WORX WX031.X 20V Cordless Wet-Dry Vacuum Cleaner User Manual
- June 3, 2024
- Worx
Table of Contents
WORX WX031.X 20V Cordless Wet-Dry Vacuum Cleaner
SAFETY INSTRUCTIONS
PRODUCT SAFETY
GENERAL POWER TOOL SAFETY WARNINGS
WARNING : Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- The appliance is only to be used with the power supply unit provided with the appliance.
- The battery must be removed from the socket-outlet before cleaning or maintaining the appliance.
- Only use the detachable supply unit (model:WA3014) provided with this appliance.
- Rechargeable batteries are to be removed from the appliance before being charged.
- Observe the plus (+) and minus (–) marks on the battery and ensure correct use.
SAFETY WARNINGS FOR BATTERY PACK
- a) Do not dismantle, open or shred cells or battery pack.
- b) Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials. When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
- c) Do not expose battery pack to heat or fire. Avoid storage in direct sunlight.
- d) Do not subject battery pack to mechanical shock.
- e) In the event of battery leaking, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
- f) Keep battery pack clean and dry.
- g) Wipe the battery pack terminals with a clean dry cloth if they become dirty.
- h) Battery pack needs to be charged before use. Always refer to this instruction and use the correct charging procedure.
- i) Do not maintain battery pack on charge when not in use.
- j) After extended periods of storage, it may be necessary to charge and discharge the battery pack several times to obtain maximum performance.
- k) Recharge only with the charger specified by Worx. Do not use any charger other than that specifically provided for use with the equipment.
- l) Do not use any battery pack which is not designed for use with the equipment.
- m) Keep battery pack out of the reach of children.
- n) Retain the original product literature for future reference.
- o) Remove the battery from the equipment when not in use.
- p) Dispose of properly.
- q) Do not mix cells of different manufacture, capacity, size or type within a device.
- r) Keep the battery away from microwaves and high pressure.
SYMBOLS
20V Cordless Wet/Dry Vacuum Cleaner
COMPONENT LIST
- HOSE WITH TAPERED NOZZLE
- BLOWER OUTLET
- SUCTION INLET
- HANDLE
- BATTERY COVER
- LID
- HOSE HOOK
- TANK LATCH
- COLLECTION CONTAINER
- ON/OFF SWITCH
- ECO BUTTON
- WIDE NOZZLE
- CREVICE NOZZLE
- SHOULDER STRAP
Some of the accessories mentioned in illustrations or texts are not included in the scope of supply.
TECHNICAL DATA
| WX031| **WX031.X *
---|---|---
Rated Voltage| 20V Max.
Suction| 16 Kpa
Air Flow| 1.1 m3/min
Dustbin Capacity| 8 L
Water Capacity| 3 L
Run Time (4.0Ah )| 40 mins
Machine Weight (bare tool)| 3 kg
- X=1-999, A-Z, M1-M9 there are only used for different customers, there are no safe relevant changes between these models.
- Voltage measured without workload. Initial battery voltage reaches maximum of 20 volts. Nominal voltage is 18 volts.
Category| Type| Capacity
---|---|---
20V Battery
| WA3551| 2.0Ah
WA3014| 4.0Ah
20V Charger| WA3880| 2.0A
We recommend that you purchase your accessories from the same store that sold you the tool. Refer to the accessory packaging for further details. Store personnel can assist you and offer advice.
INTENDED USE
This machine can be used as both vacuum cleaner and blower. With the strong
suction power, it can easily pick up wet and dry messes.
OPERATING INSTRUCTIONS
NOTE : Please read the instructions carefully before use.
ASSEMBLY AND OPERATION
Function as a blower
Insert the hose into the blower outlet (Position 2).
|
See Fig. E
---|---
Checking the battery charge condition NOTE: Fig. F1 only applies for the
bat- tery pack with battery indicator light.|
See Fig. F1
Charging the battery pack| See Fig. F2
Installing the battery pack| See Fig. F3
OPERATION|
Turning on the machine
Press the on-off switch to start operation.
Power Selection
When the switch is pressed for the first time, the machine starts and works at high speed. Press the ECO button for a low speed. Press it again, the cleaner will switch to high speed. To stop, press the ON/OFF switch again.
NOTE: When working under high speed, the light is not on. When working under ECO mode, the light shows green.
WARNING: Please keep the air intake unobstructed, otherwise it
may cause motor overheating and may damage the machine.
|
See Fig. G1, G2
Using as a vacuum cleaner
Dry Vacuuming
Vacuum items only small enough to fit through the hose. When vacuuming, make sure that the filter stays in place.
The performance of the vacuum will decrease with a full collection container. When emptying the collection container, check to see if the filter needs cleaning. Attention:
1. Do not suck sharp objects such as nails into the vacuum.
2. Do not suck objects with high temperature such as carbon ash. Please let it cool down first.
3. Clean the HEPA filter regularly.
Wet Vacuuming
This machine is equipped with double- probe detector, which is designed to shut off the suction when the collection
container reaches full wet capacity. When the collection container is full, empty
the collection container as shown in Maintenance.
Attention:
1. Put the machine on the flat ground.
2. Make sure the filter is completely dry after picking up water or wet debris.
|
See Fig. H1, H2
---|---
Using as a blower
Open the rubber cover on position 2 to start using the air blowing function
and put it back to its original place after completion.
WARNING: Never point the nozzle at anyone in the vicinity.
|
See Fig. I
MAINTENANCE
Remove the battery before carrying out any servicing or maintenance. Emptying the collection container (See Fig. J1, J2, J3)
Dry Waste: Remove the battery pack. Unhook the two locking latches and
remove the lid. Inspect the filter, lightly shake any dust or dirt from it, or
replace if necessary. Empty the collection container, or wash out if
necessary. Before replacing the lid, make sure all pieces are completely dry.
Reinstall lid and lock securely.
Liquid Waste: Remove the battery pack. Unhook the two locking latches and
remove the lid. Empty the collection container, or wash out if necessary.
Before reinstalling the lid, make sure all pieces are completely dry.
Reinstall lid and lock securely.
WARNING : Do not use the vacuum without installing the filter. If suction
has decreased, empty the tank of debris or clean the filter.
Filter Cleaning (See Fig. K)
Remove the battery pack. Unlock the two locking latches and remove the lid.
To Clean/Replace: Remove the filter by loosening the screws on top of the tank
lid. Lightly shake any dust or dirt off the filter or replace it if needed.
Reinstall the filter by aligning it back on the lid and tightening the screws.
NOTE : Make sure the filter is seated properly.
WARNING : Never wash the filter in a washing machine.
NOTE : Clean the filter regularly to ensure optimal suction and
performance.
STORAGE
Store the hose and nozzles as shown in Fig. L1, L2, L3. Clean all foreign
material from the vacuum cleaner. Clean the outside of the collection
container with warm water and mild soap. Empty and clean the collection
container, hose, nozzles, and attachments with warm water and mild soap, and
allow to completely dry before storage. The collection container should be
disinfected if needed before prolonged storage. Store indoors where is dry and
inaccessible to children. Keep away from corrosive agents such as garden
chemicals and de-icing salts.
FOR BATTERY TOOLS:
The ambient temperature range for tool and battery use and storage is 0oC-
45oC. The recommended ambient temperature range for the charging system during
charging is 0C-40C.
TROUBLESHOOTING
| Issue | Causes | Solutions |
|---|
Vacuum does not turn on
| No battery| Install battery
Battery is low| Charge the battery
Filter blocked| Clean or replace the filter
Tank lid is not firmly latched| Secure the tank lid
Hose blocked| Clean blockage
ENVIRONMENTAL PROTECTION
Waste electrical products must not be disposed of with household waste. Please
recycle where facilities exist. Check with your local authorities or retailer
for recycling advice.
DECLARATION OF CONFORMITY
We, Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany On behalf of Positec declare that
the product Description Battery operated vacuum cleaner Type WX031 WX031.X
(031-designation of machinery, representative of Battery-operated vacuum
cleaner) Function For household cleaning or similar purposes.
Complies with the following Directives:
2014/35/EU,
2014/30/EU,
2011/65/EU&(EU)2015/863
Standards conform to
EN 60335-1,
EN 60335-2-2,
EN 62233,
EN 55014-1,
EN 55014-2
2021/05/25
Allen Ding
Deputy Chief Engineer,Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China.
DECLARATION OF CONFORMITY
We, Positec (UK & Ireland) Ltd, PO Box 6242, Newbury, RG14 9LT, UK On behalf
of Positec declare that the product Description Battery operated vacuum
cleaner Type WX031 WX031.X (031-designation of machinery, representative of
Battery-operated vacuum cleaner).
Function For household cleaning or similar purposes.
Complies with the following Directives:
Supply of Machinery (Safety) Regulations 2008 Electromagnetic Compatibility
Regulations 2016 The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic
Equipment Regulations: Standards conform to BS EN 60335-1, BS EN
60335-2-2, BS EN 62233, BS EN 55014-1, BS EN 55014-2
2021/05/25
Allen Ding
Deputy Chief Engineer,Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
After-sales Service and Application
At www.worx.com you can order spare parts or
arrange the collection of a product in need of servicing or repair.
Tel. Service: 0345 202 9679
E-Mail:customerservices@worxtools.com
www.worx.com
Copyright © 2022, Positec. All Rights Reserved. AR01606002.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>