Laresar L6 Pro Robot Vacuum User Guide

**Laresar L6 Pro Robot Vacuum User Guide

**

App Connection

1. Download App on Mobile Device
   Scan the QR code below or search the APP named “Laresmart” in Google play or APP store. Please register an account to log in after downloading the APP.
   

2. 
   iOS: Compatible with iOS 10.0 and higher.

3. 
   Android: Compatible with Android 8.0 and higher.

4. WiFi Connecting

Tips: In the first connection, your phone need connect to the WiFi (Home WiFi or mobile phone hotspot) thus to match your device.

1. 1. Press and hold the power button until you hear the voice prompt and release, and the blue light flashes slowly, then mobile phone will connect to 2.4G WIFI network.

2. Long press the power button   and the recharge button at the same time until you hear the voice prompt ” WIFI has been reset “.
3. After WIFI is reset, connect to the hotspot of the device named “Smart-Life-xxxxx”.
4. After successfully connecting to WIFI, return to the APP interface and click “Next”, the screen will automatically jump to the adding device state, and the APP will automatically match to “L6 pro” device. 5) After the device is successfully added, a voice prompt will appear: “Networked”, click “Done” then use the APP to operate the machine.

Charging Base Installation

1. Place the Charging Base against the wall on a flat ground, insert the power plug into a socket that meets the requirements, and turn on the power.
   

2. Ensure that there is no obstacle within 1.2 meters in front of the Charging Base, and within 0.5 meters on both sides.
   
   Tips: Fully charge the machine before use. It is recommended to start the machine from the charging base.

How To Use

1. 
   Power On/Off
   Power Indicator Turn On or Off: Long press for 3 seconds Start or Pause Cleaning: Short press once
   Tips: The machine will enter the sleep state if it is stationary and has no operation for more than 60 minutes. You can short press any key to wake up the machine in the sleep state.

2. Set the Cleaning Mode
   The default is the standard mode. After connecting to the APP, you can select more modes in the APP.

3. Recharge Indicator
   
   Recharging: Short press once
   Battery Indicator

   • Fully charged: Two grid of the “BATTERY” sign lights green long
     

   • Battery power ≤50%: A grid of the “BATTERY” sign lights green long
     
     Tips: During cleaning, when the battery is low or the cleaning task is done, the machine will automatically return to the charging base to collect dust and charge.

4. Dust Collection
   Dust bag is full: The sign will be highlighted.
   Dust bag is not installed correctly: The sign will flash
   During dust collection: The sign lights up
   
   Tips: When the dust bag is full, please replace the dust bag in time.

5. Install Mopping Module
   

6. Short press the power button , the robot vacuum pauses.

7. Install a mop holder and a mop cloth on the two-in-one water tank, and fill it with water.

8. Press the button again to continue sweeping as well as mopping.

9. Fault Status
   
   When the robot vacuum cleaner is abnormal, it will give a voice prompt and the power indicator will flash red quickly. Please refer to “Troubleshooting” on the User Manual for solutions.

10. Reset
    
    When the button does not respond or the device cannot be turned off, press and hold the reset button with a needle for 1 second, and the robot vacuum cleaner will power off and restart.

Email to Our Customer Service: support09@laresar.us
If you need help on WIFI connecting or operation, please feel free to contact us. We will provide more detailed using guide.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>