nordlux ARKI Wall Light Instruction Manual
- June 3, 2024
- nordlux
Table of Contents
nordlux ARKI Wall Light Instruction Manual
IP5X: Dust is prevented from entering the lamp in amounts that can cause damage to the function/safety of the lamp.
IPX4: Raindrops falling from any angle will not affect the function/safety of the lamp.
Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
The lamp is only suitable for connecting directly to the mains.
Do not exceed the maximum wattage.
Only suitable for low energy bulbs.
The mounting instruction must not be discarded.
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city office, your household waste disposal service or the store where you purchased this product.
www.nordlux.com
DK-9000Aalborg
Mounting Instruction
In Denmark, outdoor lightings must be mounted by an authorized electrician.
We congratulate you on your new outdoor lamp!
Guarantee
The Nordlux Outdoor lamps in copper and galvanized are guaranteed for up to 15 years. This guarantee applies to extensive corrosion in the form of holes in the metal caused by rust. The guarantee is subject to presentation of receipt.
There is not guarantee on the components which have been damaged by wear and tear or mistreatment of the lamps
We congratulate you on your new outdoor lamp
Stainless steel
Remember to take care of your lamp. Just follow the guidelines below.
The shiny, uniform and decorative surface of stainless steel makes it very
suitable for outdoor use.
It is an alloy consisting of iron, chrome and nickel. During bath pickling, a
thin, rustproof oxide layer forms on the surface.
The surface is continually vulnerable to atmospheric conditions, and from
other effects of the close environment. This means that the lamp must be
regularly maintained if its surface is to remain shiny and untarnished by
rust.
Before setting it up, treat your lamp with acid-free oil, and dry it off with
a soft cloth. Repeat this three or four times a year.
Stainless steel lamps are not recommended for use in aggressive environments
such as coastal, agricultural or industrial areas.
Copper lamps
Our copper lamps are made of solid copper. The mechanical preparation leaves
minor scratches in the surface which quickly disappears in connection with the
patina process.
After a few showers the copper will get stained but the aerated air and
moisture will soon make the lamp appear with a dark brown surface.
The characteristic patina-green color will first appear after serval years,
dependent on the environment, weather etc.
Hot-galvanized lamps
The zinc treatment of the steel lamps is executed manually in plants.
The temperature of the melted zinc is about 460 degrees. When the lamps are
dipped in melted zinc a reaction between the metalls occurs, which develops
alloys in the surface.
The lamp and the components of the lamp are manually dipped in the hot zinc.
This treatment leaves variations in the coating in the form of partly an
uneven surface and partly minor formations of drops.
Thin »zinc curtains« might also occur on the surface and they show as a thin
film which hangs down from the edge of the lamp. This film can easily be
removed or brushed off with a soft brush.
Condensation
Condensation is a natural phenomenon arising under specific atmospheric
conditions. Damp heat and cold air meet, which causes condensation of water on
the surface.
When water heats up it leads to rising water vapour, which will be able to
affect electric components.
Condensation is not included by Nordlux warranty, unless it is possible to
prove that a technical /production error in the lighting causes entry of
water.
In case of condensation please check:
– If the lighting is mounted according to instructions. Washers should seal
tightly. Make sure to tension screws and lenses.
-In garden lightings rising damp from the ground may cause condensation in the metal post. This problem can be defeated by filling sealing material into the metal post.
-It is highly important that drainage holes are kept free of impurities if any.
BEFORE ASSEMBLING THE BOLLARD AGAIN DO REMEMBER TO WIPE OFF ALL PARTS!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>