fitbit Smart Protector for Sense Versa 3 and Versa 4 User Manual
- June 3, 2024
- Fitbit
Table of Contents
Smart Protector for Sense Versa 3 and Versa 4
User Manual
In the Box
How to Install
Watch the video tutorial before use.
- Remove the covers of the sticker ring and stick it firmly on the table.
- Place your Fitbit on the sticker ring (it’s easier if you remove the Fitbit straps first).
- First, use the wet wipe to clean your Fitbit screen. Next, use the dry wipe to clean any dust that may remain.
- Peel off layer 1 from the screen protector and place it on your Fitbit screen. Use the cloth side of the card provided to squeeze out any air bubbles.
- Hold the bottom of the screen protector with the card and remove layer 2. Squeeze out any air bubbles.
- Remove layer 3 and squeeze out any air bubbles.
- Remove layer 4 and you are finished.
Specifications
Compatible model: | Fitbit Sense, Versa 3, and Versa 4 |
---|---|
Material: | TPU |
Dimension: | 1.42 x 1.42 x 0.003 in |
Get More Support
Scan the QR code below or email us at: contact@wasserstein- home.com
This product has been certified by Wasserstein to meet Fitbit’s compatibility
standards.
Neither Google nor Fitbit is responsible for the operation of this product or
its compliance with any applicable safety or other requirements. Learn more at
g.co/madeforgoogle.
Google’s “Made for” badges, Fitbit Sense, Versa 3, Versa 4, and related marks
and logos are trademarks of Google LLC.
Fitbit Sense, Versa 3, and Versa 4 is not included.
Fitbit Sense, Versa 3, and Versa 4 is a trademark of Fitbit.
Wasserstein is not affiliated with Fitbit.
Wasserstein is a trademark of Dropcases Ltd.
www.wasserstein-home.com
Made in China
Documents / Resources
|
fitbit Smart Protector for Sense Versa 3 and Versa
4
[pdf] User Manual
Smart Protector for Sense Versa 3 and Versa 4, Smart Protector, Sense Versa 3
Smart Protector, Sense Versa 4 Smart Protector, Protector
---|---