reolink Video Doorbell WiFi / PoE User Guide

: June 3, 2024
: reolink

reolink Video Doorbell WiFi / PoE

Technical Support

If you need any technical help, please visit our official support site and contact our support team before returning the products:
https://support.reolink.com.

REOLINK INNOVATION LIMITED FLAT/RM 705 7/F FA YUEN COMMERCIAL BUILDING 75-77 FA YUEN STREET MONG KOK KL HONG KONG

EU REP Product Ident GmbH
Hoferstasse 9B, 71636 Ludwigsburg, Germany
Email: prodsg@libelleconsulting.com

UK REP APEX CE SPECIALISTS LIMITED July 2022
Address.: 89 Princess Street, Manchester, M14HT, UK QSG1_A
Email: info@apex-ce.com 58.03.005.0053

What’s in the Box

reolink-Video-Doorbell-WiFi-PoE-01

NOTE: The Reolink Video Doorbell PoE doesn’t come with a power adapter and power extension cable.

Doorbell Introduction

Video Doorbell PoE

reolink-Video-Doorbell-WiFi-PoE-02

Video Doorbell WiFi

reolink-Video-Doorbell-WiFi-PoE-03

Set up the Doorbell

Set up the Doorbell on Phone

*The Reolink Video Doorbell PoE is taken as an example.

reolink-Video-Doorbell-WiFi-PoE-04

Step 1 Scan to download the Reolink App from the App Store or Google Play Store.
Step 2 Power on the video doorbell with an Ethernet cable.
NOTE: If you’re using the Reolink Video Doorbell WiFi, you need to connect it to the power adapter or your existing doorbell wiring to power it on.
Step 3 Launch the Reolink App. Click the “ + ” button in the top right corner and scan the QR code on the doorbell to add it.
Step 4 Follow the onscreen instructions to finish the initial setup.

Set up the Doorbell on PC (Optional)

Step 1 Download and install the Reolink Client. Go to https://reolink.com > Support > App & Client
Step 2 Power on the video doorbell with an Ethernet cable.
Step 3 Launch the Reolink Client. Click the “ + ” button and input the UID number of the doorbell to add it.
Step 4 Follow the onscreen instructions to finish the initial setup

Set up the Chime

Step 1 Plug in the Chime and press the button on your doorbell.
Step 2 Follow the onscreen instructions to finish the initial setup.

Install the Doorbell

*The Reolink Video Doorbell PoE is taken as an example.

Step 1 Put the mounting hole template on the wall and drill holes as shown.
Step 2 Install the mounting plate using the screws provided through the two holes.
Step 3 Run the Ethernet cable through the mounting plate and attach the doorbell to the plate.
NOTE: If you’re using the Reolink Video Doorbell WiFi, you need to run the power wires through the mounting plate.

If you need to adjust the angle of the doorbell, you can use the wedge provided.

Step 1 Put the mounting hole template on the wall and drill holes as shown.
Step 2 Install the wedge using the screws provided through the two holes.
Step 3 Screw the mounting plate to the wedge.
Step 4 Run the Ethernet cable through the wedge and mounting plate, and attach the doorbell to the plate.

Specification

Hardware Features

Field of View: 140° Horizontal, 98° Vertical, 190° Diagonal
Infrared LED: 2pcs/850nm
Dimension: 133 x 48 x 23mm
Weight: 96g

Notification of Co$mpliance

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Warning Statements

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body.

Simplified EU Declaration of Conformity
Reolink declares that the WiFi camera is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, the PoE camera is in compliance with Directive 2014/30/EU.

Correct Disposal of This Product

This marking indicates that this product should not be disposed with other household wastes.throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.

Limited Warranty

This product comes with a 2-year limited warranty that is valid only if purchased from Reolink Official Store or a Reolink authorized reseller. Learn more:
https://reolink.com/warranty-and-return/.
NOTE: We hope that you enjoy the new purchase. But if you are not satisfied with the product and plan to return, we strongly suggest that you reset the camera to factory default settings before returning.

Terms and Privacy
Use of the product is subject to your agreement to the Terms of Service and Privacy Policy at reolink.com. Keep out of reach of children.

End User License Agreement
By using the Product Software that is embedded on the Reolink product, you agree to the terms of this End User License Agreement (“EULA”) between you and Reolink. Learn more: https://reolink.com/eula/.

ISED Statements
This device contains licenceexempt transmitter(s)/re ceiler(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement for IC
The device has been evaluated to meet general RF exposure requirements.
The device can be used in mobile exposure conditions.
The min separation distance is 20cm.

OPERATING FREQUENCY
(For WiFi Version) (the maximum transmitted power)