Laresar L6 Nex Robot Vacuum and Mop Combo User Guide

Laresar L6 Nex Robot Vacuum and Mop Combo

Specifications

• Product: L6 Nix Robot Vacuum Cleaner
• App Name : Laresmart
• Compatible with: iOS 10.0 and higher, Android 8.0 and higher
• Wi-Fi: 2.4GHz

Product Usage Instructions

1. APP Connection
   To connect the robot vacuum cleaner to the app, follow these steps:

2. 1. Download and install the Laresmart app from Google Play or App Store.

3. Ensure that your router, mobile phone, and robot vacuum cleaner are as close as possible for a smooth connection.

4. Press both 2 buttons on the robot vacuum cleaner for 5 seconds until you hear the sound “di di” and see the Wi-Fi indicator light flash.

5. In the Laresmart app, tap on “Add L6 Nex device” and select “Connect to 2.4GHz Wi-Fi”.

6. Make sure your Wi-Fi network is set to 2.4GHz and enter the correct Wi-Fi account and password.

7. Connect to the SmartLifeXXXX hotspot.

8. Add the device in the app.

9. Once successfully connected, you can control the robot vacuum cleaner using the app.

10. App Function Introduction
    The Laresmart app provides various functions for controlling the L6 Nex robot vacuum cleaner:

• Cleaning as Required: Use the app to select a point on the map and the robot vacuum cleaner will move to the designated position and clean a 1.6m X 1.6m square area with itself as the center.

• Cleaning of Selected Area : Use the app to select an area on the map and the robot vacuum cleaner will clean the selected area.

• Cleaning of Defined Area: Use the app to select an area on the map and the robot vacuum cleaner will clean the defined area.

• Restricted Area Setting: Use the app to set restricted areas on the map where the robot vacuum cleaner should not enter for cleaning.

• Intelligent Cleaning (Default Mode)
  The robot vacuum cleaner scans the working environment generates a map, and intelligently divides the areas. It will complete cleaning of each area one by one by filling along the Z shape behind the wall. After finishing cleaning, the robot vacuum cleaner will return to the charging base for charging. Note: In order to better build the map, the robot needs to star  from the charging base at the first cleaning.

• Cleaning of Selected Area
  Before using this function, complete building of the map for the first cleaning in the Laresmart app. Then, use the app to select the function of cleaning of the selected area, select the area to be cleaned on the map, and the robot vacuum cleaner will clean the selected area.
  Note: The main unit might enter unplanned areas, so please clear the obstacles on the ground around the planned area. This area cannot play a role of safety isolation.

• Cleaning of Defined Area
  Before using this function, complete building of the map for the first cleaning in the Laresmart app. Then, use the app to select the function of cleaning of the defined area, select the area to be cleaned on the map, and the robot vacuum cleaner will clean the defined area.
  Note: The main unit might enter unplanned areas, so please clear the obstacles on the ground around the planned area. This area cannot play a role in safety isolation.

• Restricted Area Setting
  Use the Laresmart app to select the restricted area editing function. Then, select and set the restricted area of cleaning on the map, and the machine will not enter the set area to clean.
  Note:

1. This function is only used to define the cleaning areas and cannot be used to block dangerous areas.
2. When moving the robot vacuum cleaner or there are obvious changes in your home environment, the map might become ineffective
   and the restricted area might be lost.

FAQ

1. Q: How can I download the Laresmart app?
   A: You can scan the QR code provided or search for “Laresmart” in Google Play or App Store to download the app.

2. Q: What Wi-Fi frequency does the robot vacuum cleaner support?
   A: The robot vacuum cleaner supports 2.4GHz Wi-Fi networks.

3. Q: Can I use the app to block dangerous areas?
   A: No, the app’s restricted area setting function is only used to define cleaning areas and cannot be used to block dangerous  areas.

If you have any problem of this device, please feel free to contact us: support09@laresar.us

APP Connection

• APP Download
  Scan the QR code below or search the APP named “Laresmart” in Google play or APP store.

• Compatible with iOS 10.0 and higher. Compatible with Android 8.0 and higher.
  Note: The router, mobile phone, and robot vacuum cleaner should be as close as possible to ensure smooth connection.

App Function Introduction

1. APP Main Interface Introduction

2. Intelligent Cleaning (Default Mode) The robot vacuum cleaner scans the working environment, generates a map and intelligently divides the areas. It will complete cleaning of each area one by one by filling along the Z shape behind the wall. After finishing cleaning, the robot vacuum cleaner will return to the charging base for charging.
   Note:
   In order to better build the map, the robot needs to start from the charging base at the first cleaning.
   Note: Before using this function, complete building of the map for the first cleaning in the Laresmart APP.

3. Cleaning as Required Use the Laresmart APP to select the function of cleaning as required; select a point on the map and the robot vacuum cleaner will move to the designed position and clean a 1.6m X 1.6m square area with itself as the center.

4. Cleaning of Selected Area
   Use the Laresmart APP to select the function of cleaning of the selected area, select the area to be cleaned on the map, and the robot vacuum cleaner will clean the selected area.
   Note: The main unit might enter the unplanned area, so please clear the obstacles on the ground around the planned area, and this area cannot play a role of safety isolation.
   6 Restricted Area Setting

5. Cleaning of Defined Area
   Use the Laresmart APP to select the function of cleaning of the defined area, select the area to be cleaned on the map, and the robot vacuum cleaner will clean the defined area.
   Note: The main unit might enter the unplanned area so please clear the obstacles on the ground around the planned area, and this area cannot play a role in safety isolation.

6. Restricted Area Setting
   Use the Laresmart APP to select the restricted area editing function, select and set the restricted area of cleaning on the map, and the machine will not enter the set area to clean.
   Note:

7. This function is only used to define the cleaning areas and cannot be used to block dangerous areas.

8. When moving the robot vacuum cleaner or there are obvious changes in your home environment, the map might become ineffective and the restricted area might be lost.

How to Use Your L6 Nex

Place Charging Dock and Power It
Note: Place the remaining wire into the trunking at the back of the Charging Dock.

Install the Side Brushes

Start Cleaning

• Press the power button on the machine or app control to start cleaning.

4 Recharge Method

• A   Automatically recharge after cleaning
• B   Automatically recharge when battery power ≤ 15%
• C   Manually recharge at any time

Attention

1. Power lines and other debris scattered on the ground may trip up the robot, please remove them.
2. Please clean the carpet tassels or work on short-hair rugs.
3. A gap of less than 8cm on the bottom of the furniture may catch the product. If you need to clean it, please remove the furniture.
4.  A guardrail should be placed at the edge of the duplex to ensure the safe operation of the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>