ARMODD Kidz GPS 4G Watch User Guide

ARMODD Kidz GPS 4G Watch

User Guide

https://rebrand.ly/edl8qmw

Thank you for buying our product.

Please read these Instructions for Use prior to using the product. The manufacturer bears no responsibility for damage caused by improper use of the product.

Product Description

Charging and Starting

1. Prior to the first use, fully charge the watch. Always only use the original charging cable included in the package. Always charge for a maximum of 2 hours and do not handle the watch during the charging process.
2. Connect the charging cable to the USB port of a laptop connected to the mains, or a mains adaptor for regular mobile phones (5V) and attach the magnetic cable terminal on the other side to the charging contacts of the watch. After about 10 seconds, the watch will start charging.
3. Once charged, disconnect the charging cable and if the watch screen does not light up itself, push the side button for at least 5 seconds.

Watch Control

Hold the side button down for a while to switch on/off the watch or to activate the SOS call. (If the SOS phone number is set, the watch can only be switched off in the application).
Press the side button briefly to switch the screen on/off.
Scroll the functions by moving your finger on the screen (switch the screens, scroll the menu).
Click the screen to activate the required function.
Press the push button to go back or end the call.
Scrolling from the top down, the signal indication, notifications, battery status and time appear.

SIM Card

1. The Nano SIM card must support the GSM network (4G) and enable GPRS data transmission and Caller ID (caller ID display).
2. The monthly data capacity is usually up to 30 MB.
3. The watch operation is supported by most of the national operators, we do not recommend using a virtual operator.
4. Before inserting the SIM card, activate it first in a mobile phone – as recommended by the respective operator. It is necessary to activate both calls and data.
5. When activating the SIM card, cancel the PIN and remove the card from the mobile phone.
6. The watch must always be off when inserting the SIM card in the watch.
7. Pull out the body from the watch frame by pressing down on the screen. You will find the SIM card slot on the left side.
8. Then reset the watch to its original status – push the SIM card slot back into the watch and place the body back in the frame.
9. The cover must be attached properly to avoid penetration of water or dust.
10. Hold the side button down (10 sec.) to switch on the watch and wait for the SIM card to be read.

Watch Applications and Registration

For setting and proper functioning of the watch, it is necessary to install the SeTracker or SeTracker 2 application in the phone, from which you will set or control the watch. Download it using the QR code below or in Store Play/App Store.

Android

iOS

1. During the installation and subsequent registration, we recommend permitting all authorisations you will be enquired to confirm, including the application running in the background.
2. Based on the model of the phone used, we recommend checking the enabled setting also in the phone application manager, in particular, enabling of the position setting.
3. Open the application (choose the application language) and click on the “Register” button (Fig. 1).
4. Enter your e-mail, verification code and any password and confirm registration (Fig. 2).
5. After successful registration, click on “Start binding” (Fig. 3) and register the watch (Fig. 4) – see point 6. If you do not want to register the watch for now, you can register it later on, after logging into the application (Fig. 1).
6. After successful application login, click on “Add device” and scan the registration QR code of the watch (Watch menu – About device – Registration code), or from the label on the back side of the watch, or enter the registration ID below the QR code manually. Enter the “Device nickname” and select your picture. Click on “I am TA” to open the menu and confirm the selected picture by clicking on “Save” at the top right. Then confirm all by clicking on “OK” (Fig. 4). The watch is now registered for the given account.

Important Notice

1. Keep the label with the QR code and registration ID and the label with the IMEI code. Both numbers are very important for eventual re-registration of the watch.
2. The watch can be registered in the application only once. If you wish to add a person to also track the watch, you must enter the watch registration code in another mobile phone and confirm this requisition in the application of the phone, in which the watch was registered for the first time (Admin).
3. If you need to re-register the watch, it needs to be unregistered by the manufacturer first. In this case, you need to provide both numbers – see point 1.
4. If an incorrect password is entered several times in the application login process, it is necessary to wait for about 8 hours to repeat the login for security reasons.

Watch Setting in Application

1. The SIM card must be inserted in the watch (see the SIM Card section) and the watch must be switched on.

2. Open the application and click on “Setting” (Fig. 5) and set the required functions (Fig. 6).
   a. SOS phone numbers – you may set up to 3 phone numbers.
   b. Do Not Disturb – set a mode when the watch has the calls and messages locked for the time when the parent wishes the kid not to be disturbed. The SOS button will be functional.
   c. Profiles – vibrations/ringing, ringing, vibrations, mute.
   d. Tracking Frequency (Working mode) – you may choose from 3 modes. The local isation 10 min. mode is pre-set. You may also choose the standby mode (1 hour) or the current mode (1 min.)
   – higher demand for battery capacity.
   e. SMS Alerts – set notification of the battery to discharge soon, SOS notifications.
   f. Family members – display all members who can monitor the watch, including the administrator identification.
   g. Contacts (Phonebook) – create and administer the watch phonebook.
   h. Language and Time zone setting – set the language, time and date (East: GMT01:00 – daylight saving scheme).
   i. LBS (we recommend deactivating LBS for more precise GPS localisation).
   j. Remote Shutdown – switch off the watch remotely.

3. Messages/Chat – you can send a voice message (15 sec.) or a text message (50 characters) from the application. The message will be displayed on the watch and to all “Family members” with access to the application.

4. You can set other functions in the application, as well – e.g. “Security zone” (min. 200 m), alarm clock, pedometer, make a video-call (the application must have running in the background enabled) and others (Fig. 5).

5. Rewards – you can send an appreciation to the child’s watch that will be shown in the heart on the screen.

List of Watch Functions

Watch Face

Several options of setting the watch face – by holding down the button on the main screen – move to scroll and click to confirm.

Watch Menu

Swipe from right to left to open the menu – move to scroll, click on the icon to open the required function.

1. Contacts – contact details (pre-set by a parent in the application)

2. Messages – messages from the parent or family members from the application

3. Telephone – numerical keypad to dial the phone number (the function can be deactivated in the application)

4. Video chat – to chat by video:
   a) from the application in the parent’s phone: menu – video chat
   – start a video chat. Allows a two-way video chat between the phone application and the watch.
   b) from the watch: menu – video chat – select from contacts – ok.
   The called person must have the SE Tracker application opened to make the video chat.

5. Camera – taking pictures by pressing the “Camera” icon

6. Gallery – gallery of photographs (also displayed in the parent’s application)

7. Games – mathematical game, plan

8. Setting – watch setting

9. Pedometer – the parent activates the pedometer in the application (health)

10. Application – application download – enabled only in some watch models

11. QR code – watch QR code, QR code to download application modely hodinek

Note

The watch menu differs based on the specific watch model and may not contain all of the functions described above.

Troubleshooting

1. The watch cannot be registered in the application (registration ID does not exist or has already been registered) – contact the manufacturer.

2.  The watch is offline – check whether the SIM card
   a. is active (including data)
   b. has sufficient credit for calls and data transmission
   c. has the PIN cancelled
   d. supports 4G
   e. operator supports the watch function
   If everything is OK and the watch shows it is off-line, send the following text message from the phone to the watch SIM card:
   pw,123456,ts# Forward the received answer to us.

3. The watch runs out of charge quickly
   a. low quality of signal – SIM card keeps searching the signal
   b. SIM card is missing – the watch keeps searching the SIM card
   c. working mode 1 min. or 10 min. – set the standby working mode in the application

4. Contact technical support.

Important Notices, Recommendations and FAQ

1. Use only original accessories.
2. All values measured are only approximates.
3. Operation of some functions depends on the phone setting, as well as on the specific watch and application version.
4. To set correct data and time, the watch needs to be registered in the parent’s phone application. Date and time are set automatically after the time zone is set.
5. The watch has the IP67 protection. We recommend avoiding contact of the watch with water under pressure, fast and powerfully flowing water, water jets and hot water and steam because water might get into the watch and damage it as a result of wear and tear of, or mechanical damage to, the case, or microscopic cracks in the gasket. We recommend not exposing the watch to extreme changes in pressure (e.g. diving, some water sports, etc.) or liquids other than fresh water. Never operate the buttons if the case is in contact with water. The water might penetrate inside and damage the watch. Wipe off the watch after contact with water.
6. Never charge the watch for more than 2 hours (5V voltage – never above). Improper charging reduces the battery capacity and useful life. The battery capacity is mainly affected by the ambient conditions (e.g. temperature) and the number of activated functions. The battery may run out of charge in several hours when some functions are activated. The battery capacity naturally decreases over time. If you do not use the watch, do not leave them discharged for a long time and charge them from time to time.
7. To ensure proper operation of the watch, always upgrade the application to the latest version.
8. Protect the watch against fall and impact. Do not expose it to high temperatures or direct sun light. This may result in incorrect functioning of the watch or complete malfunctioning. Store the watch at the room temperature.
9. The watch contains an integrated battery. Do not put it in fire and do not expose it to extreme temperatures – there is a risk of explosion.
10. Do not disassemble the watch or accessories.
11. Do not use the product near explosives and chemicals.
12. In the case of disassembly or damage, keep the product out of the reach of children. It may contain small components which can be inhaled.
13. The watch software and application are upgraded on a continuous basis. Therefore, the manufacturer reserves its right to amend the instructions for use or the individual functions without prior notice.
14. In case of further questions, contact the manufacturer.

Note

The figures and function descriptions may differ based on a specific product and application version and are only approximates.

Frequency band : 2402–2480 MHz
Max. power: 1.06 dBm

Safe Product Disposal
Never dispose of the product in unsorted waste as it may contain substances posing an environmental hazard.

Instructions for Battery Removal

The product contains an integrated battery that may contain substances posing an environmental hazard. Therefore, it should not be disposed of in regular household waste. You may remove the battery and deliver
it for ecological disposal. If you have decided to remove the battery, we recommend contacting a specialist. In any case, let the watch discharge fully, remove the rear cover bolts and remove the cover. Then use the scissors to cut the individual battery conductors and remove it carefully to avoid damage and leak of electrolyte. Use personal protective equipment and respect the safe work principles to avoid injury.

Used Electrical Equipment

Deliver the product to the designated collection point that will ensure its recycling and ecological disposal. For information about the collection points, contact the relevant municipal authorities, or deliver the product directly to the dealer.

Declaration of Conformity

SMARTOMAT s.r.o. represents and warrants that the ARMODD Kidz GPS 4G device type complies with the Directive 2014/53/EU. Full version of the EU Declaration of Conformity is available on the following website: www.armodd.com

Technical support
Do you have a question about the goods purchased? Do not hesitate to contact us.
e-mail: info@armodd.com
www.armodd.com

Manufactured by:
SMARTOMAT s.r.o., 1.máje 97, 460 02 Liberec, Czech Republic

Customer support

info@armodd.com

References

• ARMODD – smart watch
• ARMODD.CZ |⌚️Elegantní chytré hodinky v češtině
• ARMODD.HU |⌚️magyarul tudó elegáns okosórák
• ARMODD – inteligentné hodinky
• Návody a prohlášení o shodě |⌚️ARMODD.CZ

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>