Yealink SIP-T30 Classic IP Phone User Guide
- June 3, 2024
- Yealink
Table of Contents
SIP-T30 & T30P
Classic IP Phone
Quick Start Guide
SIP-T30 Classic IP Phone
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
Package Contents
The following items are included in your package. If you find anything missing, contact your systemadministrator.
We recommend that you use the accessories provided or approved by Yealink. The unapproved third-party accessories may result in reduced performance.
Assembling the Phone
- Attach the stand:
You can also mount the phone to a wall. - Connect the handset and optional headset:
- Connect the network and power:
You have two options for network and power connections. Your system administrator will advise you which one to use.
The IP phone should
be used with Yealink original power adapter (5V/600mA) only. The use of the
third-party power adapter may cause the damage to the phone. If you are
connecting a PC to your phone, we recommend that you use the Ethernet cable
provided by Yealink.
If inline power (PoE) is provided, you don’t need to connect the power adapter. Make sure the hub/switch is PoEcompliant.
PoE is only applicable to the SIP-T30P IP phone.
Startup
After the IP phone is connected to the network and supplied with power, it
automatically begins the initialization process.
After startup, the phone is ready for use. You can configure the phone via
phone user interface or web user interface.
Configuring Your Phone
Configuring via web user interface
Accessing the web user interface:
- Press (the OK key) when the phone is idle to obtain the IP address of the phone.
- Open a web browser on your computer, enter the IP address into the address bar (e.g., “http://192.168.0.10” or “192.168.0.10”) and then press the Enter.
- Enter the user name (default: admin) and password (default: admin) in the login page and click Login.
Network Settings: Click on Network->Basic->IPv4 Config
You can configure the network settings in the following ways:
DHCP: By default, the phone attempts to contact a DHCP server in your network
to obtain its valid network settings, e.g., IP address, subnet mask, gateway
address and DNS address.
Static IP Address: If your phone cannot contact a DHCP server for any reason,
you need to configure the IP address, subnet mask, gateway address, primary
DNS address and secondary DNS address for the phone manually.
The IP phone also supports IPv6, but IPv6 is disabled by default.
Wrong network settings may result in the inaccessibility of your phone and may
have an impact on the network performance. Contact your system administrator
for more information.
Account Settings: Click on Account- >Register
Parameters of the account:
Register Status: It shows the register status of the current account.
Line Active: You can select Enabled/Disabled to enable/disable the account.
Label: It is shown on the LCD screen to identify the account.
Display Name: It is shown as caller ID when placing a call.
User Name: It is provided by ITSP for registration (required).
Register Name: It is an authenticated ID for authentication provided by ITSP
(required).
Password: It is provided by ITSP for registration (required).
Server Host: It is provided by ITSP for registration (required).
Register status icons on the LCD screen:
| Registered
---|---
| Registering
| Register Failed
Check with your system administrator if any error appears during the registration process or a specific configuration is required for your registration.
Configuring via phone user interface
Network Settings:
Press the Menu soft key when the phone is idle, select Settings->Advanced
Settings (default password: admin)->Network->WAN Port->IPv4 to configure the
network.
Account Settings: Press the Menu soft key when the phone is idle, select
Settings->Advanced Settings (default password: admin)->Accounts to configure
the account.
For more information on account parameters, refer to Configuring via web user
interface above.
Placing a Call
Using the handset:
- Pick up the handset.
- Enter the number and press the Send soft key.
Using the speakerphone:
- With the handset on-hook, press .
- Enter the number and press the Send soft key.
Using the headset:
- With the headset connected, press to activate the headset mode.
- Enter the number and press the Send soft key.
Answering a Call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
You can reject an incoming call by pressing the Reject soft key.
Ending a Call
Using the handset:
Hang up the handset or press the EndCall soft key.
Using the speakerphone:
Press or the EndCall soft key.
Using the headset:
Press the EndCall soft key.
Redial
- Press to enter the Placed Calls list, select the desired entry, and press or the Send soft key.
- Press twice when the phone is idle to dial out the last dialed number.
Call Mute
- Press to mute the microphone during a call.
- Press again to un-mute the call.
Call Hold
To place a call on hold:
Press the Hold soft key during an active call.
To resume the call, do one of the following:
- If there is only one call on hold, press the Resume soft key.
- If there is more than one call on hold, select the desired call, and press the Resume soft key.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
- Press or the Trans soft key during a call.
- Enter the number you want to transfer to.
- Press or the B Trans soft key.
Semi-Attended Transfer
- Press or the Trans soft key during a call.
- Enter the number you want to transfer to, and press the Send soft key.
- Press or the Trans soft key when you hear the ring-back tone.
Attended Transfer
- Press or the Trans soft key during a call.
- Enter the number you want to transfer to, and press the Send soft key.
- Press or the Trans soft key when the second party answers.
Call Forward
To enable call forward:
- Press the Menu soft key when the phone is idle, and then select Features->Call Forward.
- Select the desired forward type.
- Enter the number you want to forward to. For No Answer Forward, select the desired ring time to wait before forwarding from the After Ring Time field.
- Press the Save soft key to accept the change.
Call Conference
- Press the Conf soft key during an active call. The call is placed on hold.
- Enter the number of the second party, and press the Send soft key.
- Press the Conf soft key again when the second party answers. All parties are now joined in the conference.
- Press the EndCall soft key to disconnect all parties.
You can split the conference call into two individual calls by pressing the Split soft key.
Voice Message
Message waiting indicator on the idle screen indicates that one or more voice
messages are waiting at the message center. The power indicator LED slowly
flashes red.
To listen to voice messages:
- Press or the Connect soft key.
- Follow the voice prompts to listen to your voice messages.
Call History
- Press the History soft key when the phone is idle, press to scroll through the list.
- Select an entry from the list, you can do the following:
• Press the Send soft key to call the entry.
• Press the Delete soft key to delete the entry from the list.
If you press the Option soft key, you can also do the following:
- Select Detail to view detailed information about the entry.
- Select Add to Contacts to add the entry to the local directory.
- Select Add to Blacklist to add the entry to the blacklist.
- Select Delete All to delete all entries from the list.
Contact Directory
To add a contact:
- Press the Dir soft key when the phone is idle, and then select All Contacts.
- Press the Add soft key to add a contact.
- Enter a unique contact name in the Name field and contact numbers in the corresponding fields.
- Press the Save soft key to accept the change.
To edit a contact:
- Press the Dir soft key when the phone is idle, and then select All Contacts.
- Press to select the desired contact, press the Option soft key and then select Detail from the prompt list.
- Edit the contact information.
- Press the Save soft key to accept the change.
To delete a contact:
1. Press the Dir soft key when the phone is idle, and then select All
Contacts.
2. Press to select the desired contact, press the Option soft key and then
select Delete from the prompt list.
3. Press the OK soft key when the LCD screen prompts “Delete selected item?”.
Volume Adjustment
Press to adjust the volume.
Regulatory Notices
Operating Ambient Temperatures
- Operating temperature: +14 to 122°F (-10 to 50°C)
- Relative humidity: 5% to 90%, noncondensing
- Storage temperature: -22 to +160°F (-30 to +70°C)
Warranty
Our product warranty is limited only to the unit itself, when used normally in
accordance with the operating instructions and the system environment. We are
not liable for damage or loss resulting from the use of this product, or for
any claim from a third party. We are not liable for problems with Yealink
device arising from the use of this product; we are not liable for financial
damages, lost profits, claims from third parties, etc., arising from the use
of this product.
DC symbol
is the DC voltage symbol.
Restriction of Hazardous Substances Directive (RoHS)
This device complies with the requirements of the EU RoHS Directive.
Statements of compliance can be obtained by contacting
support@yealink.com.
Safety Instructions
Save these instructions. Read these safety instructions before use!
The following basic safety precautions should always be followed to reduce
risk of fire, electrical shock, and other personal injury.
General Requirements
-
Before you install and use the device, read the safety instructions carefully and observe the situation during operation.
-
During the process of storage, transportation, and operation, please always keep the device dry and clean.
-
During the process of storage, transportation, and operation, please avoid collision and crash of the device.
-
Please attempt not to dismantle the device by yourself. In case of any discrepancy, please contact the appointed maintenance center for repair.
-
Without prior written consent, no organization or individual is permitted to make any change to the structure or the safety design of the device.
Yealink is under no circumstance liable to consequences or legal issues caused by such changes. -
Please refer to the relevant laws and statutes while using the device.
Legal rights of others should be respected as well.
Environmental Requirements
- Place the device at a well-ventilated place. Do not expose the device under direct sunlight.
- Keep the device dry and free of dusts.
- Place the device on a stable and level platform.
- Please place no heavy objects on the device in case of damageand deformation caused by the heavy load.
- Keep at least 10 cm between the device and the closest object for heat dissipation.
- Do not place the device on or near any inflammable or fire-vulnerable object, such as rubber-made materials.
- Keep the device away from any heat source or bare fire, such as a candle or an electric heater.
- Keep the device away from any household appliance with strong magnetic field or electromagnetic field, such as a microwave oven or a refrigerator.
Operating Requirements
- Do not let a child operate the device without guidance.
- Do not let a child play with the device or any accessory in case of accidental swallowing.
- Please use the accessories provided or authorized by the manufacturer only.
- The power supply of the device shall meet the requirements of the input voltage of the device. Pleaseusethe provided surge protection power socket only.
- Before plugging or unplugging any cable, make sure that your hands are completely dry.
- Do not spill liquid of any kind on the product or use the equipment near water, for example, near a bathtub, washbowl, kitchen sink, wet basement or near a swimming pool.
- Do not tread on, pull, or over-bend any cable in case of malfunction of the device.
- During a thunderstorm, stop using the device and disconnect it from the power supply. Unplug the power plug and the Asymmetric Digital Subscriber Line (ADSL) twisted pair (the radio frequency cable) to avoid lightning strike.
- If the device is left unused for a rather long time, disconnect it from the power supply and unplug the power plug.
- When there is smoke emitted from the device, or some abnormal noise or smell, disconnect the device from the power supply, and unplug the power plug immediately. Contact the specified maintenance center for repair.
- Do not insert any object into equipment slots that is not part of the product or auxiliary product.
- Before connecting a cable, connect the grounding cable of the device first. Do not disconnect the grounding cable until you disconnect all other cables.
Cleaning Requirements
- Before cleaning the device, stop using it and disconnect it from the power supply.
- Use a piece of soft, dry and anti-static cloth to clean the device.
- Keep the power plug clean and dry. Using a dirty or wet power plug may lead to electric shock or other perils.
ENVIRONMENTAL RECYCLING
Never dispose of the device with domestic waste Ask your Town Council about
how to dispose of it in an environmentally friendly way. The cardboarc box,
plastic packaging and player components may be recycled in accordance with
prevailing recycling regulations in your country.
Always adhere to prevailing regulations
Those who fail to do so may be fined or prosecuted in accordance with the law.
The crossed out garbage can that appears on the device means that when it has
reached the end of its useful life, it should be taken to a special waste
disposal centre and treated separately to general urban waste.
Troubleshooting
The unit cannot supply power to Yealink device.
There is a bad connection with the plug.
- Clean the plug with a dry cloth.
- Connect it to another wall outlet.
The usage environment is out of operating temperature range.
- Use in the operating temperature range.
The cable between the unit and the Yealink device is connected incorrectly.
- Connect the cable correctly.
You cannot connect the cable properly.
- You may have connected a wrong Yealink device.
- Use the correct power supply.
Some dust, etc., may be in the port.
- Clean the port.
Contact your dealer or authorized service facility for any further questions.
Contact Information
YEALINK NETWORK TECHNOLOGY CO.,LTD.
309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen City,
Fujian, P.R.C
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V.
Strawinskylaan 3127, Atrium Building, 8th floor, 1077ZX Amsterdam, The
Netherlands
YEALINK (USA) NETWORK TECHNOLOGY CO., LTD.
999 Peachtree Street Suite 2300, Fulton, Atlanta, GA, 30309, USA
Made in China
Declaration of Conformity
We,
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD,
Address: 309, 3rd Floor, No.16, Yun Ding North Road, Huli District, Xiamen
City, Fujian, P.R.C
CE DATE: 10th /July/2020 declare that the product
Type: Classic IP Phone
Model: SIP-T30, SIP-T30P
meets the essential requirements and other relevant provisions according to
the following EC directive
Directive: 2014/35/EU, 2014/30/EU;
Conformity
The product complies with the following standards:
Safety : EN 62368-1:2020/A11:2020
EMC: EN 55032:2015
EN 55035:2017
EN61000-3-2: 2014
EN61000-3-3: 2013
Directive 2011/65/EU and (EU)2015/863 of the European Parliament and of the
Council of 8 June 2011 and 4 June 2015 on the restriction of the use of
certain hazardous substances in electrical and electronic equipment(RoHS 2.0)
Directive 2012/19/EU of the European Parliament and of the Council of
4.July.2012 on Waste electrical and electronic equipment(WEEE)
Regulation (EC) No.1907/2006 of the European Parliament and of the Council of
18.December.2006 on Registration, Evaluation, Authorization, and Restriction
of Chemicals (REACH)
YEALINK (EUROPE) NETWORK TECHNOLOGY B.V
Address: Strawinskylaan 3127, Atrium Building, 8th floor,
1077ZX Amsterdam, the Netherlands
Telephone: +31(0)646111373
Email: EUROPE@Yealink.com
Addr: 309, 3rd Floor, No.16, Yun Ding North Road,
Huli District, Xiamen City, Fujian, P.R.C
Tel: +86-592-5702000
Fax: +86-592-5702455
Technical Support
Visit Yealink WIKI (http://support.yealink.com/) for the latest firmware,
guides, FAQ, Product documents, and more. For better service, we sincerely
recommend you to use Yealink Ticketing system (https://ticket.yealink.com)
to submit all your technical issues.
YEALINK(XIAMEN) NETWORK TECHNOLOGY CO.,LTD.
Web: www.yealink.com
Copyright©2021 YEALINK(XIAMEN) NETWORK
TECHNOLOGY CO.,LTD.All rights reserved.
References
- Yealink Support
- Yealink | UC & C Terminal, Video Collaboration, Conference Phone, IP Phone, Headsets & Video Conferencing
- Yealink Ticket
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>