Superior Life LHB88UR250DLPS 120 to 277V LED Linear High Bay Luminaire Instruction Manual

: June 3, 2024
: Superior Life

Table of Contents

Superior Life LHB88UR250DLPS 120 to 277V LED Linear High Bay Luminaire
WARNING, CAUTIONS AND OPERATING INSTRUCTIONS
INSTALLATION
CHAIN MOUNT
GENERAL WIRING DIAGRAM
ADDITIONAL MOUNTING OPTIONS
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Superior Life LHB88UR250DLPS 120 to 277V LED Linear High Bay Luminaire

PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the instructions before you install and use the luminaire.

WARNING, CAUTIONS AND OPERATING INSTRUCTIONS

To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions, and other hazards read all warnings and instructions included with and on the fixture box and all fixture labels.
Before installing, servicing, or performing routine maintenance upon this equipment, follow these general precautions.
A qualified licensed electrician should perform commercial installation, service and maintenance of luminaires.
For the installation: If you are unsure about the installation or maintenance of the luminaires, consult a qualified licensed electrician and check your local electrical code.
To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
WARNING: RISK OF FIRE OR ELECTRICAL SHOCK
Turn off electrical power at fuse or circuit breaker box before wiring fixture to the power supply.
Turn off the power when you perform any maintenance.
Verify that supply voltage is correct by comparing it with the luminaire label information.
Make all electrical and grounded connections in accordance with the National Electrical Code and any applicable local code requirements.
All wiring connections should be capped with UL approved wire connectors.
CAUTION: RISK OF INJURY
Avoid direct eye exposure to the light source while it is on.
Account for small parts and destroy packing material, as these may be hazardous to children.
Green ground screw is provided in the proper location. DO NOT RELOCATE.
Minimum 90Â° supply conductors.
Suitable for Dry or Damp locations.

WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.

INSTALLATION

Remove the new LED fixture from packaging and inspect for any damages. Handle new LED fixture with care.
STANDARD CHAIN MOUNT: Install the chain into the provided wire hanger. Secure the other end of the chain to a structure using hardware rated for the load. Install the wire hanger on the side of the top LED channel. Make sure the wiring hangers are fully engaged into the side holes on the top channel (Additional mounting .)
Connect the LED high bay wiring to line voltage wire, black to hot, white to neutral and green
to ground. Use only UL-listed wiring *NOTE: Purple and pink (or gray) wires inside the driver compartment are 0-10V (low voltage) dimming leads. Connect to dimming low-voltage wiring only. If not connecting the fixture to a 0-10V dimming circuit, make sure fixture dimmer leads are capped off separately from each other. Failure to do so make cause improper fixture operation and void the warranty.
Clean all residues/fingerprints from the new LED high bay and lens. Double-check all hanging hardware before moving onto the next installation.

CHAIN MOUNT

$Superior Life LHB88UR250DLPS-120-to-277V LED-Linear-High- Bay-Luminaire-FIG- $1$$

GENERAL WIRING DIAGRAM

$Superior Life LHB88UR250DLPS-120-to-277V LED- Linear-High-Bay-Luminaire-FIG- $2$$

ADDITIONAL MOUNTING OPTIONS

(Sold separately)

CABLE MOUNT $Superior Life LHB88UR250DLPS-120-to-277V LED-Linear-High-Bay- Luminaire-FIG- $3$$

PENDENT MOUNT $Superior Life LHB88UR250DLPS-120-to-277V LED-Linear-High- Bay-Luminaire-FIG- $4$$

TONE-SELECT™ LINEAR HIGH BAY – Field Adjustable CCT (If applicable)

The end users may adjust the color temperature by the slide switch located on the side of the driver box. The switch has 2 positions (left or right), corresponding to 1 of 2 color temperatures (4000K, 5000K).