Xtrom XP300U Portable Power Station 300Watts Instruction Manual
- June 4, 2024
- xtrom
Table of Contents
Xtrom XP300U Portable Power Station 300Watts
- 78.000mAh Li-ion/ 281Wh
- 240x142x154mm
- 3,3kg
- DC 6.5mm input port
- USB-C PD input
- Output AC
- Output 2x DC 5.5mm
- port 60W (1 V/5A)
- DC 6.5mm input port: 72 (26V max)
- Output 2x DC 5.5mm po : 60W (12V/5A)
- Output Car charger: 120 (12V/10A)
- 2x U5B-A (5V/3.1A)
- 1x USB-A QC 3.0 1BW (5V 3A, 9V/2A, 12V/1.5A)
- 1x In/Output U5B-C PD 60 (5V/3A, 9V2.22A, 12V/1.5A)
- Output AC 300W (220V / 50Hz)
CHARGING FROM WALL CHARGE
Use the included AC charging adapter o connect to the 6.5mm DC input port. (max 72W) You can also connect a use a USB-C P charger to the USB-C port. (max 60W
CHARGING FROM A SOLAR PANEL
Connect your Solar Panel directly to th 6.5mm DC input port. If your solar
panel has an MC4 connect r, please use the adapter cable that is
included
RECHARGING THE POWER STATION
The Power Station is fully charged when the LCD display shows
100%.
How to use this PowerStation
- Press the button on the output you want to use For USB/DC output: Press 1 second For AC output: Press 2 seconds
- The output is working when the green light turns on You can now use this output
Tip:
when not using an output, turn it off to save energy
Use the included AC charging adapter to connect to the 6.5 m DC input port. (max 72W). You can also connect a use a USB-C PD harger to the USB-C port. (max 60W)Recharge the power bank via the DC in just 5.5 hours.Connect your Solar Panel directly to the 6.5mm DC input port. If ur solar panel has an MC4 connector, please use the adapter cable that is incl ded.