ARMODD 9001 Silentwatch 4 Pro Mens Smart Watch Instructions
- June 4, 2024
- ARMODD
Table of Contents
**
**
ARMODD 9001 Silentwatch 4 Pro Mens Smart Watch
Product description
Charging and Switching On
-
The watch must be fully charged before first use. Use the charging cable supplied with the watch. Always charge for
at least 2 hours and do not move the watch while it is
being charged. -
Connect the charging cable to the USB port of your notebook (it must be plugged in) or conventional mobile phone adapters (5 V) and attach the magnetic charging puck at the opposite end of the cable to the watch’s charging surfaces.
-
If the display does not come on on its own, gently press the top button button 1 for at least 3 seconds.
Pairing the watch with a mobile phone
Watch settings, the current time and date and their proper operation require
that the watch be paired with a mobile phone via the recommended Wear Pro app.
Do not connect the watch to your mobile phone via your phone’s Bluetooth;
always use the app. You can download the app using the QR code below or look
it up in Google Play or the App Store.
-
Android
-
iOS
-
During installation, we recommend that you allow all authorizations that you will be requested, including the running of the app in the background.
-
Depending on your mobile phone model, we also recommend checking setting authorizations in the app management in your phone, especially location tracking.
-
Before pairing, activate Bluetooth (making sure it is visible for all devices for an unlimited time) and GPS in your phone. Do not pair the watch using the Bluetooth menu of the phone.
-
Open the Wear Pro app. It is recommended that you create an account.
-
The watch should be as close as possible to the phone during pairing.
-
By tapping on the “Device” icon on the bottom bar in the app, you can pair the watch with by scanning the watch’s QR code (see “Quick set-up” – icon i) (Fig. 6) or manually .
-
When pairing manually, tap on your device in the scanned devices shown.
-
Once the devices have been paired, set the required watch functions in the app .
-
To allow for more precise measurements, it is recommended that you fill in your personal profile in the app.
Language settings
Tap on the Settings icon in the watch and then on the Language icon and select
the desired language.
- The images here depict the Android OS. The appearance in iOS may differ.
Watch controls
Buttons
Top button 1
- press briefly to activate the display or return to the menu.
- press and hold to turn the watch on/off.
Side button 2
- to enter the menu press 1x
- to change the menu’s appearance, press 2x in the menu
- carefully turn the dial and choose among watch faces or browse functions
Bottom button 3
- press briefly to enter the sport menu
- if the display is switched off, press briefly to switch it on
Press the buttons gently so as to not damage them. You may only carefully turn
the side button 2. You must not turn the top and bottom buttons.
Touchscreen
Swipe from left to right to show a list of calls, messages and the most recent
functions used .
Swipe from right to left to show “Favourite
functions”, and by tapping on “+”, you can add them or remove them by keeping
your finger on a selected function. Swipe from top to bottom to show “Quick
settings” .
Swipe from bottom to top to display the function
menu.
Swipe from bottom to top then from top to bottom to switch between functions.
A short tap activates the function of your choice.
Change the watch face
You may change it using several methods, both in the watch and using the app.
Turning side button 2 Watch face change – Holding your finger on the display
shows an overview of watch faces to select from by swiping from right to left.
Tap on the watch face of your choice to select it. In “Settings” – Change
watch face Other watch faces can be added directly from the app. In the app,
tap on the first row of choices 
and select from the gallery the desired watch face to be transferred to the
watch.
Watch face settings
Successfully setting up the watch face requires that the watch and the mobile
phone be charged sufficiently. In the app, tap on the first row of choices
and then on the first watch face in the gallery .
Tap again on the watch face 
and select whether to take another photo or
select an image from your phone. Edit the image in the viewport. To transfer
the image to the watch, tap on “Start update” .
In the event of an error message during the upload, please charge
the phone and the watch and repeat the process.
Messages
To receive messages and notifications, your watch must be paired with your
phone, and the receipt of messages and notifications must be allowed in the
WearPro app .
Furthermore, you must allow the app access to messages and
notifications in the settings of your phone. (This is typically done during
installation.)
Display activation by twisting the wrist
Allow and set up in the Wear Pro app in your phone .
Calling
Activation of this function requires the watch to paired with your phone’s
Bluetooth.
- Make sure Bluetooth is on in your phone.
- Tap on “BT call” on the watch and allow the function .
- Tap on “Bluetooth calling” in the WearPro app
and pair the watch with the phone. Always pair the watch with your phone’s
Bluetooth only via the app.
If the function is permitted and the watch is paired with your phone, you may
make and answer calls both on the watch and your phone. Up to 20 contacts can
be saved on the watch via the app. Open “Favourite contacts” in the app
and tap on “+Add contacts”. Select the desired contact from your list and tap
on “Synchronise” to save.
The calling function can be switched off anytime and turned back on by tapping
on “BT call” on the watch.
Function menu
| Calling
---|---
| Messages
| Contacts
| Call list
| Daily menu
| Sports
Walking, Running, Cycling, Skipping, Badminton, Basketball, Football
| Pulse, ECG, Blood Pressure
after switching, wait for the measurement to begin and end.
| Music player
Tap to enter the music player menu. The watch must be paired with your phone.
Tap to play/stop, skip one track forward or backward. Audio output from the
watch – allow “BT call”.
Audio output from your phone – deactivate “BT call” .
---|---
| Sleep
This function monitors your sleep automatically at night, as long as you have your watch on. The sleep data will be displayed the following morning in the app as well as on the watch.
| Stopwatch, Calculator, Find phone
| **Weather and Weather with UV index and air pressure**
The data in the watch is updated according to the weather data collected by the phone app.
**| My QR Code**
if you are using a QR code for certain activities or payments, it can be set
up in the watch. The settings can be made in the app .
Not all QR codes are supported.
---|---
| Breath training
Activate by tapping. Set intensity and release – inhale and exhale according to the display.
**| Wrist massage**
vibration for short relaxation
| Menu style
select your menu display
**| Setting**
Languages, Change the watch face, Screen timeout, Vibration intensity, BT calling, Password (for practical reasons we do not recommend setting up) and Restore factory settings.
Other functions must be set and allowed in the Wear Pro app,and their operation depends on both the specific phone model and
settings as well as the current version of the watch. These include various
notifications (calls, SMS, social media), alarm, remote shutter, do not
disturb mode, prolonged sitting reminder, display activation by wrist
movement, etc.
ttt
-
To save the values measured and the current date and time, make sure you synchronise the watch with the app on a daily basis. During the night, the values measured by the watch may reset.
-
This product is not a medical device. Neither the watch nor the app are intended for the diagnosis, treatment or prevention of illnesses and symptoms thereof. The values measured are illustrative and may differ from values measured by certified medical devices as well as because of the method of measurement and tightness of the strap. The sensor on the reverse side of the watch must be in contact with the wrist, and the strap must be tight. If the strap is loose and the sensors dirty, the precision of the measurements will be compromised.
-
In order to ensure correct date and time settings, the watch must be paired with a phone. Then the date and time will be set automatically.
-
We strongly recommend preventing the watch coming into contact with water. The watch is not to be used in wet environments, e.g. when bathing, swimming, showering, diving, etc. The watch is not water resistant and water may damage the interior. Attention must also be paid to hot (warm) water, steam, etc., as it may (due to wear and tear of the casing, mechanical damage or microscopic cracks in the seal) seep into the watch and cause damage. Upon coming into contact with water, immediately dry the watch thoroughly. Damage by water or steam is not covered by warranty.
-
You have stopped receiving incoming calls or SMS notifications – check that the watch is paired with your phone and the notifications are allowed in the app Notifications
and in the settings of your phone, and that the do-not-disturb mode has not been activated in the app. Make sure Bluetooth is on in your phone. Do not pair the watch via the phone’s Bluetooth menu. -
The watch cannot be paired with a phone – possible solutions:
- make sure the watch and phone are charged sufficiently
- make sure your phone’s Bluetooth and GPS are switched on and you have allowed your location/position to be determined in your phone’s settings
- place the watch and the phone next to each other
- check the system updates in your phone
- uninstall and re-install the app
- restart your phone and switch it off then back on again
- make sure your phone meets the technical requirements
(Android 5.1+, iOS 9.0+, Bluetooth 5.0+)
-
Sensor light is blinking – data measurement or transfer is underway.
-
The green sensor light blinks even when the watch is not being worn – it is not a flaw.
-
To ensure the correct function of the watch, it is recommended that it be restarted or reset occasionally and, where available, that firmware be updated in the app. Make sure you always have the most recent version of the app.
-
Always charge the watch for no more than 2 hours (at no more than 5 V). Improper charging reduces the capacity and useful life of the battery. Battery life depends on the ambient temperature and the number of functions actively running. When active, some functions may reduce battery life to several hours. Over time the capacity of the battery will reduce naturally. If not used, do not leave the watch out of the battery for an extended period of time and recharge the battery regularly.
-
Protect the watch from falls or impact; do not expose it to extreme temperature or direct sunlight. These conditions may cause malfunctions, or they can cause irreparable damage. Keep the watch at room temperature if not in use.
-
The watch has a built-in battery. Do not expose it to flames or extreme temperature due to risk of explosion.
-
Do not disassemble the watch or its accessories.
-
Do not use the product in close proximity to explosives and chemicals.
-
Keep the product out of reach of children. It may feature small parts posing risk of inhalation.
-
The watch software and the application itself are innovated on a continuous basis. Therefore, the manufacturer reserves the right to amend the instructions and individual functions without prior notice.
-
1 Should you have any questions, do not hesitate to contact the manufacturer.
Warning:
All images and description of functions may differ based on your version of
the product and are used for illustrative purposes only.
Safe disposal
Do not dispose of the product in general waste as it may contain substances
harmful to the environment.
Battery removal instructions
The product contains a built-in battery that may contain harmful substances
and, as such, should not be disposed of in general municipal waste. You can
remove the battery and hand it in for safe disposal. If you have decided to
remove the battery, we recommend that you contact a qualified expert. In any
case, let the battery run out completely and then use a knife to remove the
back cover carefully. One by one, snip the wires to the battery and remove
battery carefully so as to avoid damage to the battery and electrolyte
leakage. Use the proper PPE and follow the applicable occupational health and
safety rules to avoid injuries.
Electronic waste
Leave the product at a dedicated electronic waste collection facility where
its recycling or safe disposal is ensured. Contact your local municipality for
a list of waste collection sites, or you can leave the used product with the
seller.
Declaration of conformity
SMARTOMAT s.r.o. hereby declares that the ARMODD Silent watch 4 Pro device
complies with Directive2014/53/EU. The full version of the EU declaration of
conformity is available at this website:
www.armodd.com
TECHNICAL SUPPORT
Do you have any questions regarding your product? Do not hesitate to contact
us.
email: info@armodd.com
www.armodd.com
Manufacturer
SMARTOMAT s.r.o., 1.máje 97, 460 02 Liberec, Czech republic
References
- ARMODD – smart watch
- ARMODD.CZ |⌚️Elegantní chytré hodinky v češtině
- ARMODD – smartwatch
- ARMODD.HU |⌚️magyarul tudó elegáns okosórák
- ARMODD – smartwatche
- ARMODD.RO |⌚️ ceasuri elegante în limba română
- ARMODD – pametne ure
- ARMODD – inteligentné hodinky
- SMARTOMAT.CZ |⌚️elegantní chytré hodinky v češtině
- SMARTOMAT – inteligentné hodinky
- ARMODD – smart watch
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>