Houten, 31 October 2022 Signature: Name, function:
Company name:
Ralph Both, CEO
Telco Accessories BV
HIGHER QUALITY
= LOWER IMPACT
CUSTOMER SUPPORT
support@tag.nl
+31 (0)30 635 4800
TELCO ACCESSORIES GROUP
Hoofdveste 19, 3992DH Houten
The Netherlands
XTORM.EU
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>