Superior Life PQL-84229 Led Stadium Lights V2 Lighting and Supplies Installation Guide
- June 3, 2024
- Superior Life
Table of Contents
LED STADIUM LIGHTS V2
INSTALL INSTRUCTIONS
PQL-84229 Led Stadium Lights V2 Lighting and Supplies
PLEASE FIND A QUALIFIED ELECTRICIAN FOR INSTALLATION. Please read the
instructions before you install and use the luminaire.
GENERAL: ALL ELECTRICAL CONNECTIONS MUST BE IN ACCORDANCE WITH LOCAL AND
NATIONAL ELECTRICAL CODE (N.E.C.) STANDARDS. IF YOU ARE UNFAMILIAR WITH PROPER
ELECTRICAL WIRING CONNECTIONS OBTAIN THE SERVICES OF A QUALIFIED ELECTRICIAN.
WARNING – Risk of fire or electric shock. Installation requires knowledge
of luminaires electrical systems. If not qualified, do not attempt
installation; contact a qualified electrician.
WARNING – Risk of fire or electric shock. Install luminaires that have
the construction features and dimensions shown in the photographs and/or
drawings and where the voltage input rating of the does not exceed the voltage
input rating of the luminaire.
WARNING – To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during installation.
Risk of Electric Shock: Disconnect power or circuit breaker before installing
or servicing.
Before installation, please check if the local voltage range corresponds with
the working voltage of the fixture.
If the fixture is damaged, it should be replaced by the supplier, a service
agent or a qualified person.
Do not use where exposed to flame, electric shock, or high vibration.
WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
300W / 400W / 500W / 600W
STEP 1 – Attach glare shield to the luminaire body by using the M5x12mm
screws to lock the shield in place.
STEP 2 – MOUNTING LUMINAIRE
- Place fixture on the mounting surface.
- Insert M20 and M10 bolts into bracket. Tighten the bolts hand tight so luminaire is secured to the mounting surface but still allow adjustment. Do not fully torque down until desired position is set.
- Adjust bracket and fixture vertically, and for Install Method 1 horizontally.
- Fully tighten all bolts to secure fixture. General Wiring Diagram on Page 2.
MOUNTING DIAGRAM
OPTIONAL U-BRACKET WITH SLIP FITTER FOR
300W / 400W / 500W / 600W (Item# 84080, sold separately)
MOUNTING LUMINAIRE
- Secure fixture in U-Bracket.
- Place slip fitter on light pole. Tighten the bolts hand tight so luminaire is secure but allows adjustment.
- Adjust fixture to desired angle.
- Fully tighten all bolts to secure fixture.
General Wiring Diagram on Page 2.
WARNING DISCONNECT POWER BEFORE INSTALLING OR SERVICING.
**750W / 1250W*
STEP 1 – Attach glare shield to the luminaire body by using the M5x12mm
screws to lock the shield in place.
STEP 2 – MOUNTING LUMINAIRE**
- Place fixture on the mounting surface.
- Insert M20 and M10 bolts into bracket. Tighten the bolts hand tight so luminaire is secured to the mounting surface but still allow adjustment. Do not fully torque down until desired position is set.
- Adjust bracket and fixture vertically, and for Install Method 1 horizontally.
- Fully tighten all bolts to secure fixture.
*Note: The 1250W Stadium Light uses an external driver box.
The driver box should be mounted within 85’ of the fixture to prevent voltage loss.
MOUNTING DIAGRAM
GENERAL WIRING DIAGRAM
*Note: For non-dimming applications, cap the purple and gray dimming wires
separately. Failure to do so may cause malfunctioning and void warranty.
Specifications subject to change without notice. Photos and line drawings may
not be to scale and are for general reference only.
PREMIUM QUALITY LIGHTING®
• www.PQLighting.com
© P.Q.L., Inc. • 2285 Ward Avenue
• Simi Valley, CA 93065 • 800-323-8107
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>