ARMODD Candywatch Crystal 2 Smart Watch User Manual

: June 12, 2024
: ARMODD

Table of Contents

ARMODD Candywatch Crystal 2 SmartWatch
Product description
Charging and switching On
Messages
Function menu
Settings
- Safe disposal
Battery removal instructions
Technical support
Documents / Resources

ARMODD Candywatch Crystal 2 SmartWatch

ARMODD-Candywatch-Crystal-2-Smart-Watch-PRODUCT

Thank you for purchasing our product.
Please read these instructions before use.
The manufacturer is not liable for any damage caused by improper use.

Product description

ARMODD-Candywatch-Crystal-2-Smart-Watch-
FIG-2

Charging and switching On

The watch must be fully charged before first use. Use the charging cable supplied with the watch. Always charge the watch for at least 2 hours and do not move it while it is being charged.
Connect the charging cable to the USB port of your notebook (it must be plugged in) or conventional mobile phone adapters (5 V) and attach the magnetic connectors at the opposite end of the cable to the charging contacts. While charging, the magnetic connectors of the charging cable must not come into contact with the strap or metal components. It could result in the charger short-circuiting or strap being damaged. Therefore, always charge the watch only with the strap detached.
If the watch’s display does not come on on its own, gently press the side button for at least 3 seconds.

Pairing the watch with a mobile phone

Watch settings, the current time and date and their proper operation require that the watch be paired with a mobile phone via the recommended Glory Fit app. Do not pair the watch to your mobile phone via your phone’s Bluetooth; al-ways use the app. You can download the app using the QR code below or look it up in Google Play or the App Store.

During installation, we recommend that you allow all authorisations that you will be requested, including the running of the app in the background.
Depending on your mobile phone model, we also recommend checking setting authorisations in the app management in your phone, especially location tracking.
Before pairing, activate Bluetooth (making sure it is visible for all devices for an unlimited time) and GPS in your phone. Do not pair the watch using the Bluetooth menu of the phone.
Open the Glory Fit app. It is recommended that you create an account.
The watch should be as close as possible to the phone during pairing.
Tap on the “Device” icon in the app (bottom ) and then on “Select device” (Fig. 1).
Select your device from the list of devices shown (Fig. 2).
Once the devices have been paired, set the watch functions in the app (Fig. 3).
To allow for more precise measurements, it is recommended that you fill in your personal profile in the app.

The images here depict the Android OS. The appearance in iOS may differ. will download (Fig. 5) to your watch face list – “My watch faces” and then tap on it to upload it into your watch.

Watch face settings

Successfully setting up the watch face requires that the watch and the mobile phone be charged sufficiently.
In the application, tap on the “Watch face settings” (Fig. 3), then on the tab “Custom watch face” and next
on the displayed watch face (Fig. 6). Then tap on “Select picture” (Fig. 7) and take a photo or select an image directly from your phone that you want to save. Crop the image and save it by tapping on “Crop”. (It may differ depending on model.) You may change the colour as desired and tap on “Use watch face” (Fig. 7). The image will be uploaded to the watch. In the event of an error message during the upload, please charge the phone and the watch and repeat the process.

Display activation by twisting the wrist

In your phone’s Glory Fit app, tap on “Wrist activation”.
(Fig. 3) and activate the function (Fig. 8).

Messages

Swipe your display (watch face) from bottom to top to display the messages page.
To receive messages and notifications (calls, social media), your watch must be paired with your phone, and the receipt of messages and notifications must be allowed in the Glory Fit app (Fig. 3). Furthermore, you must allow the app access to messages and notifications in the settings of your phone. (This is typically done during installation.)
Tap on a message to open it and tap on the recycling icon to delete it.

After setting, wait for the measurement to begin and end.

Training
Walking, Running, Cycling, Hiking, Yoga, Skipping, Badminton, Spinning, Sit- ups

Tap to start measuring and swipe the display to finish.

Sleep

This function monitors your sleep automatically at night, as long as you have your watch on. The sleep data will be displayed the following morning in the app as well as on the watch.

Phone’s music player

Tap to enter the music player menu. Tap to play/stop, skip one track forward or backward. The audio output is from the phone, which is why the watch must be paired with the phone.

Settings

Other functions must be set and allowed in the Glory Fit app, and their operation depends on both the specific phone model and settings as well as the current version of the watch. These include various notifications (calls, SMS, social media), alarm, remote shutter, physiological cycle (Fig. 9), do not disturb mode, prolonged sitting reminder, display activation by wrist movement, etc.

Important notifications, recommendations and FAQs

To save the values measured and the current date and time, make sure you synchronise the watch with the app on a daily basis. During the night, the values measured by the watch may reset.
This product is not a medical device. Neither the watch nor the app are intended for the diagnosis, treatment or prevention of illnesses and symptoms thereof. The values measured are illustrative and may differ from values measured by certified medical devices as well as because of the method of measurement and tightness of the strap. The sensor on the reverse side of the watch must be in contact with the wrist, and the strap must be tight. If the strap is loose and the sensors dirty, the precision of the measurements will be compromised.
In order to ensure correct date and time settings, the watch must be paired with a phone. Then the date and time will be set automatically.
The ingress protection rating of the watch is IP67. We recommend that you prevent the watch coming in contact with water under pressure, fast and powerful water currents and jets, hot water and steam because water may get into the watch while in use and damage it, resulting in wear or mechanical damage to the case and microcracks in the sealing. We do not recommend exposing the watch to abrupt pressure changes (such as when diving, in some water sports, etc.) or to liquids other than fresh water. Moreover, never use the buttons if the case is in contact with water; otherwise, water may penetrate and damage the watch. After contact with water, dry out the watch.
You have stopped receiving incoming calls or SMS notifications – check that the watch is paired with your phone and the notifications are allowed in the app [Notifications (Fig. 3)] and in the settings of your phone, and that the do-not-disturb mode has not been activated in the app. Make sure Bluetooth is on in your phone. Do not pair the watch via the phone’s Bluetooth menu.
The watch cannot be paired with a phone – possible solutions:
- make sure the watch and phone are charged sufficiently
- make sure your phone’s Bluetooth and GPS are switched on and you have allowed your location/position to be determined in your phone’s settings
- place the watch and the phone next to each other
- check the system updates in your phone
- uninstall and re-install the app
- restart your phone and switch it off then back on again
- make sure your phone meets the technical requirements (Android 5.1+, iOS 9.0+, Bluetooth 5.0+)
Sensor light is blinking – data measurement or transfer is underway.
Sensor light blinks even when the watch is not being worn
- it is not a flaw.
To ensure the correct function of the watch, it is recommended that it be restarted or reset occasionally and, where available, that firmware be updated in the app. Make sure you always have the most recent version of the app.
Always charge the watch for no more than 2 hours (at no more than 5 V). Improper charging reduces the capacity and useful life of the battery. Battery life depends on the ambient temperature and the number of functions actively running. When active, some functions may reduce battery life to several hours. Over time the capacity of the battery will reduce naturally. If not used, do not leave the watch out of the battery for an extended period of time and recharge the battery regularly.
Protect the watch from falls or impact; do not expose it to extreme temperature or direct sunlight. These conditions may cause malfunctions, or they can cause irreparable damage. Keep the watch at room temperature if not in use.
The watch has a built-in battery. Do not expose it to flames or extreme temperature due to risk of explosion.
Do not disassemble the watch or its accessories.
Do not use the product in close proximity to explosives and chemicals.
Keep the product out of reach of children. It may feature small parts posing risk of inhalation.
The watch software and the application itself are innovated on a continuous basis. Therefore, the manufacturer reserves the right to amend the instructions and individual functions without prior notice.
Should you have any questions, do not hesitate to contact the manufacturer.

Warning

All images and description of functions may differ based on your version of the product and are used for illustrative purposes only.

Safe disposal

Do not dispose of the product in general waste as it may contain substances harmful to the environment.

Battery removal instructions

The product contains a built-in battery that may contain harmful substances and, as such, should not be disposed of in general municipal waste. You can remove the battery and hand it in for safe disposal.
If you have decided to remove the battery, we recommend that you contact a qualified expert. In any case, let the battery run out completely and then use a knife to remove the back cover carefully. One by one, snip the wires to the battery and remove battery carefully so as to avoid damage to the battery and electrolyte leakage. Use the proper PPE and follow the applicable occupational health and safety rules to avoid injuries.

Electronic waste

Leave the product at a dedicated electronic waste collection facility where its recycling or safe disposal is ensured. Contact your local municipality for a list of waste collection sites, or you can leave the used product with the seller.

Declaration of conformity

SMARTOMAT s.r.o. hereby declares that the ARMODD Candywatch Crystal 2 device complies with Directive
2014/53/EU. The full version of the EU Declaration of Conformity is available at this website: www.armodd.com
Operation frequency: 2402–2480 MHz
Max peak output power: 1,83 dBm