Laresar L6 Nex Robot Vacuum Cleaner with Mop User Guide
- June 15, 2024
- Laresar
Table of Contents
Laresar L6 Nex Robot Vacuum Cleaner with Mop
How to Use Your L6 Nex
Place Charging Dock and Power It
Note: Place the remaining wire into the trunking at the back of the Charging Dock.
Install the Side Brushes
Start Cleaning
- Press the power button on the machine or app control to start cleaning.
Recharge Method
- A) Automatically recharge after cleaning
- B) Automatically recharge when battery power: is 75%
- C) Manually recharge at any time
Attention
- Power lines and other debris scattered on the ground may trip up the robot, please remove them.
- Please clean the carpet tassels or work on short-hair rugs.
- A gap of less than 8cm on the bottom of the furniture may catch the product. If you need to clean it, please remove the furniture.
- A guardrail should be placed at the edge of the duplex to ensure the safe operation of the product.
APP Connection
APP Download
- Scan the QR code below or search the APP named “Laresmart” in Google Play or the APP store.
- Compatible with iOS 10.0 and higher.
- Compatible with Android 8.0 and higher.
- Note: The router, mobile phone, and robot vacuum cleaner should be as dose as possible to ensure smooth connection.
Add LG Nex device
Connect to 2,4GHz Wi-Fi
- Note: The network should be 2.4 GHz.
- Make sure the WI-Fl account and password are completely correct
- Reset Wi-Fi
Connect “Smartlife-XXXX” hotspot
Add the device
Successfully connected
Intelligent Cleaning (Default Mode)
- The robot vacuum cleaner scans the working environment, generates a map, and intelligently divides the areas.
- It will complete the cleaning of each area one by one by filling along the z shape behind the wall.
- After finishing cleaning, the robot vacuum cleaner will return to the charging base for charging.
Note:
- In order to better build the map, the robot needs to start from the charging base at the first cleaning.
- Note: Before using this function, complete the building of the map for the first cleaning in the Laresmart APP.
Cleaning as Required
Use the Laresmart APP to select the function of cleaning as required; select a point on the map and the robot vacuum cleaner will move to the designed position and clean a 1.6m X 1.6m square area with itself as the center.
Cleaning of Selected Area
- Use the Laresmart APP to select the function of cleaning of the selected area, select the area to be cleaned on the map, and the robot vacuum cleaner will clean the selected area.
- Note: The main unit might enter the unplanned area, so please clear the obstacles on the ground around the planned area, this area cannot play a role in safety isolation.
Cleaning of Defined Area
- Use the Laresmart APP to select the function of cleaning of the defined area, select the area to be cleaned on the MA, and the robot vacuum cleaner will clean the defined area.
- Note: The main unit might enter the unplanned area, so please clear the obstacles on the ground around the planned area, this area cannot play a role in safety isolation.
Restricted Area Setting
APP Main Interface Introduction
- If you have any problem with this device, please feel free to contact us: support09@laresar.us .
Documents / Resources
|
Laresar L6 Nex Robot Vacuum Cleaner with
Mop
[pdf] User Guide
L6 Nex Robot Vacuum Cleaner with Mop, L6 Nex, Robot Vacuum Cleaner with Mop,
Vacuum Cleaner with Mop, Cleaner with Mop
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>