Laresar L6 Pro Robot Vacuum Cleaner User Guide
- June 3, 2024
- Laresar
Table of Contents
Laresar L6 Pro Robot Vacuum Cleaner
APP Main Interface Introduction
Machine Working Status
- Working status of machine: You can clearly know the working mode of the Robot Vacuum Cleaner, such as “cleaning, recharging, vacuuming”, etc.
- Position of machine
- Black represents the wall, and gray represents the map area which has been scanned;
- The white line is the cleaned route, the blue line is the cleaning route;
- Green represents the location of the dust collector; blue represents the location of the machine;
- Remaining power
- Cleaned area
- Worked time
Cleaning Mode
AUTO
Automatic cleaning: The default mode is with standard suction power and only vacuum mode. The machine will draw a map of the whole house along the wall edges, and then clean from room to room with “Z” shape.
Room
Room cleaning: After a complete cleaning of the house, the Robot Vacuum Cleaner will automatically divide the rooms, and you can click “Patition editing” to set different clean and mop mode for the different rooms.
Zone
Zone cleaning: You can zoom in on the map and click” Create area” to draw a specific area to clean. And the robot vacuum cleaner will go to the area for cleaning.
Pinn Go
Spot cleaning: In this mode, click on the coordinates of the place to be cleaned, and the robot vacuum cleaner will go to the designated place and clean along the coordinates.
Area setting: You can set the no-mop area, forbidden area, virtual wall by zooming in on the map. The red box represents the forbidden area, and the blue box represents the no-mop area.
Note: The gray area centered on the charging dock cannot be set as a restricted zone.
_ Partition editing: _The set area can be changed: area merging, area division, area naming, custom mode.
Operation of Vacuuming / Moping Function
- Recharge: During the cleaning process, click “Recharge”, and the Robot Vacuum Cleaner will return to charging station to collect dust first, then charge itself.
- Start: Click the”start” button,the Robot Vacuum Cleaner starts to work; click again, the Robot Vacuum Cleaner stops working.
- Suction: There are four suction modes to choose from: quiet, standard, strong and max. You can choose the suitable suction lever for the different area.
- Water level setting: Under mop mode, you can set the water output level.
- Only mop: In this mode, the robot vacuum cleaner only mop, not vacuum.
More Function
-
Timer: Scheduled function: Set the time to be cleaned. When the Scheduled time is up, the machine will automatically start the whole house cleaning; you can set up multiple appointment schedules with different repetition frequencies and different cleaning modes according to your needs.
-
Manual control: You can manually control the direction of Robot Vacuum Cleaner by long press the button. Note: the power button on the robot vacuum cleaner is the forwarding direction.
-
Find robot: Click this function, the Robot Vacuum Cleaner will give a voice promt of its location, so that you can find them easily.
-
Change map: Five maps can be saved, and specific maps can be selected according to the cleaning area.
-
Auto boost: Turn on it, the robot will auto boost from floor to carpet.
-
Custom mode: Turn on it, the robot will clean and mop according to your customized “Partition editing”.
-
Custom mode: You can customize the saved maps, different suction power, and different appointment times for different rooms. In the next cleaning, the machine can be imported with one key, no need to repeat settings.
-
Dust collecting treasure: You can set the times of collecting dust: never work, collect once after clean finished, collect twice after clean finished, collect three times after clean finished.
-
Y mop: When it is turned on, the machine will mop the floor imitating the humun do; when turned off, the machine will mop the floor in a single straight line.
-
Depth Clean: When you select the deep cleaning mode, the Robot Vacuum Cleaner will clean twice, and the cleaning path is “#” shape. (This setting is not applicable to scheduled cleaning).
-
Record: Record each of the cleaning time, duration and area of the Robot Vacuum Cleaner, and record total cleaning area, cleaning frequency and total time.
-
Voice and volume: You can change the language and volume of the voice broadcast of the sweeper.
-
Do not disturb mode: You can set the no-working time of Robot Vacuum Cleaner to avoid disturbing you in the midnight or other situations.
-
Consumables and maintenance: Show the status of consumable materials and their remaining working life, including Hepa filter, edge brush, and main brush.
Basic Settings
On the main control page, click the pen buttion in the upper right corner to enter the robot settings page, and you can choose the corresponding function.
- Share Device: Click “Share Device”, enter the account of the robot you want to share.
- Device Update: Please make sure use the device is under the latest version. (V0.2.2)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>